Showing 30 results for Fertilizer
Mahmoud Kalbassi, Akbar Gandomkar,
Volume 1, Issue 2 (10-1997)
Abstract
The moisture content of urban solid wastes in Iran is very high. A large volume of leachate is, therefore, produced in the process of converting these wastes into compost. The leachate contains relatively large amounts of organic matter, plant nutrients, soluble salts as well as small amounts of some heavy metals. The effects of urban solid waste leachate on growth and yield of corn and heavy metals and nutrients concentrations in plant as well as the effects of leachate residual on soil were studied in a field trial conducted in two sites (Zeinal and Lavark) in central Iran (Isfahan). The treatments included applications of 0, 400, and 800 metric tons of leachate/ha as the main plots and two leaching treatments (0 and 15 cm leaching) as the sub-plots in a split plot design. Application of the leachate decreased crust formation and greatly improved germination and growth of corn in both sites. Biological yield of corn increased from 2.4 to 4.1 and 5.3 tons/ha in Zeinal field and from 8.1 to 13.4 and 15.0 tons/ha in Lavark field for 400 and 800 tons/ha of leachate applications (as compared to the control field), respectively. Leaching increased corn yield only in Zeinal field. Uptakes of N, P, K, Fe, Mn, Zn and Cu by corn increased as a result of leachate application. Concentrations of Fe, Mn, Zn, Cu, and Cl in plant tissues also increased but no toxic symptoms were observed in plants. Concentrations of Pb, Cd, Cr, Co, and Ni in aerial tissues of corn did not increase as a result of leachate application. The residual effects of leachate application on soil were a decrease in pH and corresponding increases in organic matter content, in electrical conductivity and in available amounts of N, P, K, Fe, Mn, Zn, and Cu. It is concluded that garbage leachate has the potential to be used as an organic liquid fertilizer and soil amendment to improve soil productivity.
Masoud Ezzat-Ahmadi, Hamdollah Kazemi, Mohammad Reza Shakiba, Mostafa Valizadeh,
Volume 2, Issue 2 (7-1998)
Abstract
Effect of different times and levels of nitrogen fertilizer application on growth and grain yield of spring wheat cultivar “Ghods” was studied during 1993-1994 growing season at Karkadj, Agricultural Experiment Station, College of Agriculture, University of Tabriz, using a split plot design with three replications. Main plots were assigned to five levels of N fertilizers (0, 40, 80, 120 and 160 kg/ha) and subplots to five times of applications [all of N fertilizer at planting (T0) 1/2 at planting + 1/2 during tillering stage (T1), 1/2 at planting + 1/2 during heading stage (T2), 1/3 at planting + 1/3 during tillering and 1/3 at heading stages (T3) and 1/4 at planting + 1/4 at tillering + 1/4 at stem elongation and 1/4 at heading (T4)]. Results showed that different levels of N applications affected grain yield and biological yield significantly, while the effect of split application and also N levels × times of application interaction on these two traits were non-significant. Growth stages of wheat were not significantly affected by different N Levels and times of application. Dry matter accumulation, leaf area index, and crop growth rate, in response to growing degree days during growing season, increased when higher levels of N fertilizer were applied. Leaf area index and crop growth rate initially increased up to anthesis and then decreased. Crop growth rate decreased to zero level at soft dough stage and then became negative. Variations in relative growth rate and net assimilation rate, in relation to growing degree days, decreased when different levels of N fertilizer were applied at early part of growing season it was maximum while at later growth stages decreased and finally became negative, Times of N application and level × time interaction during growing season did not affect the growth indices significantly.
A.r. Barzegar, A. Koochekzadeh,
Volume 5, Issue 2 (7-2001)
Abstract
The main sources of cadmium in soil-plant continuum in amounts that might present a hazard are liquid and solid wastes of sewage sludge, farm manures and fertilizers. In the southwest of Iran (Khuzestan Province) over 50,000 ha of land is under sugarcane (Saccarum officinarum) cultivation and more than 80,000 ha will be under sugarcane by the end of the year 2000. In these sugarcane fields, about 400 kg ha-1 diamonium phosphate (DAP) and 400 kg ha-1 urea are applied annually. There is no data available to show the fertilizers impact on soil, water and plant contaminations in Iran with respect to cadmium. The objective of this research was to compare the extractable cadmium of virgin soils with that of soils under sugarcane.
