Showing 7 results for Compressive Strength
J. Abedi- Koupai , S. S. Eslamian1, S. A. Gohari , S.a Gohari , R. Khodadadi ,
Volume 14, Issue 54 (1-2011)
Abstract
Channel lining is essential to increase resistance against scour, reducing water losses and as a result increase water conveyance efficiency. Since the canal lining has significant costs, selection of type of lining must be made with great care and with considering engineering properties. One of the conventional lining for water conveyance cannel is concrete lining. Because of advantages of concrete lining including durability (about 40 years) and low maintenance costs, this type of lining is the best option in many regions, however the construction expenses is high. So far many researches have been published about the types and the durability of concretes containing synthetic pozzolans. Due to high production of wheat in our country, nano particles of wheat ash sheath (NPWAS) were used. In this study the mechanical properties of concrete (compressive strength, tensile strength and durability) incorporating nano-particles of wheat ash sheath were investigated. The results showed that the compressive and tensile strength of samples incorporating 20 percent of NPWAS has not statistically significant difference (P<0.05) with the values of tensile and compressive strength of control samples. Therefore, the optimum replacement percentage of NPWAS was 20 percent by weight of cement. Moreover, results of durability of concrete samples showed that concrete containing 20 percent NPWAS were more durable than control samples in the magnesium sulfate solution. NPWAS with having 90.56 percent of silicon dioxide, high pozzolanic activity and ability to perform substantial chemical reaction with calcium hydroxide would decrease porosity and increase resistance of concrete.
N. Abbasi, M. Mahdieh, M. H. Davoudi,
Volume 16, Issue 62 (3-2013)
Abstract
Stabilization of the silty sand soils which cover large areas of Iran and world is inevitable as their geotechnical properties are weak. In this research, the effects of different contents of lime and pozzolan admixtures on compressive strength of silty sand soil were investigated. To do this, different treatments were prepared by adding five levels of lime including 0, 1, 3, 5 and 7 percent by weight of silty sand soil, and four levels of pozzolan including 0, 5, 10, and 15 percent. Then, different specimens with 3 replications were remolded and cured for 7, 14 and 28 days and tested for determination of their unconfined compressive strength. Statistical analysis was made using SPSS software and the results showed that addition of lime and pozzolan increases optimum moisture content and decreases maximum dry density of the soil. Moreover, it was found that the addition of lime and pozzolan to the soil increases compressive strength considerably Compared with when applied individually. In this way, the compressive strength of the samples can be increased up to 16 times more than the natural soil strength. Based on the overall results of laboratory tests and statistical analysis, the combination of 3 percent lime and 15 percent pozzolan was determined as the optimum mixture for stabilization of silty sand soils
J. Abedi Koupai, K. Norouzian, N. Abbasi,
Volume 19, Issue 73 (11-2015)
Abstract
To improve the engineering properties of fine-grained soils, the use of various additives has always been considered important. In this study, the effect of hydrated lime on compressive strength of clay soils was studied in both optimum moisture and saturated modes. For this purpose, by adding varying amounts of hydrated lime (0, 1, 3and 5%) to the clay, several samples were prepared and tested by the standard proctor and Harvard miniature compaction apparatus. Then the samples were tested for unconfined compressive strength in optimum moisture and saturated modes after different curing days (7, 14, 28 and 90 days). The results showed that by increasing the amount of hydrated lime, the maximum dry unit weight was reduced and the optimum moisture was increased. Increasing the hydrated lime also increased the compressive strength of the soil in both dry and saturated modes and this resistance increase was significantly influenced by cured days and the amounts of hydrated lime. The results showed that the rate of 5% hydrated lime was the maximum compressive strength, but with regard to softening factor, the amount of 3% hydrated lime was determined as the optimum value.
M. Mir Mohammad Sadeghi, A. R. Sotoudehfar, E. Mokhtari,
Volume 20, Issue 77 (11-2016)
Abstract
Improvement of soils is among the major concerns in civil engineering, therefore a variety of approaches have been employed for different soil types. The annual budget of implementing the projects of this kind in countries clearly implies the importance of the subject. The loose granular soils and sediments have always imposed challenges due to their low strength and bearing capacity. Bio-mediated soil improvement has recently been introduced as a novel link of biotechnology (biotech) and civil engineering for improving the problematic soils, i.e. utilizing some bacteria to precipitate calcite on the soil particles. Bio-grouting is a branch of Bio-mediated soil improvement which is a method based on microbial calcium carbonate precipitation. In this regard, the soil samples were stabilized by injecting the bacterium Sporosarcina pasteurii in the first phase of the process and Urea and Calcium Chloride in the second phase of the process (two-phase injection) as the nutrients into the sandy soil columns and subjected to unconfined compressive strength test. In this research, Taguchi method was utilized for design of experience (DOE). Based on results obtained, the activity of the bacteria caused the precipitation of calcium carbonate in soil samples so that after 21 days, the unconfined compressive strength of the soil increased from 85 kPa in the control sample to 930 kPa at optimum condition.
