Showing 11 results for Abdollahi
M. Abdollahi Ezzatabadi, G.r. Soltani, A. Nejati,
Volume 5, Issue 4 (winter 2002)
Abstract
In this paper, a simple farm management information system is introduced. This system was administered through cooperation between farmers and an information agency. The results showed that the farmers were willing enough to accept the system. Nevertheless, having an accounting system is the first step toward the establishment of an information system, which is used by only %42 of the sampled farmers. The main reason for this is the lack of knowledge about the benefits of such systems. In other words, if farmers were aware of the benefits of accounting systems, they would accept them easily. The results also showed that the farmers who use accounting systems are more successful in their production activities.
M. Rahemi, A. Haj Abdollahi,
Volume 8, Issue 1 (spring 2004)
Abstract
Experiments were conducted during 1996-1997 in Nough of Rafsanjan to evaluate double pollination on fruit set and development of pistachio nut. In the first experiment, Owhadi cultivar was pollinated by a combination of pollen from Beneh (P. mutica F&M), Atlantica (P. atlantica Desf) and Soltani (P.vera L.). In the second experiment, Owhadi cultivar was pollinated by pollen from Beneh, Atlantica and Khinjuk (P. Khinjuk). The results showed that in the double pollination experiment, the nut, kernel and fruit set were affected more by the first pollen than by the second one. Pollen from the wild pistachio species reduced kernel weight, number of split nuts but increased percentage of the deformity and blank nuts in Owhadi. It was concluded that the effectiveness of the first pollen on fruit set, nut and kernel development was independent of the second one. The pollen of P. vera proved to be the best pollen source for pistachio cultivars.
J. Torkamani, M. Abdollahi Ezzatabadi,
Volume 9, Issue 3 (fall 2005)
Abstract
This study shows how multiobjective programming, compromise programming and filtering techniques could be used to manage scarce resources. Data were collected from a sample of 109 Rafsanjan pistachio producers. The aim of the program was to make a compromise between the objectives of profit maximization, the maximization of the area under pistachio gardens and also maximization of the groundwater use. The multiobjective programming approach and filtering techniques were used to find the efficient set among these objectives. A compromise between the objectives was established by the compromise programming method. Although none of the above three objectives achieved completely in the compromise solution, it became nearer to the ideal point on the assumption that the importance of three objectives was the same. By omitting this assumption and considering the objective weights based on decision maker preferences, the compromise solution might become nearer to the ideal point.
J. Abdollahi, N. Baghestani, M.h. Saveqebi, M.h. Rahimian,
Volume 12, Issue 44 (summer 2008)
Abstract
The present study discusses a method used to produce updated information about vegetation cover in arid and semi-arid zones, using RS data and GIS technique. In this method, Landsat ETM+ data in 2002 was collected in an area of about 60000 ha in Nodoushan basin, Yazd, Iran. To collect the necessary ground data, 50 sites of different vegetation types were selected and the percentage of vegetation cover in each one was determined. Also, different vegetation and soil indices were derived and crossed with located sampling points using ILWIS software capabilities. To get the best fitted curve, the relationship between vegetation cover, as a dependent variable, and satellite data bands, vegetation indices and environmental factors, as independent variables were assessed. Therefore, a multiple linear regression model was established for the prediction of vegetation cover percentage in the studied area. Finally, a vegetation cover map with high a precision was produced. As a conclusion, it can be said that mapping of vegetation cover via remote sensing is possible even if its vegetation cover is sparse.
M. Moghadas, A. R. Estabragh , J. Abdollahi,
Volume 16, Issue 62 (Winte - 2013 2013)
Abstract
Expansive soils swell and shrink periodically when subjected to seasonal water content changes. As a result, they are a constant source of problem in the design and construction of foundations. In this study, the behaviour of an expansive soil was studied through a number of experiments involving cycles of wetting and drying using three different water qualities. Laboratory tests were performed on statically-compacted samples of an expansive soil in a modified Oedometer under constant surcharge pressure of 10 kPa. Vertical deformation of the soil sample was recorded continuously, and during the test, void ratio and water content of the sample were determined at different stages. The results indicated that the equilibrium condition was reached after about six wetting-drying cycles. It is shown that the swelling potential changes with changes in water quality the saline water reduced the swelling potential of the soil compared to the distilled water during wetting and drying cycles. Furthermore, the results showed that the variations of water content-void ratio paths during wetting-drying were the same (no hysteresis) when the equilibrium condition was achieved
Sakineh Abdi, Mehdi Tajbakhsh, Babak Abdollahi Mandulakani, Mirhasan Rasouli Sadaghiani,
Volume 17, Issue 64 (summer 2013)
Abstract
The incorporation of plant residues in soils of arid and semiarid regions is a major principle of sustainable agriculture. This study was conducted at the research farm of Urmia University (37° 32’N and 45° 5’ E), Urmia, Iran during the 2009 and 2010 growing seasons. Five green manure crops were grown in four replications arranged in a randomized complete block design. The treatments included white clover (T.repens), sainfoin (Onobrychis viciaefolia), pearl millet (Panicum miliaceum), sorghum (Sorghum bicolor) and turnip (Eruca sativa). Changes in soil nutrient elements and nitrogen mineralization were measured during different time periods after plant residues incorporation to soil. The plants were irrigated 50% of field capacity during growing period. The results showed that the total nitrogen and NH4-N were influenced by type of green manure in both years. The lignin and cellulose were the main factors controlling N mineralization and residue decomposition. In the first and second year, the results indicated that pearl millet green residues resulted in the highest amount of soil organic carbon. Nitrate-N content reached the highest amount in sainfoin and white clover. In conclusion, white clover and sainfoin due to increasing total and mineral nitrogen for subsequent plants could be introduced as a proper green manure in water deficit conditions.
Gh. Vahabzadeh, A. Safari, M.h. Farhoudi, H.r. Abdollahi, H. Fathizad, Gh.r. Khosravi,
Volume 18, Issue 70 (winter 2015)
Abstract
In this research, sediment production and delivery amount by Darabkola forest roads was estimated using the SEDMODL model. To evaluate the model results, the sedimentation rate in the above roads was directly measured using rainfall simulator. Also, the paired t-test, BIAS, RE and RMSE were used to assess the results. The analysis showed that the rate of sediment production from study roads' surface using the SEDMODL model and direct measurement under the rainfall simulation were 420.97 and 341.19 tons per year, respectively, and rate of sediment delivered to the stream with sediment delivery ratios of 42% and 51%, respectively, was about 177.58 and 174.02 tons per year. Also, results of the statistical methods of BIAS, RE and RMSE for the aforesaid model were 0.04, 17.59 and 0.71, respectively, and at 95% confidence level, no significant difference was obtained between the observed and estimated data. Therefore, the aforesaid model has the appropriate accuracy and efficiency to estimate the sedimentation rate of the Darabkola forest roads. It was also found that from among the input parameters of model, longitudinal slope of road, precipitation and sediment delivery factors were the most influential factors in the sediment production and transport, respectively.
Z. Abdollahian Dehkordi, Kh. Abdollahi, S. J. Sadatinejad, A. Honarbakhsh, M. Nekooeimehr,
Volume 19, Issue 71 (spring 2015)
Abstract
Achievement to sustainable development is dependent upon integrated watershed management. In other hand without detailed analysis of the rainfall - runoff observations, high risk of flood predictions will be translated into flood-induced capital losses. Considering the fact that not always hydrometric data are available, using synthetic unit hydrograph is one of the most popular methods of flood simulations for ungauged watersheds. This method has operational limitation for duration of runoff but in Instantaneous Unit Hydrograph (IUH) assumed to all take place at a discrete point in time therefore can be converted into and desired durations.According to literature few studies have been focused on Laplace transforms, H2U-Nash Unit Hydrograph in Iran, this work is an attempt to investigate model performance in Jooneghan catchment, located in northern part of Karoon great basin.Laplace synthetic hydrograph was derived base on effective rainfall while H2U-Nash model was simulated using moments technique and lag time.The mean absolute relative error of Laplace transforms, H2U-Nash was 0.42 and 0.25 respectively. Visual interpretation and statistical comparison of Nash-Sutcliffe efficiency coefficient of the models confirms that H2U-Nash model performs better than Laplace transforms model.
