Showing 19 results for Nazari
M. A. Nazari, H. Shariatmadari, M. Afyuni, M. Mobli, Sh. Rahili,
Volume 10, Issue 3 (fall 2006)
Abstract
Sewage sludge and effluents, as cheap sources of irrigation water and fertilizer, can supply plants with water and nutrients however, contamination of these sources with heavy metals and the possibility of human food chain contamination using these sources should be considered. In this research, the effects of industrial sewage sludge and effluents on concentration of some nurtients, heavy metals and sodium and dry matter yield of wheat (Triticum aestivum), barley (Hordeum vulgare) and corn (Zea mays) were investigated. The experiment was carried out in a greenhouse using a complete randomized design with four replication. The treatments comprised well water, well water + sewage sludge(50 tons/ha), and three industrial effluents from Iran Polyacryl factory including the cooling tower, the over flow and the factory outlet effluents. Chemical analysis showed the following results: The concentration of the elements in the sludge and the effluents were below the critical contaminating levels. The application of the treatments did not supply enough nitrogen for corn the cooling tower effluent could not supply enough nitrogen for wheat and barley all the treatments supplied enough P for wheat. None of the treatments could supply enough P for corn. The cooling tower, over flow and the factory outlet effluents could not supply enough P for barley, the micronutrient and heavy metal concentrations in the plant tissues using the effluents and the sewage sludge were higher than those for well water the dry matter yield of plants’roots and shoots was highest using well water + sludge and in comparison with the well water, effluents could increase the shoot dry matter yield.
M. Salehi, A. Haghnazari, F. Shekari, H. Baleseni,
Volume 11, Issue 41 (fall 2007)
Abstract
In order to evaluate relationship between Different traits in lentils (lens culinaris Medik), a field study was conducted as an RCBD based design with 3 replications on Zanjan University Research Farm during spring of the year 2004. ANOVA analysis revealed significant differences for all characters except for the number of primery branches. Correlation analysis indicated positive and significant correlation between seed yield and harvest index, number of primery branches, pods/plant and biological yield, and grian yield. The result of the factor analysis also showed that the second factor including number of primery branches, pods/plant, grian yield, canopy width and seeds/plant was an important trait involved in the grian yield in lentil. In addition, cluster analysis helped divide the genotypes into four distance groups of large, medium, semi medium and low yields.
A. Rahimi Khoob, S.m.r Behbahani , M.h. Nazarifar,
Volume 11, Issue 42 (winter 2008)
Abstract
Air temperature prediction models using satellite data are based on two variables of land surface temperature and vegetation cover index. These variables are obtained by atmospheric corrections in the values for the above data. Water vapor, ozone, and atmospheric aerosol optical depth are required for the atmospheric correction of visible bands. However, no measurements are available for these parameters in most locations of Iran. Using the common methods, land surface temperature can be measured accurately at 2 ° C. Given these limitations, efforts are made in this study to evaluate the accuracy of predicting maximum air temperature when uncorrected atmospheric data from the NOAA Satellite are used by a neural network. For this purpose, various neural network models were constructed from different combinations of data from 4 bands of NOAA satellite and 3 different geographical variables as inputs to the model in order to select the best model. The results showed that the best neural network was the one consisting of 6 neurons as the input layer (including 4 bands of NOAA satellite, day of the year, and altitude) and 19 neurons in the hidden layer. In this structure, about 91.4% of the results were found to be accurate at 3 ° C and the statistical criteria of R2, RMSE, and MBE were found to be 0.62, 1.7 ° C, and -0.01 ° C, respectively.
