JWSS - Journal of Water and Soil Science

---

Growth and grain yield of irrigated barley cultivars (Valfajr, Binam and Raihaneh) was investigated at 4 sowing dates (6, 22 Oct. and 14, 20 Nov.) in Karaj region. The effect of sowing date, genotype and their interaction on grain yield were statistically significant. Early and late sowing enhanced cold damage. However, the damage was more in late sowings. It was estimated that the optimum sowing date would be about 50 days (600 GDD) prior to freeze-up and maximum cold damage would occur when sowing was delayed until some 22 days (230 GDD) before freeze-up but any more delay in sowing would cause less damage. Highest grain yield was obtained from Raihaneh at 22 Oct. sowing. Binam showed good yield stability and relatively high yield, especially in unfavorable sowing dates. In the relatively favorable sowing dates (6 and 22 Oct.), grain weight showed positive correlation with linear grain filling rate, storage and translocation of reserves. LAI, LAR, RGR, CGR and LAD of each cultivar were higher in the second sowing date compared to the first one. The “ratio of post anthesis growth to maximum TDM” showed a high correlation with the harvest index. Raihaneh was the highest cultivar in resistance to lodging, harvest index, storage and retranslocation of assimilates, and linear grain filling rate. It is suggested that at favorable sowing dates, Valfajr and Binam had source limitation or disturbed translocation and Raihaneh had sink limitation.

---

Rice bran is the most important by-product of rice milling. It is a valuable source of edible oil in most rice producing countries. Rice bran oil is used in babyfood, biscuit, poultry, fish and farm animal feeds. The storage of rice bran without 'heat processing will result in hydrolysis and auto-oxidation of lipids, and to its decreased physicochemical, organoleptic and nutritional quality. Rice bran is rich in carbohydrates, free amino acids, lipids and different enzymes. The enzymes have destructive effects on the quality of rice bran components. Heat processing is an effective method to reduce the microbial and enzymatic activity of bran. This study was carried out using a factorial experiment by completely randomized design with three replications to investigate the effect of heat treatment and storage time on rice bran crude oil properties.

The parboiling treatment was effective on the rice kernel strength. The bran produced from parboiled rice milling had lower endosperm components. This type of bran had a lower starch but a higher oil percentage. The results of color of rice bran oil samples determined by Lovibond showed that the oil from parboiled rice bran before and during storage had better color than the other samples. Iodine value of bran oil from parboiled paddy decreased during the storage period. The results from studies on fatty acid composition of oil samples determined by gas chromatography (G.C.) showed that the quantitative trend of fatty acids of the control sample remained the same as that in the rice bran samples with the treatment process.

---

Due to physiography and weak structure, the pasture soils in Boroojen are potentially degradable. Converting pastures to agricultural land accelerates the degradation processes. A study was conducted in 1999 to show the effects of almost 20 years of farming on originally pasture land on soil physical properties, fertility, and tilth index of pastures in Boroojen region in Chahar Mahal and Bakhtiari Province (central Zagrous). Soil texture, clay content, bulk density, organic matter, saturation moisture percent, cone index, plasticity index, mean weight diameter and aggregate size and distribution, nitrogen, phosphorus, and potassium were measured.

After 20 years of cultivation, bulk density increased about 20% while organic matter decreased by 30%. Cone index was lower in the undisturbed pasture but nitrogen and phosphorus contents were higher compared to the disturbed pasture. The undisturbed pasture contained more larger (> 1 mm) aggregates, while the disturbed pasture had more smaller aggregates. Sustainable use of natural resources will lead to their long term workability, while negligence of conservational practices including appropriate farming management practices will result in the destruction of these resources.

---

In quantitative land suitability evaluation, economic aspects land evaluation such as impact of environmental physical factors on crop production and the amount of yield per surface unit are considered. The purpose of this research was to study quantitative land suitability of northern Baraan area located in eastern Isfahan. The study was a continuation of the previously accomplished qualitative land suitability evaluation of the area. The economic studies include economic data collection, matching inputs and outputs and gross margins analysis. Radiation-thermal production potential of the crops was calculated based on plant physiology and temperature (FAO model), which was 10.45, 10.11, 13.64 and 11.93 ton/ha for wheat, barley, maize and rice, respectively. Radiation-thermal production potential, observed and marginal yields and the results of the qualitative land evaluation were used to perform quantitative land evalution and to determine the corresponding suitability classes. The predicted yield in different land units varies between 1.64 and 9.17 ton/ha for wheat, 1.81 and 9 ton/ha for barley, 2.06 and 9.42 ton/ha for maize and 2.35 and 7.14 ton/ha for rice. Presence of significant statistical correlation between the observed and the predicted yield values reveals the validity of the evaluation methods used. The results from quantitative land evaluation show that most of the land units are slightly to moderately suitable for wheat, barley, maize and rice, while a few are not. The best land utilization type in each land unit can be selected through a combined consideration of quantitative land evaluation results, benefitability of each land unit and impact of the land use on the soil. Rice cultivation is not recommended in the study area, because of its adverse effect on soil physical properties and soil drainage.

---

Fecundity of Shah-Koolee in the Sefidrood river, which is one of the economic and popular fishes in northern part of Iran, was studied. From April to August 2000, 539 Shah-Koolee fishes were caught at the specific station in the Sefidrood river from the sea shore to Kisum. Seventy one samples of unspawned fishes were taken, the primary biometry was performed, specimens of the different parts of the ovary were prepared and absolute fecundity was determined through gravimetry. Maximum and minimum fecundity rates were 18860 and 2929 eggs, respectively, that related to eight- and three- years old fishes. Relative fecundity was 132±37 and 72 eggs per gram of weight. The relationship between absolute fecundity and length and weight was linear, correlation and numerical quantities of a, b and r were calculated and regression graph was drawn. Gonado Somatic Index (G.S.I.) was used to determine the natural spawning region and calssification was done on the basis of two factors, age and station. It was found that three- years old fishes with a regeneration power of 17.05 in comparison with other age groups had higher potential. This index also showed that Astaneh and Kisum stations were favorable places for natural spawning of these fishes.

---

Soil tilth is crucial to seedling emergence, plant growth, and crop yield. Soil tilth of unstable soil is very susceptible to change. Internal forces originating from matric suction can change soil physical properties. A laboratory study was conducted on pots of a surface silty clay loam soil of Khomeinishahr series (fine-loamy, mixed, thermic Typic Haplargids, USDA), located in Research Farm of Isfahan University of Technology. Soil surface subsidence, bulk density, cone index, and tensile strength were measured after first flood irrigation. Results showed that the seedbed (0-20 cm) with a bulk density of 1.2 Mg.m^-3 will be changed to a massive soil with high values of bulk density, cone index, and tensile strength after soil wetting. Slaking, slumping and coalescence of the soil caused soil surface to subside about 1.5 cm in 20 cm soil layer. After irrigation, cone index and tensile strength increased abruptly with decreasing of moisture content. It is shown that the dominant source of strength (cone index and tensile strength) gain during drying is the effective stress due to matric suction. In the absence of external loads, physical state (tilth) of the soil returned back to the original state. Therefore, soil slaking and slumping and rearrangement of particles along with the internal forces are the factors leading to soil hardness.

---

Planting density, through its impact on the level of available environmental factors may have significant impacts on grain yield in safflower (Carthamus tinctorius L.). In order to investigate the impacts of plant density on grain yield, yield components and growth characteristics of safflower, a randomized complete block design field experiment with four replicates was conducted in spring-summer, 2000, at Lavark Research Farm (Lat. 32⁰ 32^, N and Long. 51⁰ 23^, E), College of Agriculture, Isfahan University of Technology, Isfahan, Iran. Arak-2811 and Kouseh safflower genotypes were seeded at 16.6, 22.2, 33.3 and 50 plants/m². For establishing these plant densities, plants were seeded in 12, 9, 6 and 4 cm distances, respectively, on ten 8-m-long rows spaced 50 cm apart in each plot. Plant density had no impact on plant growth stages with the exception of button formation. Genotype had significant effects on days to seedling emergence, button formation, and 50% flowering. While both number of days and accumulated growing degree-days for all growth stages decreased with an increase in plant density, Arak-2811 was earlier than Kouseh for most growth stages. Number of branches and heads per plant, number of heads per branch, number of seeds per head and harvest index showed significant decreases with increasing plant density. The decrease in the mentioned grain yield attributes was mainly negated by greater number of plants per m², leading to no significant variation in grain yield between plant densities of the two genotypes. Arak-2811 produced a significantly greater number of heads per branch and 1000-grain weight however, these differences did not lead to any greater grain yield compared to Kousehdue, mainly due to the greater number of branches in the latter. Neither of the leaf area index, leaf area duration, and crop growth rate varied significantly with plant density and between two genotypes, suggesting no difference in dry matter production capabilities of the two genotypes under environmental conditions of the present study.

---

In order to increase the role of machine vision in agricultural research in Iran, especially for measuring physical attributes of seeds, a machine vision system was developed using a computer, a capture card, a video camera and a light box. All equipment was purchased from domestic markets. Computer programs were developed for hardware setup and for image processing applications. The programs perfomed tasks such as image acquisition and display, color conversion, image segmentation, object counting, and measurement of some physical attributes of the objects by analysing their images. The system was used to measure some physical attributes of pistachio nuts. The machine vision measurements were statistically compared with the measurements obtained by the conventional manual methods. The results indicated that there was generally no significant difference between the two methods. However, the time consumed by the machine vision method was far less than the time taken by manual methods. The experimental results also showed that there were many sources of error and limiting factors in using machine vision for measuring physical attributes of seeds.

---

Yield is a quantitative trait and improving grain yield through direct selection is time-consuming. Indirect selection consisting of selection indices is more promising. A field experiment was conducted during 1999-2000 growing season in two experimental locations (Kooshkak and Badjgah) of College of Agriculture, Shiraz University, Shiraz. Thirteen corn hybrids were used in a randomized complete block design with three replications in each location. Thirty-five traits were measured in five developmental stages (stem elongation, tasseling, blister, hard dough and physiological maturity) and combined analysis of variance and covariance were conducted. Finally, 12 traits were selected for constructing selection indices via path analysis. Two optimum selection indices were used in this experiment. In both selection indices, different combinations of traits applied as linear function (multivariate linear model) and coefficients of traits in combinations were calculated. The coefficient of indices were obtained from: b=P^-1Ga, where b is the vector of index coefficients, P^-1 is the inverse of phenotypical variance and covariance matrix, G is the matrix of genotypical variance and covariance and a is the column vector of traits heritability. In the first index, heritability of traits with the same sign was used as economic values. Selection index including grain yield and net assimilation rate in the second stage (NAR₂) was the best. In the second index, the sign of genotypic correlation with yield was given to economic values. Finally, selection index including grain yield and NAR₂ was the best, too. In both selection indices, correlation of selection indices with genotypic value was equal to 1. This was 14% higher than the first index including yield alone. In both selection indices, physiological indices including net assimilation, crop growth, and relative growth rates were the most important traits comprising the best selection indices.

---

Satellite data use is finding global applications because they provide repeated cover, broad information, high electromagnetic spectral resolution, and software-hardware compatibilities. This study aims to evaluate of the Landsat TM data capabilities in land-use mapping of Bazoft River basin (Chahar Mahale Bakhtiary Province). Six spectral bands of the Landsate TM were employed to produce land-use map of the Region. The date of image acquisition was May 5^th, 1998. Performance of the geometric correction completed with RMSE= 1.008 pixels. Various image enhacement methods (e.g. FCC, filtering and Vegetation Indices) were used to study the different land-covers. Field investigations were carried out using a GPS, 1:50000 scale topographic map and false color composites images. Heterogeneous land-use units were studied in 62 sample sites estimating percentage of vegetation cover. A regression analysis was performed between percentage vegetation covers and vegetation indices values of NDVI, RVI, SAVI, DVI, TSAVI₁, NRVI and MSAVI₂. Results show that NDVI, SAVI, TSAVI1, NRVI and MSAVI₂ have high correlation coefficients. But RVI, DVI and PVI have low correlation coefficients. The resulting values of vegetation cover were density sliced to produce the land-cover map. After supervised classifications and density slicing of Vegetation Indices, classifacation accuracy was assessed and, finally, land-use map of the study area was produced with Hybrid classification method. Supervised classification with maximum likelihood method was the best technique for land-use mapping in the study area the total Kappa index was %87. In general, detection of some land-use classes through single date TM data is not feasible, these include: scattered forest trees with cultivated understory, annual grasses, and fallow lands. Also TM digital data are incapable of distinguishing small and separated rural constructions or soil-covered routes.

---

This paper attempts to introduce two indices for measuring the level of Intra-industry Trade (IIT) between Iran and the members of the European Economic Community (EEC) according to five agricultural product groups. For this purpose, the indices suggested by Grubel-Lioyd and Aquino, were employed and explained how these indices obtained. The required data and information were collected from the year books and the internet site of “Iran Trade Point”. In general, the measured indices indicated a low level of trade between Iran and the members of EEC. In three groups, export value was higher than import value. On the contrary, for the two another groups of cereals and flowers, the import values were higher in most years. But in general, there wasn't seen any certain trend in indices values. In addition, many uses of these two indices also explained. Because Intra-Industry Trade is a new subject, further study and research seems to contribute to the economic communities specially in Iran.

---

The appropriate planting pattern of safflower in summer planting might be different from the planting pattern suitable for spring planting, and this has not been determined under Isfahan environmental conditions. A field experiment was conducted in the summer of 2000 at the Agricultural Research Station, Isfahan University of Technology, using a randomized complete block design with a split plot layout and three replications. Main plots consisted of three row distances (30 cm flat and 45 and 60 cm on bed), and sub-plots included three planting densities (30, 40, and 50 plant m^-2). The experiment was planted in June 13 using local safflower variety of Isfahan, named Koseh. Leaf area index, number of heads per branch, number of seeds per head, 1000-seed weight, seed yield per plant and harvest index were not significantly effected by row distance. Increase row distance significantly enhanced most developmental stages and increased number of branches per plant and per square meter, but significantly decreased number of heads per plant and per square meter and seed and petal yields. The highest seed and petal yields (3841 and 373 kg per ha, respectively) were obtained with 30 cm row distance. Plant density had no significant effect on number of branches per plant, number of seeds per head, 1000-seed weight and seed yield per plant and per unit area. Plant density significantly enhanced most developmental stages and increased leaf area index, number of branches and number of heads per square meter, but significantly decreased number of heads per branch and per plant, petal yield and harvest index. The highest seed yield without petal clipping (4341 kg per ha) was obtained with 30 cm row distance and 50 plants m^-2 treatment. The results obtained in this experiment indicate that this planting pattern might be appropriate for summer planting of safflower under conditions similar to this experiment.