Four sugarcane growing stations viz. Haft-tapeh, Karoon, Shoeibieh and Ghazali with cultivation histories of 36, 20, 2 and 1 year, respectively, were selected. In each site, along a transect soil samples from 0-30 cm of both furrows and ridges of cultivated soils and of virgin soils were collected. Electrical conductivity (EC), pH, clay and organic carbon contents, CI and Cd of 101 soil samples were measured according to standard methods. Results showed that increasing either EC or CI increased Cd concentration with its maximum in virgin soils and its minimum in furrows.
Results also indicated a slight decrease in the Cd content of cultivated soils.
A. Mojiri, A. Arzani,
Volume 7, Issue 2 (7-2003)
Abstract
In order to study the effects of different levels of nitrogen fertilizer and plant density on grain yield and its components in sunflower, an experiment was conducted using 'Record' cultivar at the Research Farm of College of Agriculture, Isfahan University of Technology in 1996. Four levels of nitrogen (0, 75, 150 and 225 kg/ha) and four plant densities (65000, 75000, 85000 and 95000 plants/ha) were used in a split plot arranged in a randomized complete block design with three replications. Developmental stages, plant height, stem diameter, head diameter, number of head per m2, grain yield, biological yield, harvest index, 1000-grain weight, number of grains per head, grain oil percentage, oil yield and grain protein content were measured.
The results indicated that N fertilizer caused an extension of the growth period and means of days to physiological maturity. It also increased plant height, stem diameter and head diameter. While increasing plant density had an incremental effect on plant height, it negatively affected stem diameter and head diameter. N fertilizer up to 150 kg/ha increased the grain yield and biological yield, whereas higher levels of N fertilizer decreased both. Plant density of 85000 plants per hectare was observed as a suitable plant density, whereas the higher plant density had a negative effect on grain yield. N fertilizer via increasing the number of grains per head, and plant density via increasing the number of heads per unit area and also decreasing the number of grains per head influenced the grain yield. One-thousand grain weight was not affected by neither N fertilizer nor plant density. Considering the superiority of 150 kg/ha of N fertilizer and plant density of 85000 plants/ha for grain yield and oil yield, it appears that they could be recommended for producing desirable yield in the regions similar to the study region.
A. Abbaspour, M. Kalbasi, H. Shariatmadari,
Volume 8, Issue 1 (4-2004)
Abstract
The possibility of using a steel plant by-product (converter sludge) as an iron fertilizer was investigated. This compound consists of 64% Fe oxides. Considerable amounts of elements such as Ca, Si, Mn, P, and K are also present in the sludge. To study the converter sludge, an incubation experiment was carried out on three calcareous soils. Treatments were 0, 4, and 8 percent of converter sludge mixed with soils plus mixtures of 4% converter sludge with elemental sulfur, thiobacillus inoculum and sulfuric acid. Soil samples (400 g) were kept at field capacity and room temperature in capped, aerated plastic containers for two months. Sub-samples were taken at 1, 10, 30, and 60 days of incubation and analyzed for Fe, Mn, Zn, P, and K contents as well as EC and pH.
Results showed that converter sludge increased significantly extractable Fe proportional to the rate of sludge used. Sulfuric acid application increased Fe availability significantly, but the availability of this nutrient generally decreased with the incubation time. Application of the sludge also increased the pH slightly at the beginning of incubation. Elemental sulfur and sulfuric acid application increased Fe and Mn availability significantly. Application of the sludge without and with elemental sulfur and sulfuric acid slightly increased availability of P. The results of this study revealed that converter sludge might be used as an iron fertilizer. However, further investigation in greenhouse and field experiments is needed.