A. Taghavi, Gh. Tahmasbi, A. A. Talebi, A. Zarnegar, A. Monfared, H. Nazarian,
Volume 12, Issue 45 (fall 2008)
Abstract
The species diversity of bumblebees was investigated in two provinces, Tehran (Fasham, Zayegan) and Qazvin (Alamut, Wikan) in central Alborz during 2005-2006. Three casts of queen, worker and male bumblebees were collected during spring and summer in six dates in the two mentioned regions. Sampling of adult bees in Wikan was done from 26 July 2006 until 19 September 2006, and in Zayegan from 24 May 2006 to 17 September 2006. In sum, eleven species were collected of which eight species were common in the two regions. Data of different species casts at two regions were analyzed by Excel ver. 6 and Ecological Methodology ver. 6. 1. 2 soft wares. Species diversity of two regions was determined and compared with three indices of Simpson, Shannon-Weiner and Brillion, and evenness was calculated with indices of Simpson, Camargo and Esmit-Willson. Species richness of two regions was compared in research. The obtained results showed species diversity, evenness and species richness were more observable in Wikan compared with Zayegan. Consequently, Wikan in comparison with Zayegan was more sustainable. Similarity of two regions was 0/46, showing many differences in terms of the kinds. Also, there were 8 similar species in the two areas.
M. H.nazarifar, R. Momeni,
Volume 15, Issue 56 (sumer 2011)
Abstract
Deficit irrigation is one of the strategies used to obtain products with maximum profits in recent years. In this context, research on determining appropriate levels of deficit irrigation is essential. Since determining the different levels of performance through field experiments is difficult, the use of simulation models is a strategy through which we can examine the water balance data, simulate the growth process, and to study different managerial scenarios. The purpose of this study was validation and evaluation of CropSyst, a plant growth model, to determine suitable cropping patterns in deficit irrigation conditions. Applying three deficit irrigation scenarios in model, with values of 10%, 20% and 30% on six crops, fava bean, bean, wheat, potato, sunflower and rice, we concluded that the applied deficit irrigation of 10% to bean, potato and beans, 20% to sunflower and 30% to wheat had been suitable, and it is better not to apply deficit irrigation in rice. Also, since in final selection, the rate of water productivity is one of the basic criteria in each crop mentioned above, determining net benefit based on drop index (NBPD) per cubic meter showed that the most NBPD is related to bean with 6853 Rials per cubic meters and the lowest amount is related to sunflower with a value equal to 2809 Rials per cubic meters.
A. Rahimikhoob, P. Saberi, S. M. Behbahani, M. H. Nazarifar,
Volume 15, Issue 56 (sumer 2011)
Abstract
In this study, the remote sensing statistical approach was used to determine the global solar radiation from NOAA-AVHRR satellite data in southeast of Tehran. This approach is based on the linear correlation between a satellite derived cloud index and the atmospheric transmission measured by the clearness index on the ground. A multiple linear regression model was also used to convert the five AVHRR data channels and extraterrestrial radiation to global solar radiation. The results of this study showed that multiple linear regression model estimated the solar radiation with an R2 of 0.93 and a root mean square error (RMSE) of 5.8 percent, which was better than the statistical approach.
M. Akbari, B. Nazari, M. Parsinezhad , H. Ebrahimian,
Volume 16, Issue 62 (Winte - 2013 2013)
Abstract
This study was conducted on subsurface drainage network under operation in Behshahr. DRAINMOD model was used to simulate drainage system using measured data in 2006. The model was evaluated to estimate soil hydraulic conductivity by comparing the measured and predicted values of water table depth and drain discharge for different values of hydraulic conductivity. The results of this method were compared with the results of output drainage water method (as a baseline method). Use of water table depth simulation results in estimating hydraulic conductivity model resulted in considerable error, while the simulation results of drain discharge rate could be used with good accuracy for estimating it. There was a small difference between the output drainage water method and the inverse solution of DRAINMOD model to estimate soil hydraulic conductivity (2.3 and 2.5 cm/h, respectively). Thus, the comparison between the measured and predicted values of drain discharge could be a good criterion to estimate soil hydraulic conductivity using the inverse solution of the DRAINMOD model
M. Bahari, A. Shahnazari,
Volume 19, Issue 72 (summer 2015)
Abstract
Transporting borrow materials for proper infrastructure of water channels to bear the load of such structures is important in the development plans. Therefore, in this research clay nanocomposite material with a weight ratio of %1 was added to the soil. Soil sample was taken from the bed of the C25 canal (distributary of GanjAfrooz diversion dam within Alborz project area) at various intervals and the depth of 1 meter. Unconfined compression strength and consolidation tests were performed on the selected soil. The results showed that the addition of nanoclay to the soil increased the rate of shear resistance, cohesion property and compressibility of soil, respectively, equal to 14.13, 14.13and 82.76 percent. Also, angle of failure and ultimate void ratio decreased. As a result, the addition of nanoclay to the soil makes soil strength and stability greater and there are no problems caused by bed erosion and transporting of borrow material for infrastructure of channel.
