Showing 35 results for Dust
M. Ahmadpour Borazjani, G.r. Soltani,
Volume 4, Issue 2 (7-2000)
Abstract
Marine products are currently important in Iran due to the following reasons: 1) aquatics are recognized as safe and healthy food by food scientists 2) because of low dependence of fishing technology on foreign resources, they are more reliable sources for protein and food security. Therefore, it is important to increase labor productivity using advanced fishing technology under a sustainable fishery management policy. In general, the prevailing methods of fishing in the southern coasts of Iran can be classified into three groups based on the level of technology and the length of journey made: traditional, semi-industrial, and industrial. In this study, labor productivity in the traditional and semi-industrial groups were compared using data obtained from a sample of 35 fishermen in Bushehr Province. To determine the marginal and average labor productivities, transcendental production functions were estimated for fish and shrimp, separately. The findings indicated that the marginal and average productivities of labor in semi-industrial fishing were significantly higher than in traditional fishing.
M. N. Gholami-Rouchi, J. M. Sadeghi, A. Dehghani,
Volume 9, Issue 1 (4-2005)
Abstract
This research was conducted to measure the total factor productivity (TFP) of the rural small industries in Isfahan province comprising six types of industries: food, textile, metal, non-metal mineral, chemical, and cellulose. Among the 166 rural small industries sponsored by Jihad-Agriculture Organization of Isfahan in 2001(1380), 60 plants were selected. Cross-section information collected from the 60 plants by a questionnaire in that year confirmed the body of data for this study. The distribution of the types of the 60 selected plants followed the distribution of the types in the plant population. The analytical part of this research consisted of two sections. In the first section, the TFP of the rural small industries was established by applying Cobb-Douglas production function in which the value of the plant production was the dependent variable and the investment costs, total hours of labor, costs of raw materials, and the costs of energy and water were the independent variables. Factors affecting TFP were analyzed in the second section. The estimated coefficients of the first section and the actual data of the variables, were used to calculate the TFP for each plant. Then, another regression model was worked out in which the calculated TFPs were the dependent variable. The independent variables included the mean of the number of the employees' children, the percentage of the production employees with at least primary school level of education, annual number of the off days, dummy variable for the members of the cooperative association, and a few other variables.
The results of the first section showed that the TFP of food industries was higher than that of other types of industries and there was no significant difference between the TFP of textile, metal, non metal mineral, chemical and cellulose industries. The results of the analysis for determining the factors affecting the TFP, showed that the existence of a research section in the plant, the insurance of the employees and the mean of the number of employees' children had a positive effect on the TFP. But, the level of the education of the production workers, the area of the plant buildings, and the number of the days off in plant had negative effects.
A. Shooshtarian, M. Bakhshoodeh,
Volume 9, Issue 2 (7-2005)
Abstract
This paper attempts to introduce two indices for measuring the level of Intra-industry Trade (IIT) between Iran and the members of the European Economic Community (EEC) according to five agricultural product groups. For this purpose, the indices suggested by Grubel-Lioyd and Aquino, were employed and explained how these indices obtained. The required data and information were collected from the year books and the internet site of “Iran Trade Point”.
In general, the measured indices indicated a low level of trade between Iran and the members of EEC. In three groups, export value was higher than import value. On the contrary, for the two another groups of cereals and flowers, the import values were higher in most years. But in general, there wasn't seen any certain trend in indices values. In addition, many uses of these two indices also explained. Because Intra-Industry Trade is a new subject, further study and research seems to contribute to the economic communities specially in Iran.
M. Borji,
Volume 10, Issue 2 (7-2006)
Abstract
Recently, the use of microorganisms for conversion of plant biomass into many commercially valuable products has been studied. In this study, some soil samples, composting plant materials, and composted manure from different parts of Markazy province were collected to isolate and identify aerobic bacteria, which have been capable of utilizing lignin preparations as a sole source of carbon. Bacteria were isolated by using three types of lignin preparations and hot- water- extracted wheat stover and saw dusts. Two of the isolates, identified as Streptomyces sp. and Pseudomonades sp. were able to degrade wheat stover and saw dust lignin and polysaccharides. The growth rate of Streptomyces sp. and Pseudomonades sp. was higher in wheat stover fed cultures than the saw dust fed cultures. Results also showed that bacteria treatment of lignocelluloses and nitrogen supplementation of culture media had considerable effects on chemical composition of wheat stover and saw dust. All two bacteria genera increased crude protein, APPL, soluble lignin, and decreased carbohydrates and insoluble lignin of wheat stover and saw dust (P<0.01). Streptomyces showed more degradation ability than Pseudomonades, especially in culture media containing wheat stover. The utilization of yeast extract (as nitrogen source) improved degradation abilities of bacteria. The findings of this study indicate that these bacteria could be used for biological upgrading of agriculture residues in order to feed animals.
M. A. Nazari, H. Shariatmadari, M. Afyuni, M. Mobli, Sh. Rahili,
Volume 10, Issue 3 (10-2006)
Abstract
Sewage sludge and effluents, as cheap sources of irrigation water and fertilizer, can supply plants with water and nutrients however, contamination of these sources with heavy metals and the possibility of human food chain contamination using these sources should be considered. In this research, the effects of industrial sewage sludge and effluents on concentration of some nurtients, heavy metals and sodium and dry matter yield of wheat (Triticum aestivum), barley (Hordeum vulgare) and corn (Zea mays) were investigated. The experiment was carried out in a greenhouse using a complete randomized design with four replication. The treatments comprised well water, well water + sewage sludge(50 tons/ha), and three industrial effluents from Iran Polyacryl factory including the cooling tower, the over flow and the factory outlet effluents. Chemical analysis showed the following results: The concentration of the elements in the sludge and the effluents were below the critical contaminating levels. The application of the treatments did not supply enough nitrogen for corn the cooling tower effluent could not supply enough nitrogen for wheat and barley all the treatments supplied enough P for wheat. None of the treatments could supply enough P for corn. The cooling tower, over flow and the factory outlet effluents could not supply enough P for barley, the micronutrient and heavy metal concentrations in the plant tissues using the effluents and the sewage sludge were higher than those for well water the dry matter yield of plants’roots and shoots was highest using well water + sludge and in comparison with the well water, effluents could increase the shoot dry matter yield.
M Lotfalian, B Majnonian, M Rezvanfar, A Parsakho,
Volume 12, Issue 46 (1-2009)
Abstract
In this research, the logging and wood extraction damages caused by wood and paper companies was investigated. The average volume per hectare of compartments 17 and 28 of Waston watershed and Compartment 7 of Alandan watershed was more than 150 cubic meters. So, these compartments were selected as the suitable research sites. The systematic randomized sampling method with 1000 m2 circular plots was used to assess the damages to residual stands and 100 m2 circular plots was used to assess the damages to regeneration. Sampling in skid trail was done with one hundred percent inventory method with a width of 12 meter. Results of this study indicated that 3.2 percent of regeneration was damaged in felling and bucking operations and 4.8 percent of regeneration was also damaged after winching and skidding operations. Most of these damages occurred for thicket stage. The felling and bucking operations damaged 13.6 percent of the residual stand. The amount of damage to the stand after skidding including the whole logging damages equals 15.5 percent. Unnecessary damages to stand and regeneration could have been avoided by selecting the best harvesting method, skidding practices, adequate incentives/disincentives and appropriate supervision.
A.h Khoshgoftarmanesh , A Sanaei Ostovar ,
Volume 13, Issue 50 (1-2010)
Abstract
The objective of this study was to evaluate the possibility of using treated industrial by-products as a zinc (Zn) source and compare their Zn availability and efficiency to ZnSO4. A greenhouse factorial experiment in a completely randomized block design was conducted with corn (Zea mays L.) in triplicates. Treatments included three Zn sources (ZnSO4, IUT-UT in size of < 1 mm and IUT-UT in size of 2-3 mm) at three rates (0, 20 and 40 kg ha-1). The results showed that Zn application both in the form of ZnSO4 and treated industrial by-products significantly (P < 0.05) increased the growth and shoot dry matter yield of corn. Shoot dry matter weight of corn in pots that had received IUTUT was higher compared to those that had received ZnSO4. The highest shoot dry matter weight was produced at the IUT-UT treatment in size of < 1 mm. Increased fertilizer rate significantly (P < 0.05) enhanced shoot and root Zn concentration. However, this increase was higher in ZnSO4 treatment as compared to the IUT-UT treatments. Application of the IUT-UT caused a significant increase in shoot Fe concentration of corn. Shoot and root Cd concentration in all experimental treatments was less than 0.02 mg kg-1. The results showed that IUT-UT can be used as a slow-release Zn fertilizer with low impurity.
Z. Mahmoodi, H. Khademi ,
Volume 18, Issue 67 (6-2014)
Abstract
Atmospheric dust is an important source of heavy metals, particularly in urban environments. Heavy metals can easily attach to dust particles and be distributed in large areas. The objective of this study was to evaluate the status of major heavy metals in the atmospheric dust of Isfahan and adjacent cities. A total of 144 dust samples were taken during a period from August to December 2010 from Isfahan, Khomeynishahr, Falavarjan, Mobarake and Zarinshahr cities. Dust samples were extracted with HNO3 65% and the total concentration of metals including Pb, Zn, Cd, Cu, Ni, Co, Cr and Mn in the samples was measured by an atomic absorption spectrometer. The mean concentration of these metals was 223.5, 470.3, 3.5, 71.0, 82.0, 26.5, 24.4 and 426.3 mg kg-1, respectively. Results indicated that heavy metals concentration in any area was different depending on the source of pollution and it was much higher than the mean concentration of the corresponding heavy metal in soils. Besides, the highest deposition rate of all the heavy metals in this study was found in November-December period. This could be attributed to an increase in the use of heating systems and also to a temperature inversion event prevailed in the area. Atmospheric deposition seems to be an important pathway of heavy metals addition to soils. For example, it is responsible for 35-91% and 12-47% of Pb and Cd entering the soil in the area, respectively.
F. Jafari, H. Khademi,
Volume 18, Issue 70 (3-2015)
Abstract
Dust deposition occurs extensively in arid and semiarid regions of the world. Since dust particles are fine-sized, they have a high adsorption capacity and also high contamination potential. The objective of this study was to evaluate the temporal and spatial distribution of the rate of atmospheric dust deposition in different locations in Kerman urban area. Dust samples were collected monthly using glass traps installed on the roof of 35 one-story buildings in Kerman for 7 months from April 20 to Nov. 20, 2012 (a total of 245 samples). After each monthly sampling, traps were washed and dust samples transferred to the laboratory and weighed. The mean dust deposition rate of 7 months was mapped using the inverse distance weighting (IDW) approach. The wind rose of Kerman was drawn by WRPLOT 7.0.0. The results showed that the average rate of dust deposition decreased during the 7 months studied from 17.4 to 5 g/m2. month, which could be attributed to the decrease in wind velocity. The spatial distribution of the samples also showed that the dust deposition rate varied from 4.84 in the southern parts to 14.84 g/m2.month, mostly in the northern locations of the city. The wind rose based on the average wind speed of the 7 months of sampling indicated the prevailing wind blows from north, northeast and northwest and the dust spatial distribution well follows the wind direction. In general, the rate of dust deposition in Kerman city is high and therefore, the source of dust has to be well detected and proper management practices are necessary.
S. Mehrabi, S. Soltani, R. Jafari,
Volume 19, Issue 71 (6-2015)
Abstract
Since climate has a major impact on dust generation, it is essential to identify the climatic parameters affecting this phenomenon. In this study, climatic parameters including temperature, relative humidity, rainfall, maximum wind speed and direction were selected and their relationship with visibility data and also dust storm days (recorded at meteorological stations) was analyzed on monthly and yearly scales using multivariable linear regression. Results showed that the number of dust storm days has reached 366 days in the last five years. The minimum dust storm days occurred in autumn in all the stations of Khuzestan province including Abadan, Ahvaz, Omidiyeh, Dezful, and Masjed Soleiman and the maximum dust days for Abadan and Ahvaz stations and three remaining stations occurred in spring and summer, respectively. Results also showed that the highest frequency of dust storms in Abadan and Ahvaz stations did not coincide with summer season which has the lowest rainfall of the year. As a result, it seems that the main reason for this difference is the climatic characteristics of dust sources and deposition regions. The occurrence of dust events in the remaining stations in summer time indicated that the sources of dust storms might be local and within the study area. The regression analysis confirmed this issue as the number of climatic parameters which had significant correlations with visibility data increased from 8 to 16 from west to east in the region. Overall, the results showed that with the increasing distance from Arab countries such as Iraq and Saudi Arabia, dust sources were mostly local and provincial.
