Showing 14 results for Furrow Irrigation
A. Alizadeh, A.g. Ghorbani, G.h. Haghnia,
Volume 4, Issue 4 (1-2001)
Abstract
In order to compare the effect of drip and furrow irrigation methods with different quantities of water (50%, 75%, and 100% of the amount of water evaporated from class A pan evaporation during irrigation intervals) on yield and quality of tomato, an experiment was conducted on a silty loam soil in Mashhad Agricultural Research Station. The experimental design was a factorial trial with completely randomized blocks and. four replications.
The results showed that the highest yield (51 t/ha) was obtained from the treatment of drip irrigation with 100% water application. This amount was 4.5 tons higher than the yield from furrow irrigation treatment. Deficit irrigation by 25 and 50 percent decreased total yield by 34.7% and 67.95% in the drip irrigation method and by 27.57% and 64.29% in the furrow irrigation, respectively. Water use efficiency in drip irrigation was two times higher than that in the furrow treatment. Quality and chemical composition of the fruits were not significantly different in the two irrigation methods. Increasing the water deficit, however, increased the amount of soluble solids of the fruits.
M. M. Ghasemi, A. R. Sepaskhah,
Volume 7, Issue 2 (7-2003)
Abstract
In this study, the effect of deficit irrigation with every–other furrow irrigation method, which is an innovated method in farm irrigation management, was examined on sorghum (Sorghum durra L.) in Bajgah and Kooshkak areas of Fars Province. The experimental design was split plot with three main plots of irrigation interval (10, 15 and 20 days), three subplots of irrigation methods (ordinary furrow, fixed and variable every–other furrow), and 4 replications. Considering the crop production cost with real and subsidized prices of water in both areas, the net benefit per unit volume of irrigation water and benefit–cost ratio were calculated. The results showed that these economic parameters for the fixed and alternative furrow irrigation methods of 10-day intervals in both areas did not differ much with those of the ordinary furrow irrigation with 10-day intervals and were even higher in Bajgah area. Furthermore, the relationship between the amount of irrigation water, water application efficiency (Ea), water price per unit volume (Cw) and the net benefit per unit volume of irrigation water (B) with different conveyance efficiencies (Ec) were determined by multiple linear regression procedure. The regression coefficients of linear fit equation between the costs and irrigation water were determined. The results indicated that with higher price of water, the farmer should increase the farm irrigation application efficiency to avoid the economic losses.
A. A. Azizi Zehan, A. A. Kamgar-Haghighi, A. R. Sepaskhah,
Volume 10, Issue 1 (4-2006)
Abstract
Iran with a cultivation area of 45000 ha and production of 150 ton/year is the number one saffron producer in the world. Planting of large size corms will increase flowering, but production of corms (number and size) may be affected by irrigation method or frequency. In this research which is performed in the farm of College of Agriculture, Shiraz University, the effects of method and frequency of irrigation on corm production, and the effect of produced corms on flowering were evaluated in two consecutive years. Two irrigation methods (basin and furrow) with four levels of irrigation frequencies (12, 24 and 36 days and dryland farming) were applied. In August of 2000 sample corm was taken from every plot, and the effect of applied treatment from previous growing period on corm production and the effect of produced corms on future flowering were evaluated and analyzed. Based on the results, in furrow irrigation, total number of corms and total number of corms smaller than 4 gr is significantly higher than basin irrigation. In all of the above cases, irrigation frequencies did not show a meaningful difference between themselves or in comparison with dryland farming treatment. Total weight of corms and number and weight of corms larger than 8 gr in basin irrigation were more than furrow irrigation. This is to the extent that it is considered as the main reason for the difference in the flowering of corms, and has caused the flowering of basin irrigation to be significantly higher than furrow irrigation. In basin irrigation, irrigation frequencies of 12 and 24 days had the highest amount of flowering. No significant difference was observed on average corm production between the treatments in the two irrigation methods. However, irrigation treatments in both irrigation methods showed significant differences when compared with dryland farming treatment. So, basin irrigation with irrigation frequency of 24 days is preferred over furrow irrigation due to lower water consumption and production of larger size corms which is effective in flowering.