H. Nazaripour, Z. Karimi, M. Sedaghat,
Volume 20, Issue 75 (Spring 2016)
Abstract
Drought is a climatic anomaly that associates with a significant decrease (lack) of precipitation and water resources availability, which spreads on vast temporal and spatial scales, and significantly affects various aspects of life and environment. One of the most common methods of drought assessing and monitoring is calculating drought indices (DIs). Drought areal and temporal extent and its severity are determined by these indices. In this study, an aggregate drought index (Hydro-Meteorological) has been developed for the assessment of hydrological and meteorological droughts in Sarbaz river basin located in southeastern of Iran. The Aggregate Drought Index (ADI) comprehensively considers all physical forms of drought (meteorological, hydrological, and agricultural) through selection of variables that are related to each drought type. In this case, monthly values of Stream flow Drought Index (SDI) and Standardized Precipitation Index (SPI) indicators were used for four similar reference periods with principle component analysis and aggregate hydro-meteorological index was defined based on its first component. The study time span was set between 1981-82 to 2010-11, which begins of October in Iran. Results based on the aggregate drought index (ADI) revealed that a long period of hydro-meteorological drought occurred from 1999-2000 to 2005/06 in southeast of Iran, in which, 2003/04 water year has been extremely a drought year. The ADI methodology provides a clear, objective approach for describing the intensity of drought. This index is appropriately able to represent the behavior of Hydro-Meteorological droughts and recommended as an integrated index for assessing and monitoring of regional droughts. Finally, different states of hydro-meteorological drought have been extracted based on conventional regional thresholds, and have been modeled by Markov chain. This made the estimation of drought state transition frequency possible, and made the prediction of next drought state time more real. State transition frequency matrices, are the main instruments for predicting drought states in real time. Results of validation tests and conforming the predicted results with real data indicate that predicting hydrological drought state transitions in the study area using Markov chain method is valid.
N. Tavanpour, M. Aflatooni, N. Nazari,
Volume 20, Issue 78 (Winter 2017)
Abstract
This research is aimed to determine the contribution of sub-basins flow to total watershed flood in Khersan river basin located in Kohkilooyeh and Boyer Ahmad province. To do this, the rainfall-runoff model HEC-HMS was used to simulate peak runoff values for 11 sub-basins. HEC-HMS input was constructed using GIS. The results suggest that the change in different return periods is accompanied by small change in prioritization of flood-potential of the sub-basins; so that for return periods of 2, 50 and 100 years, the most contributions came from sub-basins 1 through 11, respectively. With respect to area and flow rate, contribution of sub-basins to watershed total flow was different. The effect of area was between 0.31 to 1.03 percent; namely, sub-basin 6 showed the highest rank and basin 7 showed the lowest one. With respect to peak flow rate, the effect of individual exclusion of sub-basins, resulted in contribution between 51.2 to 1004.2 m3/s, that is, sub-basin 6 showed the lowest effect and the sub basin 11 showed the highest contribution.
Z. Nazari, N. Khorasani, S. Feiznia, M. Karami,
Volume 22, Issue 1 (Spring 2018)
Abstract
The purpose of this research was source identification of aerosols in atmosphere using geochemical properties in the city of Kermanshah. The concentrations of twenty elements consisting of K, Na, Ca, P, Cu, Ni, Pb, Cd, Se, Zn, Fe, Mg, B, Cr, Co, As, Mo, V were analyzed by ICP for 55 soil samples (in the height range of 600-1600m) and 41 aerosols samples. Source identification of aerosels using geochemical tracers was performed in two steps. In the first step, appropriate combination of tracer elements with high ability in the resolation of aerosol sources was chosen using the means comparison test and discriminate analysis. In the second step, the multivariate mixing model was used to determine the contribution of aerosol sources (geological and geomorphology types) to the production of aerosols in the study area. The results obtained from determination of the contributions of sources of aerosols (geological and geomorphological types) showed the UF formation (consisting of red marl and sandstone), with the height of 0-1400 mand the slope of 0-5%, could be regarded as the main contributor to the production of aerosols located in the city of Qasreshirin.
H. Karimi Avargani, A. Rahimikhoob, M. H. Nazarifar,
Volume 23, Issue 3 (Fall 2019)
Abstract
In recent years, a lot of research has been done on the Aquacrop model, the results show that this model simulates the product performance for deficit irrigation conditions. But this model, like other models, is sensitive to values of independent variables (model inputs). In this research, the sensitivity of the Aquacrop model was analyzed for 4 input parameters of reference evapotranspiration, normalized water productivity, initial canopy cover percentage and maximum canopy cover for barley. Irrigation treatments included full irrigation and two deficit irrigation treatments of 80% and 60%, the experiment was done in 2014-15 growing season in the field of Abourihan College. The values of measured biomass were used as the base values for treatments. The Beven’s method (Beven et al., 1979) was used for sensitivity analysis of Aquacrop model. The results showed that the model is most sensitive to the reference crop evapotranspiration, So the sensitivity coefficient for this parameter for full irrigation treatments, 80% full irrigation and 60% full irrigation were -1.1, -1.2 and -2.3 respectively. The negative sign indicates that if the value of reference evapotranspiration input is exceeded the actual value into the model, Yield performance is simulated less than actual value. In the meantime, the higher the degree of deficit irrigation, the greater the sensitivity of the model.
M. Arabfard, A. Shahnazari, M. Ziatabar,
Volume 23, Issue 4 (winter 2020)
Abstract
Localized irrigation methods can be used to manage low water holding capacity in the sandy soils. In this research, the effects of different irrigation systems including pot, tape and drip irrigation with gravity pressures of 0.5, 1.5 and 3 meters on the sandy soil moisture distribution under watermelon cultivation were compared with the furrow irrigation as the control treatment. The moisture content of the soil at different depths and at the distance of 5 and 20 cm from the plant was measured using the TDR device. Water distribution study showed that in the pot irrigation method, the moisture content of different depths of soil was kept constant by 16% during the irrigation interval, but the highest moisture content was observed in gravitional drip irrigation treatment at the depths of 40, 50 and 60 cm; in contrast, the lowest amount of moisture was observed in the pot irrigation treatment. In tape and gravitional drip irrigation system with gravity pressure, in addition to the adjustment soil moisture up to 15 to 22% within the wetting front, soil moisture can be kept almost constant by pulsed irrigation technique. Therefore, while providing the use of drip irrigation system with minimum water pressure available in most of the agricultural land (0.5 m), using pot irrigation can ensure sandy soil moisture retention and soil for the cultivation of fruits such as watermelon plants.