A. R. Hosseinpur,
Volume 8, Issue 2 (7-2004)
Abstract
Garlic (Allium Sativum) is a major crop in Hamadan Province. However, adequete information on K status in this region is not available and no suitable extracting solution can yet be introduced. This experiment was carried out to determine the available K level in 10 soils from Hamadan region. The treatments included two K levels (0 and 200 mg K /kg soil as K2SO4) and 10 Soils in a factorial experiment in a randomized block design with three replications. The results indicated that K application increased yield, K concentration and K uptake of garlic. On the basis of K extracted, the extractants were classified in 4 groups, and the correlation between extractants in each group was significantly high. The correlation studies showed that NH4OAC, AB-DTPA and boiling 1 M HNO3 can not be used as an available K extractant. The correlation of other extractants with relative yield, plant response and additional uptake were significant. Therefore, these extracting solutions can be used as available K extractant. Potassium critical levels by extractants were also determined using Cate-Nelson method. Potassium critical levels for 90 percent relative yield were 131, 50, 46, 184, 163,203, 202, 41, 50 and 31 mg kg-1 for Mehlich 1, 0.002 M SrCl2, 0.01 M CaCl2, 0.1 M BaCl2, SrCl2 + Citric acid, Sodium acetate, 0.1 M HCl, 0.05 M HCl, 0.025 M H2SO4 and distilled water, respectively.
H. R. Ali Abbasi, M. Esfahani, B. Rabiei, M. Kavousi,
Volume 10, Issue 4 (1-2007)
Abstract
Effect of nitrogen (N) fertilizer levels and its split applications on yield and yield components of rice (Oryza sativa L.) Cv. Khazar was investigated in a completely randomized block design with 3 replications in a paddy light soil at Guilan province, Iran, 2003. In this experiment, six treatments including: T1-control (no N fertilizer) T2- 40 kg/ha N (at transplanting time) T3- 80 kg/ha N (at transplanting, and tillering times) T4- 80 kg/ha N (at transplanting, tillering, and panicle initiation times) T5- 120 kg/ha N (at transplanting, and tillering times) and T6- 120 kg/ha N (at transplanting, tillering, and panicle initiation times) were compared. Results showed that the highest fertile tiller number was obtained in the fifth and sixth treatments with double and triple split applications of 120 kg/h N (236 and 248 m-2). The highest fertile filled spikelets percentage (84.8%), 1000-grain weight (26.1 g) and grain yield (4.83 t/ha) belonged to the sixth treatment, but grain yield and 1000-grain weight were not significantly differerent in the fourth and sixth treatments with three fertilizing times. This finding may have resulted from the third topdressing application of nitrogen fertilizer in panicle initiation and higher leaf area (44.8 and 45.5 Cm2), leaf greenness (39.4 and 39.9) and leaf nitrogen concentration (31.2 and 33.6 g/kg) during grain filling in the fourth and sixth treatments. Regression analysis also showed that flag leaf greenness (SPAD values at 5 days after flowering) and flag leaf area accounted for about 75% and 78% changes in yield, respectively. In conclusion, triple split application of 80 kgN/ha could be suggested for rice Cv. Khazar in these regions since the yield would be the same as the application of 120Kg/ha N.
