Search published articles


Showing 7 results for Shaker

A Shaker Ardekani, M Shahedi, G Kabir,
Volume 13, Issue 47 (4-2009)
Abstract

Pistachio processing, such as production of pistachio butter, is one of the ways to increase the added value of pistachio. Pistachio butter is a paste containing mainly milled, roasted pistachio kernel and sugar. In this investigation, the effect of two emulsifiers (lecithin and mono-di glycerids) at three levels of 0.0, 1.0, 2.0%, on the oil leakage and the effects of BHT as an antioxidant at three levels of 0.00, 0.01 and 0.02% on the peroxide values of pistachio butter and paste after 4 months storage at 20 °C were studied. Each experiment was performed in triplicates. Rheological and organoleptic tests were performed on the finished products. The results were statistically analyzed by a completely randomized Design and by making comparisons between the means via multiple range Duncan's test (P <0.05). Roasting of the pistachios at 110°C for 15 min was the best condition as determined by taste panelists. Moreover, addition of 15-25% of sugar in butter formula, received the best score by the panelists. The results of organoleptic tests showed that the sample containing lecithin and mono-diglycerides had the least leakage of oil. Based on the results, pistachio butter produced in this investigation received higher score in terms of flavor and texture than industrial pistachio butter in the market. Results also showed that addition of BHT had a significant effect on shelf life of pistachio butter. Rheological experiments showed that pistachio butter produced in this investigation was 1.5 times softer than its industrial counterpart. The results indicated that the best formula for production of pistachio butter was 72.99 - 82.99 % roasted pistachio kernels, 15-25 % sugar, 1% lecithin, 1% mono di glyceride and 0.01 % BHT.
S. Shakeri, S. A. Abtahi, N. A. Karimian, M. Baghernejad, H. Owliaie,
Volume 19, Issue 73 (fall 2015)
Abstract

The aim of this study was to assess the kinetics of nonexcheangable potassium release in surface and subsurface soil horizons, using organic and inorganic extractions, in Kohgilouye-va-Boyerahmad Province. Kinetics of K+ release was studied by successive extractions of K from 64 selective surface and subsurface soil samples, using 0.01 M CaCl2 and 0.01 M oxalic acid, for 1948 h, with two replicates. Nonexchangeable K+ release was fitted by Elovich, Pseudo-first order, Power function and Parabolic equations. Result showed that the average nonexchangeable K+ released (extracted by 1M HNO3) was 356 mg/kg, while those extracted by CaCl2 and oxalic acid after 1948 h were only 58% and 52% of the total amount of nonexchangeable K+ of the soils, respectively. In all soil samples, nonexchangeable K+ released by oxalic acid was less than that released by CaCl2, due to the high buffering capacity resulting from high carbonates in the soils. Potassium release rate in Elovich and Parabolic equations were significantly correlated with non-exchangeable potassium and some physical and chemical characteristics.  Based on high Coefficients of determination (r2) and low Standard errors (SE), Elovich, Power function, First order and Parabolic equations were selected as the best equations for prediction of K+ release from the soils.


S. Shakeri,
Volume 22, Issue 1 (Spring 2018)
Abstract

Potassium fixation is one of the most important factors influencing the availability of this ion for plants. This research was carried out to evaluate the relationship between potassium (K) fixation with some physical and chemical characteristics of soils and clay minerals and to investigate the effect of the dry and wet cycle on potassium fixation in Kakan Plain, in Kohgilouye & Boyerahmad Province. To measure the amount of Potassium fixation, four levels of K were added to the samples and the samples were shaken for 24 h and then dried in the oven at 50°C for 24 h. The drying and wetting cycle was repeated three times. Another set of soil samples was similarly incubated for a period similar to the previous treatment, but drying was performed at room temperature in an equilibrium state. The results showed that potassium fixation was increased with the potassium concentration increment, whereas K fixation percentage was reduced. Also, potassium fixation showed a positive significant relationship with cation exchange capacity (CEC) as well as clay content, in both normal and dry and wet treatments, and a negative significant relationship with organic carbon. Moreover, potassium fixation was enhanced with the increase of smectite content in both normal and dry and wet treatments. Besides, due to more organic carbon and less smectite, surface horizons fixed K less than the subsurface horizons.