F. Haghnazari, M. Ghanbarian Alavijeh, A. Sheini Dashtegol, S. Boroomand Nnasab,
Volume 25, Issue 1 (Spring 2021)
Abstract
Changes in soil infiltration cause changes in irrigation efficiencies; therefore, estimating it in calculating irrigation efficiencies provides a more accurate estimate of irrigation performance indicators. In a study conducted on ARC2-7 farm in Amirkabir agro-industry in the 2010-2011 crop year, during four irrigations; two furrows were selected in terms of uniform infiltration and variable infiltration with a length of 140 and a width of 1.83 m. In the furrow assuming uniform infiltration two flume type II, at the beginning and end of it, were installed and the cumulative infiltration was determined by the volume balance method. The furrow with variable conditions was divided into four sections by installing five flumes. By examining the spatial variations of the mean cumulative infiltration, its value decreased from the first to the fourth section for the first irrigation by 15% and for the subsequent irrigations by 13%. Temporal changes of cumulative infiltration decreased by 27 and 30% for the first and second sections and by 26% for the third and fourth sections. An 11% increase in the average weight of the aggregate diameter and a 7% decrease in bulk density indicate physical changes in the soil. Surface runoff losses increased from 8 to 18.77% in the furrow assuming uniform infiltration and from 10.91 to 19.77% in the furrow with variable infiltration, and application efficiency decreased by 6%.
S. Banihashemi , S. S. Eslamian, B. Nazari,
Volume 25, Issue 2 (Summer 2021)
Abstract
The upcoming climate change has become a serious concern for the human society. These changes, caused and aggravated by the industrial activities of the international community and the increase in the concentration of greenhouse gases in the atmosphere, are seen as a threat to the food security and environment. Temperature change and precipitation are studied in the form of different probabilistic scenarios in order to have an outlook for the future. The present study was conducted to address the effects of climate changes on temperature and precipitation in Qazvin plain in the form of five AOGCMs including Hadcm3, CSIRO-MK3, GFDL, CGCM3 and MICROC3.2, and 3 greenhouse gas emission scenarios of A1B, A2 and B1, based on different possible scenario combinations in the next 30 years, 2021-2050 and 2051-2080 (near and far future). On basis of the study results, all 4 target stations, on average, will have experienced a change between two ratios of 0.5 and 1.4 of the observed precipitation period by the end of 2050, and the mean temperature will have had a change between -0.1 to 1.6 °C, relative to the observed period. By the end of 2080, the precipitation will also have fluctuated between the two proportions of 0.5 and 1.7 times of the observed precipitation period and the mean temperature will touch an increase between 0.6 and 2.6 °C. Both SPI and SPEI indices suggest the increment in the number of dry periods in the near and far future. However, the total number of negative sequences differed considering the 3, 12 and 24-month intervals at the stations level. Given the SPEI index, as compared to the base period, the total negative sequences of drought and number of dry periods will increase at 3 stations of Avaj, Bagh-Kowsar and Shahid-rajaei-powerhouse and decrease at Qazvin station in the future; however, SPI gives different results, such that for Bagh-Kowsar, there will be an increase in both total negative sequences of drought and number of dry periods, as compared to the baseline period; three other stations will have more dry periods, specifically, but less total negative sequences. The results reported that the drought events would become severe, and the wet events would become extreme in the future.
F. Zarei, M.r. Nouri Emamzadehei, A.r. Ghasemi Dastgerdi, A. Shahnazari,
Volume 26, Issue 4 (Winiter 2023)
Abstract
The pattern of root distribution in layered soils is one of the significant issues in the calculations of soil water and irrigation management and planning. The objective of this study was to determine the pattern of root distribution of soybean in layered soils and its effect on water uptake. The research was conducted in a completely randomized design with 15 treatments consisting of three different textures of soil (light, heavy, and medium) in four replications. The pattern of root distribution was monitored by the sampling of columns at the end of the growth period of the soybean. It was observed that the presence of the layer with medium texture has led to better plant development and growth after comparing the treatments in terms of plant growth. In general, root length density decreased with increasing soil depth, except in cases where there were different layers of soil, and root length density takes place in the following order: root length density in layers with medium texture≥ heavy texture≥ light texture. The rate of root water uptake rate was highest in the sandy layers, intermediate in clay, and lowest in loamy texture. Also, the rate of root water uptake rate increased significantly with increasing depth regardless of treatments. It can be concluded that the pattern of root distribution and plant growth is significantly affected by soil texture and its stratification.
