Showing 8 results for Dryland
A. A. Azizi Zehan, A. A. Kamgar-Haghighi, A. R. Sepaskhah,
Volume 10, Issue 1 (4-2006)
Abstract
Iran with a cultivation area of 45000 ha and production of 150 ton/year is the number one saffron producer in the world. Planting of large size corms will increase flowering, but production of corms (number and size) may be affected by irrigation method or frequency. In this research which is performed in the farm of College of Agriculture, Shiraz University, the effects of method and frequency of irrigation on corm production, and the effect of produced corms on flowering were evaluated in two consecutive years. Two irrigation methods (basin and furrow) with four levels of irrigation frequencies (12, 24 and 36 days and dryland farming) were applied. In August of 2000 sample corm was taken from every plot, and the effect of applied treatment from previous growing period on corm production and the effect of produced corms on future flowering were evaluated and analyzed. Based on the results, in furrow irrigation, total number of corms and total number of corms smaller than 4 gr is significantly higher than basin irrigation. In all of the above cases, irrigation frequencies did not show a meaningful difference between themselves or in comparison with dryland farming treatment. Total weight of corms and number and weight of corms larger than 8 gr in basin irrigation were more than furrow irrigation. This is to the extent that it is considered as the main reason for the difference in the flowering of corms, and has caused the flowering of basin irrigation to be significantly higher than furrow irrigation. In basin irrigation, irrigation frequencies of 12 and 24 days had the highest amount of flowering. No significant difference was observed on average corm production between the treatments in the two irrigation methods. However, irrigation treatments in both irrigation methods showed significant differences when compared with dryland farming treatment. So, basin irrigation with irrigation frequency of 24 days is preferred over furrow irrigation due to lower water consumption and production of larger size corms which is effective in flowering.
A. Abdulahi, R. Mohammadi,
Volume 11, Issue 42 (1-2008)
Abstract
The response of bread wheat genotypes to weed interference was evaluated under dryland conditions. An experiment was conducted with 26 genotypes of bread wheat and two known cultivars, Sardari and Azar2, as checks in a strip plot (Split block) arrangement based on Randomized Complete Block Design (RCBD) with four replications in 2002-03 at Dryland Agricultural Research Institute, Srarood, Kermanshah. Weed-free and weedyconditions were assigned to horizontal factor with genotypes as vertical factor. Plant height, number of seeds per spike, number of spikes per square meter, grain yield, weed density and dry matter, and indices of Weed Interference Tolelance Index (WITI) and Competition Index (CI) were recorded. Mean comparison showed that genotypes 13, 1, 26 and 8 had higher grain yield than those of checks under both weed-free and weedy conditions. These genotypes also had higher WITI in comparison with the checks. According to CI values, genotypes No. 1, 9, 13, 26 and 27 including checks had a high potential of weed competition. Results of stepwise regression analysis based on WITI as the dependent variable indicated that the number of spike, plant height and number of seed per spike had positive and significant effects on WITI. On the wole, considering WITI and grain yield as two main attributes, genotypes 13, 26, 1 and 8 were selected as appropriate since they showed a high weed competitive ability and also produced higher grain yields under both weedy and weed-free conditions.
M.r. Tadayon, Y. Emam,
Volume 11, Issue 42 (1-2008)
Abstract
Photosynthesis and wheat grain yield responses to supplemental irrigation with different amount of applied water under dryland conditions were investigated. Therefore, a two-year field experiment was conducted research farm of College of Agriculture, Shiraz University during 2004-2005. Five levels of irrigation including dryland conditions, irrigation at stem elongation, booting, flowering and grain filling were main plots and two wheat cultivars: Agosta and Fin-15 were subplots, and three rates of nitrogen including zero, 40 and 80 kgha-1 were sub sub-plots. The results showed that in both years, photosynthetic rate, stomatal conductance, substomatal CO2 concentration and transpiration rate, were significantly higher under irrigation at stem elongation stage compared to other supplemental irrigation treatments. In all of the four supplemental irrigation treatments, photosynthetic rate, stomatal conductance, substomatal CO2 concentration and transpiration rate decreased with decreasing the amount of applied water to each plot. In both years, the highest grain yield was obtained from supplemental irrigation at stem elongation stage, and the lowest yield was harvested at dryland conditions. The highest photosynthetic parameters, yield and yield components were obtained from interaction of supplemental irrigation at stem elongation stage × Fin-15 and 80 kg N ha-1 in both years. The supplemental irrigation in 2004 and 2005 increased the grain yield 200 and 221 percent, respectively, compared to dryland conditions. Thus, supplemental irrigation at sensitive stem elongation stage could affect significantly wheat grain yield of rainfed wheat cultivars and provision of adequate water for a supplemental irrigation at the appropriate growth stage could double the grain yield of rainfed wheat.