---

The physiological characteristics of winter wheat(cv. Shiraz) were evaluated in a 2-yrs field study by using a spilit plot design with four replications, at the experimental farm of Shiraz University, College of Agriculture located at Badjgah. Main plots consisted of three sowing dates (November 6^th, December 6^th and January 5^th) and four planting densities (150, 250, 350 and 450 plants/m²) were assigned as sub plots. The results indicated that delay in sowing was associated with a significant reduction in the grain yield. So that the grain yield in sowing date of January 5^th was significantly less than it in sowing dates of November 6^th and December 6^th. Moreover with delay in sowing date the developmental rate of wheat was enhanced and plants reached maturity more rapidly. The trend of the leaf area index changes and the dry weight of the plants were under the effect of experimental treatments, leaf area index was found to be greater at the higher densities and early planting date. Number of stems per m² were decreased with delay in the sowing date, although at the higher densities, the number of stems per m² was greater, despite severe tiller death observed at these densities. The study of trend of dry weight changes during the season indicated that biomass was greater at higher densities and earlier sowings, which resulted in earlier ground cover and higher amount of radiation interception. In conclusion, the results of the present investigation revealed that to achieve a reasonable grain yield, the 6^th of December and 250 plants per m² were the best sowing date and planting density for wheat (cv. Shiraz) under similar agro climatic conditions with the present investigation.

---

In this paper, the effect of irrigation water salinity levels on seed germination, dry matter weight of seedlings at eight-leave stage, and the salt tolerance of 8 rapeseed cultivars was investigated. Relative yield reduction in saline and non saline conditions, salt sensitivity index and Van Genuchten-Hoffman methods were used to determine the salt tolerance of the cultivars. Results showed that the effect of different salt levels, cultivars and their interactions on germination and dry matter weight of seedlings was significant at 0.01(the higher the salt level, the lower the germination and dry matter). Also, using the Van Genuchten-Hoffman method, the irrigation water salinity corresponding to 10%, 25%, 50% and 90% reducts in germination and dry matter of seedlings were determined. Statistical analysis showed that a single cultivar gives different responses to salinity during growth stages and it may be tolerant in one stage, but sensitive to salinity in another growth stage. In this research, ACSN1, Falcon, and Shirali in germination stage and ACSN1, Falcon, and Cobra in seedling growth stage were salt tolerant. The three cultivars Oyerka, Global, and Ceres and the next three Shirali, Global, and Oyerka were sensitive to salinity in germination and seedling growth stages, respectively. Finally, the ACSN1 and Falcon cultivars were introduced as salt tolerant, and Oyerka and Global were considered as salt sensitive.

---

In order to evaluate grain yield potential and study dry matter remobilization to seed, 8 commercial bread wheat cultivars were examined in two separate experiments, using randomized complete block design with 4 replications in 2003. There were significant differences for most traits in normal and drought conditions. Sarday variety had the least grain yield in the two environments. There was considerable variation between genotypes for independent parameters of dry matter remobilization to different plant parts in the two environments. Factor analysis showed that seven factors accounted for 100 % of the data total variance in normal and drought conditions. Factor analysis also showed that the effective traits to components grain yield , height and phenological traits were important for the selection of appropriate genotypes. Calculation of drought resistance indices showed that four indices including mean productivity, geometric mean productivity, harmonic index, stress tolerance index were more effective than other indices for the selection of drought tolerant genotypes.

---

Studies show that excessive rotation of rice, when the grains revolve inside the milling chamber, increase the breakage. Ease of grain movement in the milling chamber could minimize this problem by utilizing screw conveyor at the first part of rotor. In this study the rotor of a conventional milling was equipped with a screw conveyor. The effects of two rotor types (modified and conventional rotors), three output rates (412, 654 and 915 kg/h) and three blade distances from the agitator (11, 12 and 13mm) were examined on indices of rice quality using a split-split plot design. In this experiment, the percentage of whole white rice and breakage, degree of milling and milling performance index were either measured or calculated. Results showed that only the effect of blade distance on percentage of breakage was significant whereas the effect of feed rate on all measured parameters was significant. In addition, the interaction effects of rotor type and blade distance, rotor type and feed rate on percentage of whole white rice and breakage were significant, respectively. The milling performance index showed that the best conditions for both rotors can be obtained at output rate of 412kg/hr and 11or 12mm blade distance from the agitator. For this adjustment, the average of percentage of breakage in the modified and conventional rotors were 20.5 and 23, respectively.