S. Shakeri, S. A. Abtahi,
Volume 22, Issue 4 (Winter 2019)
Abstract

This research was carried out to assess the origin and clay minerals characteristics and their relationship with potassium forms in the calcareous soil of this region, with the humid climate conditions. Based on aerial photos and topographic maps, physiographic units were separated and soil sampling was done in each diagnostic horizon. The results showed that smectite was the main and dominant clay mineral in the study area. In well-drained pedons, the convincing process for smectite abundance seemed to be mainly the transformation of palygorskite and mica. According to the results, the exchangeable potassium in the surface horizon was higher than that of the subsurface horizons. The main reason for the higher level of exchangeable K in the soil surface, was more smectite and organic carbon. The results revealed that unlike exchangeable and non-exchangeable K, because of the suitable conditions like temperature and humidity in surface horizons, the relative mean of structural K in the surface soils was less than that in the subsurface. Also, since an increase in calcium carbonate resulted in a decrease in amount of clay and the amount of relative clay minerals (dilution effect), the amounts of exchangeable, non- exchangeable and structural K were decreased.

E. Shaker, S. M. Kashefipour, M. Shafai Bajestan,
Volume 23, Issue 4 (winter 2020)
Abstract

Erosion under the conveying pipeline affected by river flow at the cross to rivers is one the important reasons for breaking the pipelines that can lead to leakage. While the mechanism of erosion under the conveying pipeline in steady flow has been studied by many researchers, studies have shown the importance of scouring research in flood times under unsteady conditions. So, this study has been concerned with the investigation of bed river erosion under the conveying pipeline at the conflict of river in unsteady condition. To achieve this aim, some effective hydrograph’s parameters were changed in different scenarios and the results were compared to the steady condition. The result showed the erosion’s ratio of unsteady condition to steady one was 34 to 69 percent. Also, the rise of flood hydrograph’s peak led to increasing depth erosion from 7% to 22%.

S. Shakeri, A. Azadi, M. Saffari,
Volume 24, Issue 4 (Winter 2021)
Abstract

Determining the relative distribution of each chemical form of the elements and their relationship with the physical, chemical, and clay mineralogical properties of soils can help researchers to achieve the sustainable agricultural management. The present study was conducted to evaluate the chemical forms of four micronutrients (Zn, Cu, Fe and Mn) in some surface and subsurface soils of Kohgiluyeh and Boyer Ahmad province and their relationship with the physical, chemical and mineralogical properties of the soils. The results showed that the exchangeable and sorbed chemical forms of the studied elements were very low and negligible, but the residual, carbonate, and organic forms had the highest to lowest values of the chemical forms of these elements, respectively. Examination of the correlation of the chemical forms of these elements with soil properties showed the effective correlation of organic carbon values with the Zn chemical forms; also, there was a correlation between clay, silt, cation exchange capacity and calcium carbonate and the chemical forms of Cu, Fe and Mn. The correlation between the quantities of clay minerals and the chemical forms of these elements showed that the amounts of different forms of the studied elements were directly related to 2:1 clay silicate minerals (especially vermiculite). Evaluation of Fe and Mn chemical forms  also showed that the amounts of these elements were higher in the  soils with developed profiles (Alfisol and Mollisol), the  wetter climate and zeric moisture regime rather  than in soils with non-developed profiles (Entisols and Inceptisols) and a drier climate and a ustic moisture regime. In general, the results showed that variations of soil forming factors such as climate (as well as the  total amount of each micronutrients), could be effective on the chemical forms of micronutrients (especially on Mn and Fe);  these can be effective in the management of weakly to highly-developed soils orders.

Z. Feizi, A. Ranjbar Fordoee, A.r. Shakeri,
Volume 27, Issue 2 (Summer 2023)
Abstract

Maintaining soil structure and stability is essential, especially in arid and semi-arid regions with poor soil structural stability. Destruction of soil and its crust can cause wind erosion and desertification. The objective of this study was to investigate the effect of using hydrogel nanocomposite mulch on the stabilization of sand surfaces. A wind tunnel test was used to evaluate the erodibility of samples treated with different amounts of hydrogel nanocomposite. The compressive strength of the samples was measured by a manual penetrometer. The prepared nanocomposites were examined using scanning electron microscopy (FE-SEM), infrared spectroscopy (FTIR), and X-ray diffraction (XRD) images. The results of the wind tunnel showed that the addition of hydrogel nanocomposite to the samples improved the soil erosion rate by 100% at a speed of 15 m/s compared to the control sample. Bonding between sand particles by spraying hydrogel nanocomposites improves the erodibility of sand. Measurement of mechanical strength of treated samples after 30 days showed that the resistance of the crust increased with increasing the amount of nanocellulose in the composite, which can be expressed due to the increased surface area of the nanoparticle and the possibility of further bonding of the nanocomposite polymer bed with sand particles. While the crust diameter showed no significant difference with increasing concentration and the sample treated with nanocomposites containing 3% nanoparticles was thicker compared to other samples.


Page 1 from 1     

© 2024 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb