Search published articles


Showing 6 results for bakhtiari

J. Abedi Koupai, A. Bakhtiarifar,
Volume 8, Issue 3 (fall 2004)
Abstract

Water crisis is an important issue in arid and semi-arid regions like Iran. The situation has been getting more worse over recent years drought. Hence, there is a growing need to utilize low quality water where freshwater is scarce. In this regard, urban wastewater is a promising source but there are concerns about the environmental and health aspects of using such water. The main problem regarding the performance of trickle irrigation system utilizing wastewater effluents is clogging of the emitters. In this study, field trials at pilot scale were carried out to investigate the hydraulic properties of emitters using two types of water including treated wastewater and groundwater. The trickle irrigation system consisted of three 16 mm lateral tubes placed at 300 mm spacing in the main tube and each lateral tube had 16 emitters at 300-mm spacing. The designed discharge of the emitters was 4 L/h. The hydraulic properties of the different commercial emitters (micro flapper, long path, turbo plus and Eurokey) were assessed at different time periods. The results indicated that the Eurokey and long path emitters had the maximum and minimum emission uniformity, respectively, when applying wastewater. using groundwater, the Eurokey and turbo plus emitters had the maximum and minimum emission uniformity, respectively, during the initial phase of the study. However, the Eurokey and long path emitters had the maximum and minimum uniformity values, respectively, at the end of the study. The turbo plus emitters are regulated and, as a result, showed no evidence of sensitivity to pressure variations hence, they can be used on uneven lands and where the trickle irrigation system has long lateral tubes.
M. R. Bakhtiari, M. Loghavi,
Volume 12, Issue 44 (summer 2008)
Abstract

In the conventional methods of herbicide and fertilizer application, a substantial amount of toxic chemicals is sprayed or broadcast into the furrows, which is later washed away by irrigation water and may contaminate ground water, human and animal environment. If herbicide and fertilizer application could be limited to the most needed parts of the field rather than overall broadcasting, the mentioned problems could be alleviated and the application efficiency could also be increased by reducing the consumption rate. In an attempt to achieve this goal, a combination cultivator capable of simultaneously performing cultivation practices such as weed control (mechanical + chemical), fertilizer application and pest control was developed and evaluated. This machine was able to perform band spraying (fungicide, insecticide and herbicide) and mechanical cultivation (within-the-row weed killing, furrow reforming and hilling) simultaneously and properly. The combination cultivator was able to reduce herbicide consumption up to 66%.
B Bakhtiari, A.m Liaghat, A Khalili, M.j Kjanjani,
Volume 13, Issue 50 (winter 2010)
Abstract

In this study, the Penman-Monteith methods proposed by the Food and Agriculture Organization (FAO-56) and American Society of Civil Engineers (ASCE) were used for hourly ETo estimation under the semiarid climate of Kerman, Iran. Hourly ETo estimations obtained from the proposed methods were compared with measured ETo values by using a large weighing electronic lysimeter during April to September 2005 (totally 3352 hourly ETo data cases). Simple linear regression and statistical factors such as root mean square error and index of agreement were used for estimated and observed value comparison. The average of measured and estimated hourly ETo values using these methods for integrated data were 0.28 and 0.23 mm hr-1, respectively, which means that average estimated ETo values were approximately 21 percent less than the measured ETo values. This analysis was also performed for hourly data of each month during the study period. The results showed that FAO-56 Penman-Monteith underestimated ETo values by 18.4, 19.3, 26.3, 20.4, 21.4 and 22.1 percent for April to September, respectively, when compared with the measured values. Similarly, the ASCE Penman-Monteith underestimated ETo values by 17, 19.6, 18.4, 18.2, 19.7 and 20.9 percent for the same period, respectively, when compared with the lysimetric data. Finally, a set of regression equation for transformation of the estimated hourly data into the measured hourly ETo values has been presented for each month.
K. Qaderi, R. Jafarinia, B. Bakhtiari, Z. Afzali Goruh,
Volume 22, Issue 1 (Spring 2018)
Abstract