S. Fallah,
Volume 12, Issue 45 (10-2008)
Abstract
To study the effects of planting date and density on yield and its components in chickpea (Cicer arietinum L.) genotypes under dryland conditions of Khorram-Abad, an experiment was conducted during 2005-2006 growing season at the Agricultural Research Station of Lorestan Weather Department. Three sowing dates (March 6, March 21, and April 5) and two chickpea genotypes (Greet and Flip 93-93) with four plant densities (18, 24, 30 and 36 plants m-2 ) were evaluated using a randomized complete block design with split-factorial design in three replications. Dates of planting were considered as the main plots, genotypes and plant densities were randomly distributed in sub-plots with factorial arrangement. The result showed that delay in planting from March 6 to April 5 significantly reduced number of pods per plant, number of grains per pod, 100-grain weight, grain yield and dry matter. Increasing plant density led to a significant decrease in number of pods per plant, number of grains per pod and 100-grain weight. However, grain yield and dry matter increased firstly with increasing plant density and then decreased. Planting date and density had no significant effect on harvest index, while genotype of Greet produced a larger number of pods per plant, grain yield as well as final dry matter. Also Flip93-93 produced a bigger number of grains per pod, greater grain weight and harvest index. The maximum grain yield was obtained with genotype of Greet at the first planting date in 30 plants m-2 density. It could be concluded that due to thermal and drought stress occurring in late spring,, early planting of Greet genotype at 24-30 plants/m2 may lead to a suitable increase in grain yield.
S. A. Kazemeini, H. Ghadiri, N. Karimian, A. A. Kamgar Haghighi, M. Kheradnam,
Volume 12, Issue 45 (10-2008)
Abstract
In order to evaluate the interaction effects of nitrogen and organic matter on growth and yield of dryland wheat, an experiment was conducted at the research station of the College of Agriculture, Shiraz University at Bajgah in 2005 and 2006. The experimental design was split plot in which three levels of nitrogen (0, 40, and 80 kg N ha -1) were main factors and additive organic matters including liquorice root residue at 15 and 30 Mg ha -1, municipal waste compost at 10 and 20 Mg ha -1, and wheat residues at 750 and 1500 kg ha -1 (all rates equivalent to 50 and 100%) were sub factors. A check treatment (no additive materials) was also included in the experiment. Results indicated that with increasing nitrogen level from zero to 40 and 40 to 80 kg ha-1, wheat yield increased significantly. Among yield components, number of seeds per spike increased significantly with zero to 40 and 40 to 80 kg nitrogen ha-1, but number of spikes m-2 increased significantly only when nitrogen level was increased from zero to 80 kg ha-1. Compared to check (no additive materials), maximum wheat grain yield (32%) was obtained from 100% compost application. Results of nitrogen and organic matters interaction effects indicated that 100% compost application and increasing nitrogen level from 40 to 80 kg ha -1 had no significant effect on dryland wheat yield. This showed the positive impact of compost application on the reduction of nitrogen fertilizer. Thus, it appears that 50% of the required nitrogen fertilizer could be replaced by compost. Applying organic matter increased soil water in both years, however, among organic matters, compost had a more pronounced effect on increasing soil water.