N. Abbasi, A. Heydari Pakroo, R. Bahramloo,
Volume 24, Issue 2 (7-2020)
Abstract
The use of additives to modify the physical, chemical and mechanical properties of soil and soil stabilization is one of the most common methods that have a history. By adding one or more additives to the soil and carrying out the required measures, the engineering properties of soils could be improved due to chemical reactions. Selecting the type and amount of additive depends on several factors such as: soil type, stabilization purpose, additives inherent characteristics, etc.; these are determined based on the technical and economic aspects of the projects. In this study, the effects of the simultaneous use of three types of additives including lime, stone powder and polypropylene fibers on the unconfined compressive strength of a clayey soil were investigated. To do this, four different levels of lime (0, 2, 3 and 5 percent by weight of soil) and four different levels of stone powder waste (0, 2, 5 and 10 percent by weight of soil) and Polypropylene fibers with different percentages in five levels of 0, 0.25, 0.5 and 1 percent by weight of soil were added into a high plastic clay soil classified as CH. Then, some physical and mechanical characteristics of different mixtures including plasticity, compaction and unconfined compressive strength were determined. The results showed that the samples were stabilized with lime and stone powder waste and reinforcement them with polypropylene fibers modified Atterberg Limits, optimum moisture and maximum dry density of the mixtures. Also, it was found that a combination of waste stone powder, lime and polypropylene fibers containing 5, 5 and 1 percent by weight of soil increased the unconfined compressive strength 8-fold, as compared to the natural soil. The curing time also had a significant impact on the compressive strength of the treated samples in which the 28-day compressive strength of was found to be about 2 times of the 7-day samples.
H. Daghigh, H. Mousavi Jahromi, A. Khosrojerdi, H. Hassanpour Darvishi,
Volume 26, Issue 3 (12-2022)
Abstract
The existence of silty sand in the infrastructure under concrete constructions, hydraulic structures, and irrigation systems has always caused challenges. Improving this kind of soil is always a challenging approach to increase compressive strength and shear stress. There is a conception that adding some extra material such as concrete can increase the stability of this soil against contributed forces. The present study investigated the effects of curing time (3, 7, 14, 21, and 28 days) and different percentages of various additives (3%, 5%, and 7%) on the strength of the silty sand soils. A series of laboratory tests were carried out to measure the Uniaxial Compressive Strength (UCS) and California Bearing Ratio (CBR) by evaluating the effect of additives on the strength parameters of silty sand soil. In total, 299 experimental tests have been conducted in the soil mechanics laboratory of SRBIAU. Results indicated that adding additives such as concrete to silty sand soil improved significantly the compressive strength and shear strength. The comparisons among the experimental test illustrate that due to increasing the curing time, the aforementioned parameters were increased significantly; however, Confix and Bentonite aggregates did not have a marginal effect on the compressive strength and shear strength. Also, after the 21st day of the curing time, the rate of increment of the UCS and CBR reached slightly and then attained a constant value. Also, after this duration, the curing time is an independent factor in the variation of the UCS and CBR tests. Furthermore, the addition of 5% Pozzolana cement and 7% Portland cement with 28 days of curing had the highest CBR number and UCS resistance of 176.26 and 17.58 kg/cm2, respectively. Also, the sketch of the different failure patterns was shown during the curing time. Finally, by increasing the curing time, the behavior of specimens from semi-brittle to brittle made them harder.
Z. Feizi, A. Ranjbar Fordoee, A.r. Shakeri,
Volume 27, Issue 2 (9-2023)
Abstract
Maintaining soil structure and stability is essential, especially in arid and semi-arid regions with poor soil structural stability. Destruction of soil and its crust can cause wind erosion and desertification. The objective of this study was to investigate the effect of using hydrogel nanocomposite mulch on the stabilization of sand surfaces. A wind tunnel test was used to evaluate the erodibility of samples treated with different amounts of hydrogel nanocomposite. The compressive strength of the samples was measured by a manual penetrometer. The prepared nanocomposites were examined using scanning electron microscopy (FE-SEM), infrared spectroscopy (FTIR), and X-ray diffraction (XRD) images. The results of the wind tunnel showed that the addition of hydrogel nanocomposite to the samples improved the soil erosion rate by 100% at a speed of 15 m/s compared to the control sample. Bonding between sand particles by spraying hydrogel nanocomposites improves the erodibility of sand. Measurement of mechanical strength of treated samples after 30 days showed that the resistance of the crust increased with increasing the amount of nanocellulose in the composite, which can be expressed due to the increased surface area of the nanoparticle and the possibility of further bonding of the nanocomposite polymer bed with sand particles. While the crust diameter showed no significant difference with increasing concentration and the sample treated with nanocomposites containing 3% nanoparticles was thicker compared to other samples.