The investigation of local scour below hydraulic structures is so complex that makes it difficult to establish a general model to provide an accurate estimation for the local scour dimension. During the last decades, Data Driven Methods (DDM) have  been used extensively in the modeling and prediction of unknown or complex behaviors of systems One of these methods is Group Method of Data Handling (GMDH), that is a self-organization approach and increasingly produces a  complex model during the performance evaluation of  the input and output data sets. So, the objective of this study was to investigate the potential of the GMDH method in the accurate estimation of local scouring geometry (maximum scour depth, the distance of maximum local scour depth till Ski-jump bucket and length of local scour) below the Siphon spillway with Ski-jump bucket energy dissipaters for a set of experimental data. 80% of data set was used for the training period and the remaining data set was used for the test period. The average values of MSRE, MPRE, CE and RB for the nonlinear second order transfer function (FUNC1) were calculated to be 0.92, 0.02, 8.74, -0.01; also, for the nonlinear first order transfer function (FUNC2), they were 0.85, 0.02, 10.43 and -0.02, respectively. The results indicated that the performance of FUNC1 was better than FUNC2. Also, the value of the coefficient of determination (R2) for the estimation of local scour dimension using different methods such as s linear regression, nonlinear regression and ANN indicated the high performance of the developed model of GMDH in the accurate estimation for local scour dimensions.

K. Kakaei, A. Riyahi Bakhtiari,
Volume 22, Issue 1 (Spring 2018)
Abstract

Landfill sites are one of the most important sources of contaminant entry to the environment. In this research, the concentrations of Cu, Pb, Ni, Cd, and organic compound BPA in Hamadan landfill were evaluated to determine the status of its burial environment in 2014. Seven water samples (2 samples from spring and 5 samples from well), 2 leachate samples and 15 soil samples were collected from Hamadan landfill. Evaluation of the concentrations of Cu, Pb, Ni, Cd and the organic compound BPA was done by atomic absorption and gas chromatography with mass spectrometry. The concentrations of metals (Cu, Pb, Ni and Cd) in water samples (wells and springs) Pb <Cu <Cd <Ni, the leachate samples Cu <Pb <Ni <Cd and finally, the soil samples Cd <Cu <Pb <Ni, were obtained, respectively. Water samples (wells and springs), only in a 7W handheld water well sample (the nearest to the buried well) related to BPA 22.35 (μg /l) composition, waste leachate samples for the concentrations of BPA, 103.3 (μg /l), and soil samples for the combined concentration of BPA 5.52 (ng /g) were obtained. High concentrations of Ni, Pd and Cd and high concentrations of BPA in the samples of leachate composition, soil samples of landfill, and the 7W handheld water well samples were due to the high volume of electronic waste and plastic waste.
 

N. Alian, M. M. Ahmadi, B. Bakhtiari,
Volume 23, Issue 4 (Special Issue of Flood and Soil Erosion, Winter 2019)
Abstract

One of the most important problems in flood manegment is the damages induced by this phenomenon. Expected annual damage (EAD) is an important index for basin vulnerability against flood. Prediction of flood damages requires the analysis of spatial and temporal risk and must be calculated by the combination of hydrologic, hydraulic and economic models. In this research, the uncertainty was considered in the flood risk analysis. The probability of flood occurrence was calculated by the parabolistic model. By using the river analysis systems software (HEC-RAS) and the geographic information system (GIS) and utilizing the Google-Earth software, the floodplains of Zayande Roud river in Esfahan province were investigated with the  return period of 25, 50, 100, 200 and 500 years. The Monte Carlo method was also sed to perform the uncertainty analysis in the proposed method. The logarithmic persion type III was selected as the best distribution of flood. The damage-stage relationship was calculated as well. Based on the uncertinity analysis, the river discharge could be regarded as the major parameter in the uncertainty of EAD.


Page 1 from 1     

© 2024 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb