Showing 4 results for Irrigation Management
A. Hassanli, A. Sepaskhah,
Volume 4, Issue 2 (7-2000)
Abstract
In this study, seven citrus gardens in different parts of Darab were chosen to evaluate the drip irrigation systems. The evaluation process was based on the Merriam and Keller’s model (1978). Besides the evaluation of drip irrigation systems, the water requirement of citrus was estimated using four models including Blany-Criddle modified by FAO, Hargrive-Samani, Pan Evaporation and Solomon-Kodama model. On the basis of the results obtained by Hargrive-Samani with 1296 mm annual water requirements, a comparison was made between irrigation with existing systems and irrigation under favorable and desired conditions.
The results from field measurements indicate a considerable reduction in the emitter discharges. The low pressure and emitter clogging could be two major reasons for the problem. Low pressure at head control, topography, head losses and also using no filter(s) or unefficient filters are the main reasons for the reduction. In some gardens, overirrigation even up to 2.5 times of water requirement was practiced by using extra emitters and increased irrigation times. Overirrigation causes considerable water losses through deep percolation and in reased overwetting area.
Field measurements indicated a good emission uniformity (EU) for the fields with overirrigation. EU in chosen fields varied from 40 to 91%, AELQ varied from 31 to 82% (poor to good) and PELQ varied from 36 to 82%. This study showed that most farmers are not familiar with plant water requirements. The fields with efficient filtration due to using extra emitters per plant are mainly overirrigated. But fields without any filter of unefficient filters are not irrigated sufficiently. The very high manufacturing variation coefficient of IEM emitters (Cv=0.22), which are widely used in Darab, causes a design emission uniformity of 55%.
M Navabian , A Liaghat ,
Volume 14, Issue 51 (4-2010)
Abstract
Environment pollution is an important problem in the world. In agriculture irrigation, drainage and fertilization activities cause water resource and environmental pollution by effecting on solute, nutrient and sediment transport. Combined methods of water and nutrient management could consider in pollution transport controlling that reducing runoff and deep percolation, providing opportunity for solute infiltration, reducing sediment transport even economic and easy usage. In this research, affect of two different management in irrigation (cutback and continues) and fertilization (solid and fertigation) on nutrient loss was evaluated. Comparing nitrate, phosphor and potassium loss in different management explicate cutback flow with no uniform solid distribution of fertilizer is more useful to prevent nutrient loss. Because of similar results, increasing in fertilizer distribution in furrow length and easy usage between nitrate losses in six managements, show cutback flow with three proceeding solid, fertigation and fertigation (with 1/4, 1/2 and 1/4 ratio) fertilization was recommended replacement of cutback flow with three proceeding solid fertilization.
Zahra Saadati, Nader Pirmoradian, Mojtaba Rezaei,
Volume 17, Issue 64 (9-2013)
Abstract
The modeling of yield response to water is expected to play an increasingly important role in the optimization of crop water productivity (WP) in agriculture. In this study, the CropSyst model was used to simulate two local rice varieties yield response under five irrigation treatments consisting of continuous flooding irrigation and irrigation at 0, 3, 6 and 9 days after the disappearance of water from the soil surface. The experiment was conducted at Rasht region during two growing seasons of 2003 and 2004. The model was calibrated using the first year data and validation of that was done using the second year data set. The result of F test shows that there was not a significant difference between the measured and simulated yield at confidence level of 99%. The relative errors of yield estimation were obtained between -0.81 to 12.58% and -2.4 to 19.42% for Binam and Hasani cultivars in 2003, respectively. These values were 0.83 to 16.4% and -2.82 to 21.27% in 2004, respectively. The results showed that due to the CropSyst model ability in simulating yield of rice under different irrigation regimes, this model can be used to explore management optimum options to improve rice water productivity
P. Shojaei, M. Gheysari, H. Nouri, H. Esmaeili, S. Eslamian,
Volume 23, Issue 3 (12-2019)
Abstract
Creation and conservation of urban parks is challenging in arid environments where daily thermal extremes, water scarcity, air pollution and shortage of natural green spaces are more conspicuous. Water scarcity in the arid regions of Iran is major challenge for water managers. Accurate estimation of urban landscape evapotranspiration is therefore critically important for cities located in naturally dry environments, to appropriately manage irrigation practices. This study investigated two factor-based approaches, Water Use Classifications of Landscape Species (WUCOLS) and Landscape Irrigation Management Program (LIMP), to measure the water demand in a botanic garden. The irrigation water volume applied was compared with the gross water demand for the period from 2011 to 2013. On average, WUCOLS estimated an average annual irrigation need of 1164 mm which is 15% less than the applied value of 1366 mm while the LIMP estimate of 1239 mm was 9% less than the applied value. Comparison of estimated and applied irrigation showed that a water saving of 9% can be made by the LIMP method. The outcomes of this research stressed the need to modify the irrigation requirements based on effective rainfall throughout the year, rather relying on long-term average data.