E. Khadivi Borujeni, F. Nourbakhsh, M. Afyuni, H. Shariatmadari,
Volume 11, Issue 1 (4-2007)
Abstract
Application of sewage sludge on the farmland as a source of crop nutrient had recently received considerable attention. Some management practices may be required to control the accumulation of toxic elements including Pb, Ni and Cd. Sequential extraction gives useful information on plant bioavailability of the elements. The objective of this study was to investigate the cumulative and residual effects of sewage sludge application on the chemical forms and mobility factor of Pb, Ni and Cd. Zero, 25, 50 and 100 Mg ha-1 of sewage sludge were applied for 1, 2 and 3 consecutive years in a split plot design, with three replications. Soil samples were taken from 0-20 cm at the end of the third year of application. Different chemical forms of Pb, Ni and Cd were measured. Results revealed that the soluble form (SOL) of Ni and Cd increased whereas Pb soluble form decreased with increasing levels and years of application. Exchangeable (EXC), carbonate (CAR) and organic (ORG) forms of the three elements increased as levels and years of application increased. Occluded (OCC) form decreased for Pb, Ni and increased for Cd. Residual form (RES) of Pb increased while that of Ni and Cd decreased. A gereral increase was observed for available (DTPA-extractable) concentration of Pb, Ni and Cd. Relative distributions of different chemical forms were in the following order: Pb: OCC > RES> ORG> CAR> EXC> SOL, Ni: RES> ORG> OCC> CAR>EXC> SOL and Cd: OCC> CAR> RES> ORG> EXC> SOL. The comparison of different forms of the metals showed the following orders: soluble Ni>Pb>Cd, exchangeable, carbonate and occluded Pb>Ni> Cd, organic and residual Ni> Pb>cd. Increasing the available (DTPA-extractable) concentration of the elements in such a calcareous soil showed that consecutive application of sewage sludge may increase the available (DTPA-extractable) concentration beyond critical levels. A significant corretation was observed between organic form and available (DTPA-extractable) concentration of the elements.
A. Karimi, M. Mazardalan, M. Homaeia, A. M. Liaghat, F. Raissi,
Volume 11, Issue 40 (7-2007)
Abstract
In Iran, fertilizers are mainly applied directly to soil. In such conditions, the yield and fertilizer use efficiency are usually low. The simultaneous application of fertilizers and irrigation water (fertigation) is an appropriate alternative to increase the efficiency of applied water and fertilizers. The objective of this study was to investigate the effect of various irrigation and fertilizer amounts on efficiency of applied fertilizers when used as fertigation in a Tape irrigation system. A field experiment was carried out with sunflower as a completely randomized design with 20 treatments and 3 replicates. The fertilizers were applied by fertigation. Four levels of the water (60, 80, 100 and 120% treatments I1 to I4) and five rates of the recommended fertilizers (0, 60, 80, 100, and 120% treatments F0 to F4) were applied.The recommended amounts consisted of 400 kg CO(NH2)2, 50 kg KCl, 30 kg FeSO4, 30 kg MnSO4, 50 kg ZnSO4, 30 kg CuSO4, and 30 kg H3BO3 per ha. Tape irrigation was used for every treatment. The results indicated that in fertigation method, there were significant differences ( P≥0.01) in fertilizer use efficiency (FUE) for the total dry matter and grain yield between treatments. The results showed that by increasing applied water, fertilizer use efficiency was increased and affected by fertilizers treatments. Thus due to higher availability of nutrients, fertilizer use efficiency increased. was Fertilizer use efficiency also decreased by increasing fertilizer rate. The results also demonstrated there were significant differences in all the treatments. The results showed that fertilizer use efficiency of K is higher than N and N is higher than P.
S. Fallah, A. Ghalavand, M. R. Khajehpour,
Volume 11, Issue 40 (7-2007)
Abstract
It is necessary to use organic fertilizers and decrease chemical fertilizers consumption to reach sustainable agriculture. Thus, to study the effects of manure incorporation methods, and integrated effects of poultry manure with chemical fertilizers on the grain yield and yield components of maize, an experiment was conducted in 2004 at the Agricultural Research Farm of Lorestan Weather Department, 30 kms northeast of Khorramabad. The treatments were arranged in a split plot layout based on randomized complete block design with four replications. The main plots consisted of incorporation of fertilizer with soil by furrower or disk. The subplots included T0: control (no consumption of fertilizer and poultry manure) T1: 200, 100, and 100 kg ha-1 of nitrogen, phosphorus, and potassium, respectively T2: 80% of T1+ 4 ton ha-1 of poultry manure T3: 60% of T1+ 8 ton ha-1 of poultry manure T4: 40% of T1+ 12 ton ha-1 of poultry manure T5: 20% of T1+ 16 ton ha-1 of poultry manure and T6: 20 ton ha-1 of poultry manure. The results showed that incorporation of fertilizer by furrower, compared with disk, led to significant increase in plant height, 1000 seed weight and grain and biological yields. However, there were not significant differences in the number of seed per ear and harvest index between the two fertilizer incorporation methods. Fertilizer treatments caused significant increase of the treats mentioned except for the harvest index. The interaction effects were not significant for any traits. T5 treatment produced the highest grain yield, and was significantly different from T0, T1, T3 and T6 treatments. The differences between T1 (chemical nutrition system) and T6 (organic nutrition system) were not significant either. Effectiveness of integrated poultry manure and chemical fertilizers on maize yield components was higher than either poultry manure or chemical fertilizer. The results of this experiment indicated that incorporation of 16 ton poultry manure + 40, 20 and 20 kg ha-1 N, P and K with furrower might be appropriate for maize prodution under conditions similar to this experiment.
Z Amiri, J Asghari, Kh Penahi Kord Aghari,
Volume 12, Issue 46 (1-2009)
Abstract
In order to determine the potato cultivars responses to irrigation regimes and fertilizer combinations, an experiment was conducted on Fereidan Research Farm, Isfahan Province in 2003. The trial was designed as split-split plot based on randomized complete block design with three replications. The cultivars (Arinda and Navita) were planted as main plots, and irrigated after 70, 140, 210 mm water evaporation from standard A pan surface that provided optimal watering, mild drought, and severe drought, respectively, as sub plots. Fertilizer combinations including of NPK + Zn, NPK+ Mn, NPK +Zn + Mn and NPK+ Manure were used as sub-sub plots. Results showed that the cultivar Arinda produced higher yield, mean tuber weight and total tuber number. By decreasing the amount of irrigation, the total yield and mean tuber weight were decreased. The highest amount of seed tubers (35-55 mm diameter) and marketable tuber sizes (diameter>35mm) and lowest amount of small size tuber numbers (diameter <35) were obtained in moderate drought. The use of NPK + Zn + Mn and NPK+ Manure produced the highest yield and mean tuber weight. Planting the cultivar Arinda with efficient irrigation is suggested in Isfahan province. Moderate drought is recommended for production of higher amount of seedy tubers. A combination of manure, Mn and Zn fertilizers are also suggested for potato farms of this district.
H Mohamad Dost Chamanabad, A Asghari,
Volume 13, Issue 47 (4-2009)
Abstract
The recent years' problems of herbicide use have led a growing number of researchers to seek alternative methods that are less reliant on herbicides. This research was conducted to determine the effect of long-term crop rotation, mineral fertilizer and herbicide on the weed infestation and grain yield of winter rye during 2004 and 2005 at the long-term experimental site of the University of Timiriazev, Moscow. Treatments were control (no weed control), herbicide, combined fertilizer (NPK) and NPK plus herbicide in field winter rye cultivated in continuous and crop rotation with other crops since 1912. Crop rotation significantly decreased weed density and dry mass. Long-term NPK application significantly decreased weed density, but had not any effect on weed dry mass. Crop rotation, NPK application and herbicide increased ground crop cover and decreased ground weed cover. In continuous crop, weed ground cover was 10 % in control plot and 3.33 % in plots where NPK was applied. Data showed that long-term crop rotation and NPK application can reduce weed infestation and increase grain yield of winter rye.
M Ahmadi, M Bahrani,
Volume 13, Issue 48 (7-2009)
Abstract
A study was conducted in 2007 to investigate the effect of nitrogen fertilizer rates (0, 30, 60 Kg ha-1) on some agronomic characteristics, seed yield and oil percentage in three Sesame(Sesamum indicum L.) cultivars (Dashtestan, Darab 14, and Zarghan) in Kaki region (Bushehr Province). The type of design was completely randomized block with factorial arrangement and three replications. Nitrogen(N) fertilizer had a very significant effect on agronomic characteristics, such as number of capsules in the main stem, number of capsules per plant, branches /plant, biological yield, seed yield ,and oil percentage, but had no effect on 1000 seed weight. There was no significant difference between the application of 30 and 60 Kg of N fertilizer ha-1 with respect to harvest index. Seed yield increased as N rate increased, but each cultivar had a different response to different rates of nitrogen. Dashtestan and Zarghan had superiority over Darab 14 with respect to overall agronomic properties such as response to fertilizer and early maturity, but from the qualitative point of view, Darab 14 produced higher percentage of oil.
H. Dehghan-Menshadi, M. A. Bahmanyar, S. Salek Gilani, A. Lakzian,
Volume 16, Issue 60 (7-2012)
Abstract
Biological indicators are considered soil quality elements, due to their dependence on soil organisms. In order to investigate The effect of compost and vermicompost enriched by chemical fertilizers and manure on soil organic carbon, microbial respiration, and enzymes activity in basil plant's rhizosphere, a field experiment was conducted as a split-plot design with randomized complete blocks and three replications in 2006. The main plot involved six levels of fertilizer including: 20 and 40 tons of compost enriched, 20 and 40 tons of vermicompost enriched per hectare, chemical fertilizer and control without fertilizer and sub-plot, and period of application (two, three and four years). The results showed that application of compost and vermicompost at all levels increased soil organic carbon (OC) and soil microbial respiration, microbial biomass and urease activity compared to the controls (p<0.05), but increasing trend among the treatments was not similar. The maximum amounts of OC, soil microbial respiration and enzyme activity were observed in 40 tons of vermicompost enriched with chemical fertilizer ha-1 with four years of application. In high levels of compost application, the urease activity was decreased.
M. Rabie, M. Gheysari, S.m. Mirlatifi,
Volume 17, Issue 63 (6-2013)
Abstract
Nitrate leaching from agricultural lands can pollute groundwater, and the degree of pollution caused significantly depends on agricultural practices implemented on farms. Field studies required to evaluate the effects of various agricultural management strategies on nitrate leaching are expensive and time consuming. As a result, it is suggested to use crop models to simulate the effects of management practices on nitrate leaching. Plant growth models such as DSSAT software package can simulate daily plant growth and development, and also are capable of simulating daily nitrate leaching and nitrogen uptake by plants. However, it is required to evaluate the performance of any model before using it for any specific region. In this study, the performance of nitrogen balance model of DSSAT software package was evaluated to simulate nitrate leaching from the root zone of silage maize at different levels of applied water and nitrogen fertilizer. The experiment consisted of three levels of nitrogen fertilizers, including zero, 150 and 200 kg N ha-1 and four levels of applied water 0.7SMD (soil moisture depletion), 0.85SMD, 1.0SMD and 1.13SMD. Nitrate-nitrogen leaching from 36 plots at the 60 cm depth during the growing period was measured by soil moisture suction equipment (ceramic suction cups, CSC). After calibrating the model by using field data, its performance was evaluated to simulate nitrate leaching. Maximum amount of N leaching 8.4 kg N ha-1 was obtained from over irrigation treatment with the application of 150 kg nitrogen per hectare. The model simulated nitrate leaching for this treatment as 7.8 kg N ha-1. The model consistently underestimated the nitrate leaching however, it followed the behavior of nitrate leaching during the growing season. In deficit irrigation treatments, the nitrate leaching was very low and close to zero and the model simulated the same result accordingly. The results showed that the model, in addition to phenological stages and performance indicators, can simulate nitrate leaching from the root zone and could be used to evaluate the effects of various irrigation and fertilizer management strategies on nitrate leaching.
A. Samadi, E. Sepehr,
Volume 17, Issue 65 (12-2013)
Abstract
In order to determine optimum equilibrium solution phosphorus (P) concentration using P adsorption isotherm and obtain model(s) by integrating soil solution P concentration, physicochemical properties, and soil P test (available P) which predict standard P requirements to achieve maximum yield, laboratory and glasshouse experiments were conducted on 36 soil samples belonging to 15 soil series and 14 soil samples, respectively. Using wheat as a test crop, the glasshouse experiment was laid out with five P levels in a completely randomized design with three replications. Concentrations of P in solution established by adding P in the pots estimated from the sorption curve ranged from 0.2 to 1.2 mg P/L including check treatment (no P). The results showed that equilibrium solution P concentration (EPC) was almost low in comparison with the requirement for most crops (<0.2 mg/L). The amount of P adsorbed by the soils at 0.2 mg/L EPC ranged from 5 to 114 mg/kg soil. The phosphate adsorption was well described by Freundlich (R2 = 0.96) and Langmuir (R2 = 0.88) isotherms. Langmuir maximum adsorption (Xm) and Freundlich coefficient (aF) estimated from Langmuir and Freundlich equations ranged from 127 to 238 mg P /kg soil and from 43 to 211 mg P/kg, respectively. Yield of wheat in all soils approached maximum as adjusted P levels were increased to 0.4 mg P/L. The results showed that some soils studied were adequate in available P by the NaHCO3 test, but required an amount of P fertilizer by the isotherm P requirement test to obtain maximum biomass production. Soil clay content was significantly related to the soil P sorption indices, P0.4 (P sorbed at 0.4 mg P/L EPC) (R = 0.40, P<0.01), PBC (P buffering capacity) (R = 0.54, P<0.001), aF (R = 0.48, P<0.01), and Xm (R = 0.40, P<0.01). Total CaCO3 and Active CaCO3 were found to be less important factors affecting P adsorption. Using stepwise regression analysis resulted in a useful regression model including the combination of Olsen P and clay content for the prediction of standard P requirement (P0.4).
A. Mohammadi, M. A. Bahmanyar,
Volume 18, Issue 68 (9-2014)
Abstract
In order to investigate the cumulative effect of three-year application of municipal solid waste compost (C) and the compost accompanied with chemical fertilizer (CF) on the concentrations of some heavy metals in various organs of rice plant, a field experiment with completely randomized design in three replications was performed in 2009. Treatments were as follows: Control (without C and CF), CF (100 kg urea, 100 kg super phosphate and 100 kg potassium sulphate per ha), 15, 30 and 45 tons of C without CF, 15, 30 and 45 tons of C with 25%, 50% and 75% CF. Results showed that application of compost in three years would increase the amounts of Ni, Pb, Cd and Cr in different organs of rice plant. Also, application of C accompanied with CF increased the amount of Ni, Pb, Cd and Cr in various organs of rice compared to C. The highest concentration of nickel and lead (9.1 and 7.8 mg.kg-1 respectively) were obtained in grains in 45 ton C + 50% CF per ha treatment. Meanwhile, the maximum content of cadmium in grain (1.6 mg.kg-1) in 30 ton C + 75% CF ha-1treatment, and the highest amount of chromium in grain (1.8 mg.kg-1 ) resulted from 30 ton + 25% CF ha-1treatment.
M. Norouzi, A. H. Khoshgoftarmanesh, M. Afyuni,
Volume 18, Issue 70 (3-2015)
Abstract
Organic fertilizers affect soil chemical and physical properties, particularly chemical forms of zinc in soil solid phase and thereby improve soil Zn availability. The present field study was aimed to evaluate the effects of organic and chemical fertilizer (zinc sulfate) on different zinc fractions in soil solid phase of rhizosphere in two successive years in Rudasht Research Field, Isfahan. Treatments consisted of sewage sludge (5 and 10 t ha-1), cow manure (5 and 10 t ha-1), and ZnSO4 (40 Kg ha-1). The control had no added Zn. Three weeks after applying fertilizer treatments, Back Cross genotype of wheat was cultivated in each plot. Our results showed that the organic fertilizers increased Zn concentration in exchangeable fraction (EXCH-Zn), the organically bound Zn form (ORG-Zn), and Zn bound to iron and manganese oxides (FeMnOX-Zn). However, the changes in Zn fractions were dependent on the fertilizer type. Positive and significant correlation between EXCH-Zn, ORG-Zn, and FeMnOX-Zn, and the total Zn uptake by wheat indicated that these pools of Zn in solid phase are labile pools with a significant role in supplying Zn for plants.