M. Mansourzadeh, F. Raiesi,
Volume 16, Issue 59 (4-2012)
Abstract
The application of herbicides as organic chemical compounds to control pest and weeds may affect the population and activity of microorganisms, and this may have an influence on biochemical processes that are important for soil fertility and plant growth. The primary objective of this study was to evaluate different loading rates of eradican (EPTC) on soil microbial biomass C and N, microbial biomass C/N ratio and the activities of urease and arylsulphatase under field conditions. In this experiment, loading rates of 6 and 9 L ha-1 eradican were applied to a calcareous soil cultivated with corn (Zea mays L.) and left uncultivated using split-plots arranged in a completely randomized block design with three replications. The experiment was conducted in the Kabootarabad’s Agricultural Research Center, Isfahan. Soil microbial biomass C and N were determined at 30th and 90th days after the onset of experiment and the activities of urease and arylsulphatase were assayed at 30th, 60th and 90th days. Results showed that in soils cultivated with corn microbial biomass C increased with increasing eradican levels and in both cultivated and uncultivated soils microbial biomass N and microbial biomass C/N ratios were increased over the control. At 30th day, urease activity at 6 L ha-1 level reduced, while at 9 L ha-1 level it increased compared with the control soils. At 60 day, there was no significant difference in the urease activity between the treatments. At 90th day, the activity of urease showed slight fluctuations. There was a reduction in arylsulphatase activity of the cultivated soils by increasing the loading rates of eradican during the experiment, and in uncultivated soils no trend was observed. Briefly, the use of eradican can cause either reduced or increased microbial biomass sizes and enzyme activities in calcareous soils These changes, however, depend largely upon the application rate of eradican, time elapsed since eradican application (i.e., sampling date) and the presence or absence of plant
J. Asghari Meidani, E. Karimi, S. B. Mousavi,
Volume 16, Issue 60 (7-2012)
Abstract
This study was conducted to study and compare the effects of different tillage systems on soil physical properties and wheat yield in dryland conditions. The experiment was carried out in Maragheh Dryland Research Station with 5 treatments and 4 replications based on RCBD for 3 years (2001-2003). The results showed that difference between the treatments in terms of wheat yield was significant, and stubble chopping and chisel plow tillage in fall + sweep in spring + seed drill planting had the maximum yield (i.e. 1452 kg/ha), lower value for yield (1.077kg/ha) blonged to T1 treatment. Also the results showed that spike/plant and spike length were the main characters in yield increase. For the soil bulk density and water content, the difference between treatments was significant and in planting and flowering stages stubble chopping and chisel plow in fall + sweep in spring + planting by seed drill had the highest soil water content and the lowest bulk density
A. M. Ghaeminia, M. A. Hakimzadeh, R. Taghizadeh-Mehrjardi, F. Dehghani,
Volume 23, Issue 4 (2-2020)
Abstract
One of the reasons for soil salinization is the accumulation of salts in it by transmission through water and wind. In order to investigate the phenomenon of transfer of salts with dust in the arid regions of the north of Yazd- Ardakan plain, field samples were taken using 32 MDCO sediments traps with uniform dispersion in an area of 20,000 hectares at some stage in 4 seasons of 2017. After washing the sediment collector with a liter of distilled water in the field and transferring the samples to the laboratory, for the quantitative analysis of saline dust, similar to measuring the Water Electrical Conductivity (ECw), the Total Soluble Solids (TDS) were additionally measured through evaporation technique. The form and distribution of the dust particle size were additionally investigated using a Scanning Electron Microscope (SEM) tool. Within the qualitative examine of salts, effective cations and anions in salinity including Na+, K+, Ca++, Mg++, C1-, HCO-3 and SO-4 were measured The results confirmed that, in general, the fallout was 11.1 g.m-2 of soluble material with dust particles (13.28%) in the course of only 12 months. Particles with a diameter of 5 to 10 microns were the most frequent. Considering the high correlation between C1- and Na+ in the spring, autumn and winter, due to the high correlation between Ca++ and SO-4 in summer dust, sodium chloride (NaCl) and gypsum (CaSO4) 2H2O)), the most abundant composition of dust- containing salts could be expected in these seasons. By determining the percentage of solutes in the fallout dust, it was observed that the impact of the amount of the deposited salt from dust was slight and insignificant in the short time period; with the assumption of no change in the rate of subsidence, it was anticipated that it would explain the poor salinity in non- saline mass soils for up to 10 cm in 72 years. In general, the capability of airborne salt in increasing the soil salinity in the study area can be in long- term periods. Therefore, it is recommended to investigate other environmental effects of this phenomenon in order to identify its hazards.