H. Nazaripour, M. Hamidianpour, M. Khosravi, M. Vazirimehr,
Volume 26, Issue 4 (Winiter 2023)
Abstract
In this study, the decade variability of frequency and severity of drought in Iran has been investigated. The one-month scale data from the standardized precipitation-evapotranspiration index (SPEI 01) in the period 1956 - 2015 have been used. Based on the common numerical thresholds, the characteristics of the frequency and severity of drought for each pixel have been calculated and they are the basis for the analysis of the drought situation. Then, the frequency of drought severity classes was calculated and its trend was investigated using the non-parametric Mann-Kendall test. The findings indicated the spatio-temporal variability of drought frequency and intensity patterns in Iran. The frequency of mild droughts has decreased from south to north and from east to west; while the frequency of more severe droughts has increased from north to south and from west to east. The frequency of mild droughts in the southeast, northwest, and northeast has increased by 5 to 40 percent. While the frequency of more severe droughts in most parts of Iran has increased between 10 and 20 percent. Variability in the frequency of more severe droughts is more pronounced in the Central Plateau catchment area as well as in the Persian Gulf-Oman Sea. The trend of drought intensity is decreasing (drought intensification) at the same time as the prevailing rainfall regime in Iran. A significant increase in drought intensity (wet season intensification) is observed only in southeastern Iran at the same time as the monsoon regime. However, extra-arid and arid regions of southeastern Iran are affected by the frequency and severity of drought and have a high degree of vulnerability.
Z. Nazari, M. Moeinaddini, S. Zare, R. Rafiee,
Volume 27, Issue 1 (Spring 2023)
Abstract
Due to the environmental problems caused by wind erosion, it is necessary to stabilize the dust centers with mulches. The objective of the present study was to determine and compare the optimum vinasse mulches based on mechanical indicators for sensitive soil stabilization to wind erosion. In this research, vinasse (0, 100, 200 g) is combined with bagasse (0, 25, 50 g), ash bagasse (0, 25, 50 g), filtercake (0, 12.5, 25 g), and one-liter water (81 treatments). At first, the treatments were determined in the appropriate range of salinity and acidity (35 treatments) and in the next step, the mechanical indicators have been measured after mulching on laboratory trays (2×30×100 cm). Optimum mulches have been determined based on five indicators by mean comparison (Duncan). The mean comparison showed that treatments 33, 30, 34, 32, and 19 show the mean difference between the groups based on layer thickness, impact resistance, compressive strength, and shear strength properly. It can be concluded that vinasse (100 and 200 g) with 50 g bagasse reduces the crack coefficient greatly, and the application of vinasse, bagasse, and filtercake does not affect the compressive strength and impact resistance.
A. Shahnazari, S. Sadeghi,
Volume 27, Issue 2 (Summer 2023)
Abstract
In the present paper, crop pattern criteria have been evaluated relying on sustainable development to increase agricultural water productivity. Seven criteria were selected as the main environmental and economic criteria and were prioritized and reviewed for important and strategic products in the Tajan catchment of Mazandaran province. Criteria prioritization was done using optimization through a genetic algorithm with an objective function based on sustainable development. Then, physical and economic productivity indices were calculated to determine the productivity value. Based on the results, in the selection of the crop pattern, firstly, the category of economic criteria and finally the category of environmental criteria have been given attention to the farmers in the current situation. But in the genetic optimization algorithm, all priorities have a similar order from the environmental point of view and then from the economic point of view although each product has its order of criteria. By this prioritization, the parameters of the cultivated area, the volume of water consumed, and the amount of chemical fertilizers have decreased on average by 26%, 34%, and 21%, respectively, and the parameters of product performance and profitability have increased by 43% and 61%, respectively. In addition to providing environmental standards and increasing sustainable development, this prioritization causes an average increase in physical productivity by 84% and an increase in economic productivity by 72%.