M. M. Matinzadeh, J. Abedi Koupai, H. Nozari, A. Sadeghi Lari, M. Shayannejad,
Volume 20, Issue 76 (8-2016)
Abstract
In this research, a comprehensive simulation model for water cycle and the nitrogen dynamics modeling including all the important processes involved in nitrogen transformations such as fertilizer dissolution, nitrification, denitrification, ammonium volatilization, mineralization, immobilization as well as all the important nitrogen transportation processes including nitrogen uptake by the plant, soil particles adsorption, upward flux, surface runoff losses and drain losses, was used for fertilizer management modeling in a sugarcane farmland in Imam Khomeini Agro-Industrial Company using a system dynamics approach. For evaluating the model the data collected from Imam Agro-Industrial Company equipped with a tile drainage system with shallow ground water and located in Khuzestan province, Iran, were used. The statistical analysis of the observed and simulated data showed that the RMSE for determining the accuracy of simulation of the nitrate and ammonium concentration in drainage water is 1.73 mg/L and 0.48 mg/L, respectively. The results indicated that there is good agreement between the observed and the simulated data. Nine scenarios of fertilization at different levels of urea fertilizer were modeled including one scenario of 400 kg/ha, two spilit scenarios of 350 kg/ha, two spilit scenarios of 325 kg/ha, two spilit scenarios of 300 kg/ha, one scenario of 280 kg/ha and one scenario of 210 kg/ha. Results of the modeling showed that the scenario of 210 kg/ha has the highest nitrogen use efficiency (52.3%) and the lowest nitrogen losses consisted of denitrification, ammonium volatilization and drainage losses (17.82, 7.16 and 92.59 kg/ha, respectively). The results revealed that increasing the consumption of urea fertilizer greater than 210 kg/ha increased the overall nitrogen losses and reduced the nitrogen use efficiency. Meanwhile, this model can be used for managing the fertilizer and controlling the nitrate and ammonium concentrations in the drainage water to prevent the environmental pollution. Also, the system dynamics approach was found as an effective technique for simulating the complex water-soil-plant-drainage system.
A Heidari, H. Haji Agha Alizadeh, A. R. Yazdanpanah, J. Amiri Parian,
Volume 20, Issue 78 (1-2017)
Abstract
Traditionally, most corn field in Hamedan Province is prepared for planting by moldboard plowing followed by a number of secondary tillage operations. In recent years conservation tillage systems have become more popular. This research was conducted in the form of a split plot experimental design with six tillage treatments and three replications. Main tillage methods including: (T1) conventional tillage (moldboard plow + cyclotiller equipped with roller), (T2) combination tiller (chisel plow equipped with roller) (T3) bandary tillage with chisel blades were considered as main plots and two P fertilizer application including: (F1) fertilize broadcasting and (F2) fertilizer bandary placement were considered as sub plots. During growing seasons, soil mechanical resistance (cone index), soil bulk density and water infiltration in soil were measured. At the end of the growing season (harvesting time), corn yield and its components were measured. Results indicated that tillage methods and soil depth had a significant effect on the soil bulk density and cone index. The effect of tillage on water infiltration in soil was significant. The effect of P fertilizer application on corn yield was significant (P≤0/01) and P fertilizer bandary placement with mean corn yield of 10862 kg/ha had higher yield value than the fertilizer broadcasting with mean corn yield of 9965 kg/ha. Although the difference between tillage methods for corn yield was not statistically different, T2 treatment with mean corn yield of 10913 kg/ha had higher yield value than the other two tillage treatments (T1 with mean corn yield of 10106 kg/ha and T3 with mean corn yield of 10222 kg/ha).