S. H. Tabatabaei, H. Fardad, M. R. Neyshabory, A. Liaghat,
Volume 10, Issue 1 (4-2006)
Abstract
To determine the water application efficiency in furrow irrigation more accurately, consideration of seasonal and spatial variation of infiltration properties are needed. In addition, the effectiveness of different farm management on infiltration are significant. The main objective of this research was to simulate the seasonal variation (SV) of infiltration coefficients in Kostiakov-Louise equation (KLE) in a cracking soil under two traditional farm managements. Farm studies carried out in a clay-loam soil in Karaj. The two management treatments were soil without wheat residual and soil with wheat residual by a 5 ton/ha rate. There were 22 furrows with 0.75 m width in the farm. KLE infiltration coefficients were measured using inflow-outflow and two point’s methods in six furrows. The results of this study indicated that the SV of a and k coefficients were not significant, but variation of f0 was significant which was simulated with a logarithmic model. The effectiveness of SV on cumulative infiltration (Z) was also evaluated and indicated to be significant that were simulated with a logarithmic model too. Finally, dimensionless parameter such as Z* were developed to predicate Z parameter in different irrigation time, irrigation events and different residual management. Base on the result, although residue management causes a significant difference between value of f0 and Z in two treatments, but it doesn’t effect on trend of variation during the season. It means that the trend of variation is independent of residue in soil. It is probably done because of change in some of soil physical properties such as soil bulk density and aggregate stability.
F. Abbasi, F. Tajik,
Volume 11, Issue 1 (4-2007)
Abstract
Estimation of unsaturated soil hydraulic and solute transport properties by Inverse modeling has thus far been limited mostly to analyses of one-dimensional experiments in the laboratory, often assuming steady-state conditions. This is partly because of the high cost and difficulties in accurately measuring and collecting adequate field-scale data sets, and partly because of difficulties in describing spatial and temporal variability in the soil hydraulic properties. In this study we estimated soil hydraulic and solute transport parameters from several two-dimensional furrow irrigation experiments under transient conditions. Three blocked-end furrow irrigation experiments were carried out, each of the same duration but with different amounts of infiltrating water and solutes resulting from water depths of 6, 10, and 14 cm in the furrows. Two more experiments were carried out with the same amounts of applied water and solute, and hence for different durations, on furrows with water depths of 6 and 10 cm. The saturated hydraulic conductivity (Ks) and solute transport parameters in the physical equilibrium convection-dispersion (CDE) and physical nonequilibrium mobile/ immobile (MIM) transport models were inversely estimated using the Levenberg-Marquardt optimization algorithm in combination with the HYDRUS-2D numerical code. Estimated Ks-values ranged from 0.0389 to 0.0996 cm min-1, with a coefficient of variation of 48%. Estimated immobile water contents (θim) were more or less constant at a relatively low average value of 0.025 cm3 cm-3, whereas the first-order exchange coefficient (ω) varied between 0.10 and 19.52 min-1. The longitudinal dispersivity (DL) ranged from 2.6 to 32.8 cm, and the transverse dispersivity (DT) from 0.03 to 2.20 cm. DL showed some dependency on water level and irrigation/solute application time in the furrows, but no obvious effect was found on Ks and other transport parameters. Agreement between measured and predicted infiltration rates was satisfactory, whereas soil water contents were somewhat overestimated and solute concentrations underestimated. Differences between predicted solute distributions obtained with the CDE and MIM transport models were relatively small. This finding and the value of optimized parameters indicate that observed data were sufficiently well described using the simpler CDE model, and that immobile water did not play a major role in the transport process.
S. Akhavan, S. F. Mousavi, B. Mostafazadeh-Fard, A. Ghadami Firoz Abadi,
Volume 11, Issue 41 (10-2007)
Abstract
To investigate yield and water use efficiency (WUE) of potato with tape and furrow irrigations, an experiment was performed at Hamadan Agricultural and Natural Resources Research Center (Ekbatan station) in 2004. The experiment was arranged in a split-plot experimental design based on completely randomized block with 3 replications of irrigation water amount as the main factor (75%, 100%, 125% of cumulative evaporation from class A pan) and sub-factor of irrigation method [including tapes in the middle of furrow ridge on soil surface (TD0), tapes in the middle of furrow ridge at the depth of 5 cm (TD5), tapes on the sides of furrow ridge on soil surface (TS0), and furrow irrigation (F)]. The results indicated that yield of potato increased with increasing water use. Regardless of irrigation method, maximum (32.51 ton/ha) and minimum (19.33 ton/ha) yield of potatoes was achieved with 125% and 75% irrigation water treatments, respectively. The lowest yield (21.35 ton/ha) was obtained in furrow irrigation and the highest yield (28.91 ton/ha) belonged to tape irrigation (TD5 treatment). The highest WUE (4.68 kg/m3) belonged to tape irrigation (TD5 treatment) and the lowest WUE (3.32 kg/m3) belonged to furrow irrigation (F). The difference in WUE between 75% and 100% irrigation water treatments was not significant. The highest WUE (4.49 kg/m3) was achieved in treatment 125%. Also, it is more economical to use irrigation water treatment of 125%, as compared with other irrigation water treatments.
A Sheinidashtegol, H.a Kashkouli, A.a Naseri, S Boromandnasab,
Volume 13, Issue 49 (10-2009)
Abstract
Sugarcane has been cultivated in an extensive area in Khuzestan and irrigated by hydro-flume or siphon and furrow. In a field experiment during 2005-6 at Amir Kabir Agro-Industry, Khuzestan, the effect of every other-furrow irrigation method was studied on sugarcane in regard to irrigation water volume, water use efficiency and quality and quantity of sugarcane. The experiment was conducted in a completely randomized design with three irrigation treatments, including conventional method (blank), variable every other furrow(alternative furrow) and fixed every other furrow. This experiment was conducted by cv. Cp69-1062 sugarcane. The results showed that water use efficiency rates were 0.41, 0.58 and 0.7 kg/m3 for conventional, fixing furrow and alternative, respectively. However, water use efficiency rates were not significantly different in treatments. It had minimum amount of water use efficiency in every other furrow treatments. Maximum water use efficiency, quality and quantity of sugarcane were obtained every other irrigation. Maximum irrigation water was used in conventional treatment and resulted in minimum irrigation, quality sugarcane and water use efficiency. It produced 14.5 ton/ha sugar for 20604 m3/ha application of irrigation. Sugarcane quality and quantity characteristics in variable treatments, except for length number per hectare, were not significant.
H.a Alizadeh , F Abbasi , A Liaghat ,
Volume 14, Issue 51 (4-2010)
Abstract
The application of N fertilizers with surface irrigation stream (surface N fertigation( is a key approach for fertilizer management. The main objective of this study was to investigate furrow fertigation management effects on distribution uniformity and runoff losses of nitrate in field scale. A field corn experiment was carried out with a complete randomized block design having 12 experiments. The field experiments were carried out in free draining furrows having 165 m length and 0.006 m/m slope in Karaj. Required urea fertilizer was applied in four stages: before planting, in seven leaves stage, shooting stage and earring stage. The first stage was accomplished by traditional method and other stages were applied with irrigation water (fertigation). Fertigation timing was respectively 60, 35, and 20 min in the three fertigation stages. Results showed that distribution uniformity of water and fertilizer of low half (DULH) provided high values for all experiments. DULH ranged between 88.0 to 99.0% and 89.7 to 96.0%, respectively for water and fertilizer. Also, distribution uniformity of low quarter (DULQ) ranged between 86.0 to 98.2% and 85.7 to 91.5%, respectively for water and fertilizer. Nitrate losses through surface runoff ranged between 5.7 to 42.0%. Duncan test results for comparison between different experiments showed that there was significant difference (p=0.95) between fertilizer losses at the level of fertilizer injection time of 60 and 35 minutes, but there was no significant difference between levels of 35 and 20 minutes.
P. Shahinrokhsar, M. E Asadi,
Volume 16, Issue 61 (10-2012)
Abstract
Modification of irrigation scheduling and management improvement of irrigation systems are two essential factors that have significant impact on agricultural water use efficiency. Therefore, a field experiment was conducted to evaluate the effect of tape drip irrigation (T) and furrow irrigation systems (S) under different irrigation regimes on yield and yield components of soybean in growing season of 2006-2007 at Gorgan Agricultural Research Station in north part of Iran. The experiment was laid out in a split plot design in a randomized complete form where each treatment was replicated three times. The main plots were irrigation systems of tape and furrow, and three irrigation regimes 100 (I100) , 75 (I75) and 50 (I50) percent of total irrigation requirement were chosen as secondary plots. Results showed that thousandgrain weight (gr) and plant height (cm) in furrow irrigation were significantly more than the tape drip irrigation method. Also significant differences between different irrigation regimes in terms of plant height, node numbers and yield were observed. So, I100 and I50 had highest and lowest values, respectively. In terms of irrigation system, 63 percent of water consumption was reduced in tape drip irrigation method. Also, the results indicated that higher and lower water use efficiencies were obtained from tape drip irrigation method with I50 treatment (1.09 kg m-3) and furrow irrigation with I100 treatment (0.50 kg m3), respectively.
Bita Moravejalahkami, Behrouz Mostafazadeh-Fard, Manouchehr Heidarpour, Saeed Eslamian, Jaber Roohi,
Volume 17, Issue 64 (9-2013)
Abstract
Most furrow irrigation systems have low performance due to deep percolation at the upstream end and tailwater runoff at the downstream end of the field. To eliminate this problem improving furrow irrigation performance is necessary. Since the inflow discharge has high effect on infiltration along the furrow which consequently affects the application efficiency and water distribution uniformity, it would be important to apply different furrow inflow hydrograph shapes based on the field data such as field slope, soil texture and furrow length to save water. To produce different furrow inflow hydrograph shapes, an automatic valve which was connected to a stepper motor was designed to change the inflow discharge with time according to the desired inflow hydrograph shape. The experimental field was located at Isfahan University of Technology. A constant head water delivery system to the furrows including the automatic valve was installed in the experimental field and the tests were conducted for different inflow hydrograph shapes. The comparison of the measured furrow inflow discharges with the simulated furrow inflow discharges produced by the automatic valve showed that the automatic valve can produce different furrow inflow hydrograph shapes with high accuracy.
R. Lalehzari, S. Boroomand-Nasa, M. Bahrami,
Volume 18, Issue 69 (12-2014)
Abstract
Advance velocity is an important factor in surface irrigation system design and simulation. Volume balance is a simple model based on continuity equation used in surface irrigation design and management. In the past volume balance models, it is generally assumed that the upstream depth of surface water is constant and equal to normal depth. This initial assumption may cause significant errors in computing advance flow. In this paper, a modified volume balance (MVB) model is developed to predict the advance curve in furrow irrigation. In the suggested method the upstream surface, water depth is actual depth and variable in time. Predicted advance distance of VB, VB-ZI and MVB was compared to the observed data obtained for the three furrow lengths of 60, 80 and 90m. Evaluation indexes indicated that the modified volume balance equation is more accurate than the previous equations by RMSE 9.26, 7.37 and 6.76 respectively. Sensitivity analysis showed that the inlet discharge has the greatest effect on the model and the model is more sensitive to decreasing the discharge amount than to increasing it
B. Moravejalahkami,
Volume 23, Issue 3 (12-2019)
Abstract
Furrow irrigation is the most common method of surface irrigation. However, the accurate estimation of the soil water infiltration equation is the most important challenge for evaluating this method of irrigation. In this study, a fast and simple method that is named soil intake families and presented by USDA-NRCS (RSIF), evaluated for estimation of the Kostiakove-lewis infiltration equation parameters based on soil information. Also, this method was developed based on irrigation condition and considering soil characteristics (D-RSIF). Two treatments including constant and variable inflow discharge were tested with 4 repetitions and different irrigation phases including advance, storage and recession were simulated by developed Zero-Inertia model using RSIF and D-RSIF methods. The results showed that using the zero- inertial model, the difference between simulated advance times and simulated runoff were significant at 5% level for D-RSIF and RSIF methods. For variable inflow discharge, the error of estimating runoff volume was 10%, 6%, 12% and 41% for RSIF, D-RSIF, multilevel calibration and two-point methods respectively. Also, the irrigation scheduling error, based on soil physics characteristics (RSIF) was 14% that means consuming water more than required.
O. Asadi Asadabad, S. H. Matinkhah, Z. Jafari, H. Karim Mojeni,
Volume 25, Issue 1 (5-2021)
Abstract
In order to investigate the effect of the type drip of irrigation methods, subsurface irrigation and furrow irrigation on the domestication of Hedysarum criniferum Boiss., an experiment with a randomized complete block design with three replications was implemented at Isfahan University of Technology for two years (2016 to 2018) . For this purpose, clay pipes were made and the plant was cultivated on the sides of clay pipes and types. Also, furrow irrigation treatment was applied as the control. During the experiment, all treatments received the same water and finally, some growth parameters were measured. The results of the study showed improvement in height (0.43 and 0.34), canopy cover (0.66 and 0.52), stem number (0.44 and 0.85), chlorophyll index (0.45 and 0.45), seed emergence (0.75 and 0.30), plant survival (0.78 and 0.55), yield (0.23 and 0.35), and water use efficiency (0.25 and 0.25) under type drip irrigation treatment, as compared to subsurface and furrow irrigation, respectively (P<0.05). In general, the type drip treatment is recommended in the early years of planting; however, since the maximum production potential of this plant is in the third year onwards, it is necessary to examine the results in the following years to recommend the proper irrigation method, especially the use of subsurface irrigation.
F. Haghnazari, M. Ghanbarian Alavijeh, A. Sheini Dashtegol, S. Boroomand Nnasab,
Volume 25, Issue 1 (5-2021)
Abstract
Changes in soil infiltration cause changes in irrigation efficiencies; therefore, estimating it in calculating irrigation efficiencies provides a more accurate estimate of irrigation performance indicators. In a study conducted on ARC2-7 farm in Amirkabir agro-industry in the 2010-2011 crop year, during four irrigations; two furrows were selected in terms of uniform infiltration and variable infiltration with a length of 140 and a width of 1.83 m. In the furrow assuming uniform infiltration two flume type II, at the beginning and end of it, were installed and the cumulative infiltration was determined by the volume balance method. The furrow with variable conditions was divided into four sections by installing five flumes. By examining the spatial variations of the mean cumulative infiltration, its value decreased from the first to the fourth section for the first irrigation by 15% and for the subsequent irrigations by 13%. Temporal changes of cumulative infiltration decreased by 27 and 30% for the first and second sections and by 26% for the third and fourth sections. An 11% increase in the average weight of the aggregate diameter and a 7% decrease in bulk density indicate physical changes in the soil. Surface runoff losses increased from 8 to 18.77% in the furrow assuming uniform infiltration and from 10.91 to 19.77% in the furrow with variable infiltration, and application efficiency decreased by 6%.