A. Abdollahi, M. Norouzi Masir, M. Taghavi, A. Moezzi,
Volume 24, Issue 2 (Summer 2020)
Abstract
Nowadays, one of the ways to confront with the micronutrients deficiency is application of Nano materials to increase the availability of elements such as zinc for plants. Therefore, this study was conducted to investigate the effect of functionalized iron oxide nanoparticles and zinc sulfate chemical fertilizer on the zinc chemical forms in soil solution phase and its correlation with zinc concentrations and uptake in wheat. This study was carried out in a completely randomized design with three replications. Treatment consisted of functionalized iron oxide nanoparticles of Hydroxyl (OH), Carboxyl (COOH) and Amine (NH2), each at three levels (100, 200 and 300 mg.kg-1), ZnSO4 (40 kg.ha-1) and Control (without using iron oxide nanoparticles). At the end of the cultivation period, soil chemical properties such as pH, soil available zinc and dissolved organic carbon and concentrations and the uptake of zinc in plant were measured. The results showed that pH, available zinc and dissolved organic carbon content of soil solution were significantly affected by the treatments. The results obtained from the Visual MINTEQ Geochemical model showed that the highest amount of the free form of zinc (Zn2+) was obtained at the level of 300 mg.kg-1 of carboxyl iron oxide nanoparticles. Also, the experimental treatments significantly influenced the concentration of Zn-DOM species. The positive and significant correlation between Zn+2 and Zn- DOC species with the concentration and total Zn uptake of wheat indicated that these pools of Zn could be liable species in soil. The results of this study, therefore, showed that the application of functionalized iron oxide nanoparticles could help to improve soil conditions in order to increase the zinc availability for plants.
T. Tahmasbi, Kh. Abdollahi, M. Pajouhesh,
Volume 26, Issue 2 (ُSummer 2022)
Abstract
The runoff curve number method is widely used to predict runoff and exists in many popular software packs for modeling. The curve number is an empirical parameter important but depends largely on the characteristics of soil hydrologic groups. Therefore, efforts to reduce this effect and extract more accurate soil information are necessary. The present study was conducted to integrate fuzzy logic for extraction runoff curve numbers. A new distribution model called CNS2 has been developed. In the first part of this research, the formulation and programming of the CNS2 model were done using the Python programming language environment, then the model was implemented in the Beheshtabad watershed. This model simulates the amount of runoff production in a watershed in the monthly time step with the fuzzy curve number and takes into account the factor of rainy days, the coefficient of management of the RUSLE-3D equation, and the soils theta coefficient. The results indicated that the model with Nash-Sutcliff 0.6 and the R2 coefficient 0.63 in the calibration set and Nash index 0.53 and R2 coefficient 0.56 in the validation set had appropriate efficiency in runoff simulation. The advantage of the model is that distributive and allows for the identification of areas with higher runoff production.
S. Esmailian, M. Pajouhesh, N. Gharahi, Kh. Abdollahi,
Volume 27, Issue 3 (Fall 2023)
Abstract
Awareness of the number of changes in runoff and sediment on different slopes can be useful in modeling the production of runoff and sediment. Therefore, this study was conducted to investigate the production of surface and tunnel runoff and sediment in saline and sodic soils on different slopes. Saline-sodic soil was collected and transported to the laboratory. Laboratory experiments were performed on a soil bed in a rectangular flume at three different slopes (5%, 10%, and 15%) under simulated rain (30 mm/h) for one hour. An analysis of variance was used to investigate the effect of slope on runoff and sediment production, and the means were compared using Duncan's test at the five percent level using SPSS version 26 software. The results showed that there was a significant difference between the slopes of the runoff (P<0.001) and sediment (P<0.001). In the first minute of the experiments, due to the lack of moisture in the soil, the amount of runoff was low, but over time, the amount of runoff increased. It is because the pores are blocked by the dispersion of soil particles owing to the presence of sodium ions, which ultimately leads to a decrease in permeability. Similarly, in the last few minutes, outflow from the tunnel was observed, and this flow occurred only on slopes of 10% and 15%. The amount of sediment was also low in the first few minutes, which could be related to the low amount of runoff and the lack of sediment particle removal. Nonetheless, after the lapse of time, its amount increased, and the primary reasons were reduced permeability, increased runoff, and removal of fine particles from the soil surface.