S. Abdoli, B. Khalili Moghadam, M. Rahnama,
Volume 19, Issue 71 (6-2015)
Abstract
Quantitative measurement of aeolian dust may help properly monitor and control the wind erosion. The aim of this study was to evaluate the efficiencies of four aeolian dust samplers including the modified Wilson and Cooke sampler (MWAC), cyclone dust sampler with cone (CDSC), cyclone dust sampler (CDS), and marble dust collector (MDCO) in comparison with the big spring number eight sampler (BSNE) in different velocity rates and particles sizes. For this purpose, MWAC, MDCO, BSNE were simulated and CDSC and CDS were designed and constructed. The relative efficiencies of the CDSC, CDS, MWAC, and MDCO were evaluated for the 80, 137, 260 micron diameter particle sizes (D50) in 2-7 ms-1 velocity by wind tunnel. The results showed that relative efficiency of CDSC is higher than CDS, MWAC, and MDCO as a consequence of the wind speed. CDSC and CDS relative efficiencies varied in relation to wind velocity, but MWAC, MDCO relative efficiencies remained constant. Also, CDSC, CDS, MWAC, MDCO relative efficiencies varied from 0.8, 0.48, 2.18, 0.58 times by increasing the particle size diameters from 80 to 260 micrometers, respectively.
A. Jafarishalkoohy, M. Vafaeian, M. A. Rowshanzamir, M. Mirmohammadsadeghi3,
Volume 19, Issue 73 (11-2015)
Abstract
A laboratory research program was arranged to study the effect of different factors influencing the stability of fine soils against wind action. For this purpose, a laboratory wind tunnel was stabilized and several soil samples were examined by putting the sample trays inside the wind tunnel for different rates of wind velocities. The tray for soil samples was 20´30 cm2 with the depth of 5 cm, and the fine soil samples were chosen with different sizes of particle and porosity. Because the main aim of this research was to investigate the effect of some polymer additives to the soil, many samples were made of the soils improved by different additives in different percentages. Furthermore, the effect of infiltration of the liquid additives was also examined, which could show different infiltration heights as functions of soil type, additive type and the height of pouring. Some of the results were examined by using software. The lab results in this research were compared with some proposed theoretical ones. It was found that as the average diameter of particles increases, erodibility under the same wind velocity decreases, and the applied polymer emulsions decrease the erodibility up to 90% compared to the initial condition. Impacts of dust emission due to the suspended dispersion of fine particles and creeping movements of coarse particles are mitigated as a result of treatment with these emulsions. Variations in erosion of soils at various wind velocities depend on the value of threshold friction velocity with the result that the soil erosion values in case of coarser soils after the increase in velocity would be higher than those of threshold friction velocity. Finally, a relationship is proposed for estimation of soil erosion in terms of wind velocity. The results are consistent with the transport rate relationships proposed by different scholars.
Sh. Ahmadi Doabi, M. Afyuni, H. Khademi, M. Karami,
Volume 20, Issue 76 (8-2016)
Abstract
Heavy metals in dust can directly enter to the human body through ingestion and inhalation. They can pollute the water and soil resources via atmospheric precipitation and accumulate in the plant tissues and then enter human body through water and food. This research aimed to study the heavy metals concentration in dust in Kermanshah province and to identify their sources. 49 samples of dust were collected in the cities of Kermanshah, Songhor, Gilangharb, Ghasre-Shirin, Sahneh, Sarpolzahab, Kangavar, Paveh and Javanrood during the spring 2013. The concentration of Zn, Cu, Ni, Cr, Mn and Fe were determined using an atomic absorption spectrometer following the sample extraction with a mixture of HCL and HNO3 (3:1 ratio). The average concentrations of Zn, Cu, Ni, Cr, Mn and Fe were 182.3, 48.6, 115.3, 73.9, 428.1 and 23161 mg kg-1, respectively. Correlation, cluster and principal component analyses were used to identify probable natural and anthropogenic sources of contaminants, and the enrichment factor was used to identify probable effects of human activity on the concentration of heavy metals. The results indicated that metal concentrations, except for Fe and Mn, were higher in comparison with the world soils. Zn, Cu, Ni and Cr are mainly of anthropogenic origin, while Fe and Mn are mainly of natural origin. Zn and Cu are mainly of traffic sources and partly of industrial sources, and Ni and Cr are mainly derived from industrial sources, combustion processes, combined with traffic sources. The analysis of EF revealed moderate enrichment for Mn and Cr, and significant enrichment for Zn, Cu and Ni. Based on the results of this study, more attention should be paid to identifying and controlling the sources of contaminants such as heavy metals in dust in order to prevent their associated pollution.