---

In order to examine the responses of proso millet (Panicum miliaceum) to drought stress at different growth stages, four breeded genotypes and a local one of proso millet were selected and planted in a split-plot design with five irrigation treatments and three replications.This experiment was conducted in two locations, Birjand and Sarbisheh. Irrigation treatments included well - watered, drought stress at vegetative stage, ear emergence stage, seed filling stage and vegetative and seed filling stages which were considered as main- plots. The first five mentioned genotypes were considered as sub-plots. Drought stress. caused a great reduction in grain yield and WUE at ear emergence stage. This reduction represented itself in the number of seed per ear and the weight of seeds, but it didn’t have any effects on the number of ear. At ear emergence stage, the drought stress increased the floret death and loss of weight of seeds which resulted in the reduction in the harvest index of both ear per plant and seed per plant. Comparison of genotypes indicated that since K-C-M.4 had a greater number of ears and K-C-M.9 had heavier seeds that had higher grain yield. These two genotypes had the highest WUE and their harvest indices were relatively higher. Due to the salinity of water and infertility of soil in Birjand, the grain yield was lower compared with Sarbisheh. In summary, it can be said that genotype K-C-M.4 proved to be more suitable for both areas.

---

Sainfoin in believed as an important forage crop regarding its suitable agronomical characteristics and feeding livestock. Evaluation of general combining ability is a critical preliminary stage before selection of suitable parent and production of synthetic varieties. Thirty six sainfoin landraces which have been collected from different parts of Iran were grown in 2000 in a randomized complete block design (RCBD) with 24 replications as a polycross nursery. The resulting polycrosses were sown in 2001 in a triple lattice design. Characters such as fresh forage yield per plot based on unit length, fresh forage yield per plant, and dry forage yield for each cutting stage and for the whole season were measured. Also a yield index for the two first cuttings and forage palatability for the second cutting were determined. Results showed that there was no significant difference between partial blocks within each replication and therefore data was analyzed based on RCBD. High heritability was observed for forage palatability, yield index, and fresh forage yield per plant. So selection can be made to improve forage yield and palatibility in sainfoin. In terms of general combining ability, six landraces for fresh forage yield, six landraces for dry forage yield, nine landraces for yield index, and ten landraces for palatibility showed high estimates. The lanraces having highest amounts of general combining ability for each variable can be used as suitable parents to produce synthetic varieties of sainfoin.

---

In order to manage the rangeland resources, remote sensing data is able to provide a sensible role of different cases in flora community such as biomass. The study area in SefidAb subbasin of the Lar Dam basin is located in central Alborz, where the climatic condition is semihumid and near to moderate. For the assessment of the sattelite data and their capability in estimation of the range production, Landsat-TM data with different bands was used. In this research, the field data was collected using random-systematic method in 20 sampling units of 200 plots. For geographic coordinates of the sampling units and related pixels in digital data, GPS and also existing benchmark data of the nearest points were used. Then correlation between ground data and vegetation index from different band combination was investigated and the reasonble vegetation indices were obtained. Finally, the best models were extracted for this purpose, which showed sensible relation between the field data and vegetation index. Therefor, it is possible to estimate range production using Landsat TM data related to ground control.

---

  Application of meteorological indicators has extensive use in drought monitoring. However, hydrological indicators can also play an effective role in this task. In this research, one of the rare approaches in drought monitoring with hydrological indicators namely Chang method has been applied and assessed for the Tehran basin using daily time step. The results have been compared with the unique meteorological drought index, EDI (effective drought index) and show the capabilities of the hydrological method and its more sensivity to water resources deficit. For instance, application of these procedures for the 1998 to 2000 drought spell in Tehran province revealed that Change method declares 31.1 % of times in very severe drought whereas it is 3.7 in EDI. Because of applying different indicators (e.g. reservoir and ground storage), a combination of both procedures is an ideal approach for drought monitoring in which the water inputs to the system as well as storage and consumptions are considered. The applied methodology makes it Possible to distinguish droughts due to rainfall deficit from the ones, which are resulted from water resources miss management.