A. Khosravi-Dehkordi, M. Afyuni, A. Soffianian,
Volume 20, Issue 77 (11-2016)
Abstract
Pollutants are considered the disturbing factors of environment, and among them the heavy metals are more important considering their non-degradability and physiological effects on organisms in low concentrations. The goal of this research was to investigate the effect of industrial landuse on Cd and Pb concentrations in surface soils of the southwest Isfahan. According to satellite images and topographic maps (1:50000) of the study area, soil samples (depth: 0–20 cm) were collected using random sampling. A total of 38 surface soil samples were obtained from industrial areas (lowest distance = 1480 m) in the area of 73481 ha. Total concentrations of Cd and Pb in the digested solution were measured by Atomic Absorption Spectrophotometry (AAS). Using Arc GIS, the spatial distribution patterns and Cd and Pb variography of samples were analysed and finally the best models of spatial distribution of heavy metals were achieved. The primary results showed that the mean concentrations of Cd, and Pb of surface soil samples in industrial areas were 1.8 to 31.5 mg Kg-1 higher than the world’s mean values, respectively. Although the mean concentrations of Cd and Pb were respectively 8 to 700 mg Kg-1 lower than the standard of Iranian Department of Environment for industrial landuse.
F. Jafari , H. Khademi,
Volume 21, Issue 1 (6-2017)
Abstract
Dust deposition phenomenon is an important climatic and environmental issue in arid and semi-arid regions. The objective of this study was to examine important characteristics of atmospheric dust in Kerman as one of the major cities in arid areas of our country with high potential of dust production. Dust samples were collected monthly using glass traps installed on the roof of 35 one-story buildings in Kerman for 7 months from April 20 to Nov. 20, 2012. To compare the results of atmospheric dust with those of soil, 60 surface soil samples (0-10 cm) from outside Kerman and 35 soil samples from urban areas were also collected. Some physical and chemical characteristics such as pH, electrical conductivity, organic matter, calcium carbonate equivalent, and particle size distribution were determined in dust and soil samples. The results of chemical analyses indicated that the amount of these properties is much higher than that in soils. Atmosphere dust particles appear to mainly originate from alkaline and saline soils surrounding the city of Kerman. Dust particle size distribution analysis further confirmed that dust particles have been transferred to Kerman city from medium to long distance areas. Temporal variability in dust chemical properties indicates that the contribution of anthropogenic and natural sources to urban dust in Kerman has seasonal changes. Based on the results obtained, it is necessary to control dust production outside and inside the city and its distribution in populated areas employing proper management practices.
A. Vali, F. Roustaei,
Volume 21, Issue 4 (2-2018)
Abstract
Wind erosion is the most important geomorphic process and the main cause of the landscape change in arid and semi-arid areas. This paper focuses on the Dust Storm Index (DSI) with the aim of monitoring wind erosion in Central Iran using meteorology data. The trend of standardized DSI and its three factors which are sever dust storm, moderate dust storm and local dust events were studied using Man-Kendal non-parametric test. It was found that wind erosion is accelerating in recent years. Compared to primary 20 years (1965-1985) DSI rate has been three times more than 30 years ago (1985-2014). The central and southern parts of Central Iran show the highest severity of wind erosion and the severity of DSI decreases by approaching the north. Therefore, considering the sensitivity of these areas, in addition to taking into account prevention programs, they should also be considered in regeneration and control programs.
E. Chavoshi, M. Afyuni, M. A. Hajabbasi,
Volume 22, Issue 2 (9-2018)
Abstract
This study covers a large agricultural and industrial area of Isfahan province, including three types of land use, i.e., agricultural, uncultivated, industrial and urban types. A total of 275 samples from surface soil (0-20 cm) were collected and water soluble fluoride concentrations of them were measured. The spatial structure of water soluble fluoride in the soils was determined by omnidirectional variogram in the GS+ software. The spatial distribution of water soluble fluoride in the soil was mapped by employing the point kriging method in the SURFER software. The results showed that the mean of the water soluble fluoride concentration in Isfahan soils (0.85 mg L-1) was higher than the mean world soils (0.53 mg L-1). The water soluble fluoride showed moderate spatial dependence, indicating that the spatial variability of water soluble fluoride was mainly controlled by intrinsic and extrinsic factors. The mean water soluble fluoride concentration was significantly higher in agricultural and urban areas, as compared with the uncultivated land. This could be due to application of phosphate fertilizer in agricultural areas and the atmospheric fallout of fluoride from the industrial sources such as steel factories. According to the generated kriging map, the higher concentration of fluoride was mainly recorded around the Zayande Rood River and in the central and western parts of the study area.
H. Babaei, N. Ghanavati, A. Nazarpour,
Volume 22, Issue 3 (11-2018)
Abstract
Dust particles are suspended particles created from various natural and anthropogenic sources. Dust particles contain toxic metals, such as mercury (Hg), which can have harmful effects on the human health. In this study, to investigate the contamination level of Hg in the street dust in Ahvaz, 95 dust samples were collected from the pavements in the main streets. The concentration of Hg in the collected samples was determined by the atomic absorption method (ASS). The contamination level was estimated based on indicators such as contamination factor (Cf), enrichment factor (EF), geo-accumulation index (Igeo) and ecological risk index (Er). The concentration value of mercury ranged from 0.02 to 8.75 mg/kg with an average of 2.53 mg/kg. The results of pollution indicators showed that the level of Hg contamination in the street dust of Ahvaz was a high level of contamination. In addition, the results of ecological risk assessment indicated that the ecological risk of Hg in the study area was very high. Spatial distribution pattern of Hg concentration showed that in areas with high population density, high traffic volume and industrial activities, there was a high pollution level of Hg.
Miss M. Halil, N. Ghanavati, A. Nazarpour,
Volume 23, Issue 1 (6-2019)
Abstract
High concentrations of heavy metals in street dust are considered to be a serious risk to the human health and the environment. In this study, 30 dust samples were collected from the pavements in the main streets of Abadan to determine the level of pollution of heavy metals in the street dust. Heavy metal concentrations were analyzed by inductively coupled spectroscopy (ICP-OES) method. The level of heavy metals pollution was estimated based on enrichment factor, pollution index and Nemro Integrated Pollution Index. The average concentrations of heavy metals such as Pb, Zn, Cu, Cr, Cd, Ni, V, As and Co were 59.13, 287.50, 112.97, 50.03, 0.52, 56.77, 35.83, 7.10 and 7.53 mg/kg, respectively. Based on the average enrichment factor (EF), Ni, Cu and Pb had high levels of contamination and Zn contamination was high. According to the mean of pollution index (PI), heavy metals of Zn and Pb had a high contamination. According to the Nemro Integrated Pollution Index (NIPI), 96.66% of the samples had a high degree of contamination. The spatial distribution pattern of the heavy metals concentration showed that in the areas with high population densities, high traffic volumes and urban shopping centers, heavy metal pollution was severe.
S. Ghorbani, R. Moddress,
Volume 23, Issue 3 (12-2019)
Abstract
The purpose of this study was to model the relationship between the frequency of dust storms and climatic variables in desert areas of Iran. For this purpose, climatic data of temperature (maximum and minimum), rainfall, wind speed (maximum and minimum), and their relationship with the number of days with dust recorded in 25 meteorological stations (statistical period since their inception until 2014) in summer using Pearson correlation coefficient and linear regression method multivariate was analyzed in SPSS software. Also, due to regional analysis, correlation coefficient between climatic variables and frequency of drought storms in desert areas of Iran, the mapping of these coefficients was prepared by method of Inverse distance weighting (IDW) in Arc GIS software. The results showed that the stations in the south and southwest of the study area have the highest dust incidence in the summer season. So that Zabul station with (3892 days) has the most frequent occurrence of dust storms. In most stations, there was a significant relationship between the frequency of dust storms and the variables of average wind speed and maximum wind speed. The highest correlation coefficient of the mean wind speed was related to the station of the Chabahar Konarak with correlation coefficient of 0.710 and Iranshahr station with a correlation coefficient of 0.65, showed the highest correlation with maximum wind speed. The maximum temperature variable at Qom station with a correlation coefficient of 0.398 shows a significant and positive relationship. Iranshahr station has a correlation coefficient of -0.620 with a mean temperature and Minab station has a correlation coefficient of -0.446 with maximum temperature. The results of temperature correlation with the frequency of dust storms indicate that ground low pressure is effective in creating the phenomena in the warm course of the year. Most stations have inverse correlation with precipitation. The highest correlation coefficients between precipitation and dust events were observed at -0.208 and -0.185 at east of Isfahan and Torbat Heidariyeh stations, respectively. Multivariate regression modelling between dust and climatic variables in summer also shows that the most important parameter in dust events are average wind speed, maximum wind speed and average temperature. Regression models show that, at the best condition, climate variables explain only 70% of the variation of dust frequency.
