Showing 10 results for Micronutrient
S. Vaseghi, M. Afyuni, H. Shariatmadari, M. Mobli,
Volume 7, Issue 3 (10-2003)
Abstract
Excessive application of sewage sludge leads to the accumulation of potentially toxic elements in soils. The objective of this greenhouse study was to examine the DTPA–extractability of Fe, Zn, Cu, Mn, Pb, Cd, Ni, and Co in relation to soil pH and to investigate the concentrations of these metals in corn (Zea mayz). The study was conducted using a factorial experiment in a completely randomized design with three replications. Sewage sludge was applied at 0, 50, 100, and 200 t/ha on four soils [Langaroud (pH= 4.8), Lahijan (pH= 5.7), Rasht (pH= 6.8), and Isfahan (pH= 7.9)]. Application of sewage sludge significantly increased DTPA-extractable Fe, Zn, Cu, Pb, Cd, and Ni in all soils. The increasing effect was in accordance with sludge level. Langaroud soil had the highest and Isfahan soil the lowest levels of DTPA-extractable metals. Application of sewage sludge increased plant growth and metals in the foliage of corn plants. The metal concentration in corn tissues also increased with decreasing soil pH. Overall, the application of sewage sludge as an organic material, particularly in acid soils, may increase availability of heavy metals, which may, in turn, result in soil pollution. Therefore, addition of sewage sludge to soils should be managed on the basis of the changes in soil heavy metal concentration.
M. A. Nazari, H. Shariatmadari, M. Afyuni, M. Mobli, Sh. Rahili,
Volume 10, Issue 3 (10-2006)
Abstract
Sewage sludge and effluents, as cheap sources of irrigation water and fertilizer, can supply plants with water and nutrients however, contamination of these sources with heavy metals and the possibility of human food chain contamination using these sources should be considered. In this research, the effects of industrial sewage sludge and effluents on concentration of some nurtients, heavy metals and sodium and dry matter yield of wheat (Triticum aestivum), barley (Hordeum vulgare) and corn (Zea mays) were investigated. The experiment was carried out in a greenhouse using a complete randomized design with four replication. The treatments comprised well water, well water + sewage sludge(50 tons/ha), and three industrial effluents from Iran Polyacryl factory including the cooling tower, the over flow and the factory outlet effluents. Chemical analysis showed the following results: The concentration of the elements in the sludge and the effluents were below the critical contaminating levels. The application of the treatments did not supply enough nitrogen for corn the cooling tower effluent could not supply enough nitrogen for wheat and barley all the treatments supplied enough P for wheat. None of the treatments could supply enough P for corn. The cooling tower, over flow and the factory outlet effluents could not supply enough P for barley, the micronutrient and heavy metal concentrations in the plant tissues using the effluents and the sewage sludge were higher than those for well water the dry matter yield of plants’roots and shoots was highest using well water + sludge and in comparison with the well water, effluents could increase the shoot dry matter yield.
M Babaeian, M Haydari, A Ghanbari,
Volume 12, Issue 46 (1-2009)
Abstract
In order to study the effects of foliar micronutrient application under water stress at three stages of growth on proline and carbohydrate concentrations, grain yield and yield components of sunflower (Alster cultivar), a field experiment in split plot design with three replications was conducted in 2007. Alster cultivar was considered under water stress at three stages of growth (heading, flowering and grain filling) as main plot and seven micronutrient treatments, Fe, Zn, Mn, Fe+Zn, Fe+Mn, Zn+Mn and Fe+Zn+Mn, as sub plots. Results showed, water stress at three stages of growth significantly decreased grain yield, biological yield, 1000 weight seeds, cap diameter and cap weight of sunflower (Alster cultivar). The impact of water stress was more pronounced when applied at grain filling. Use of foliar micronutrient increased grain yield in water stress. On the other hand, use of Mn foliar application had the highest positive effect on yield components and grain yield. Free proline and total soluble carbohydrate concentration were increased under water stress at all of the three stages of growth. The highest concentration of these two components was found on the flowering stage. Foliar micronutrient also increased accumulation of the two components.
H. Kheirabad, A. H. Khoshgoftarmanesh, Z. Khanmohamadi,
Volume 16, Issue 62 (3-2013)
Abstract
Due to soil and plant zinc (Zn) deficiency and its effect on reducing yield and quality of agricultural products, application of Zn fertilizers has been intensified in recent years. To achieve optimum fertilizer management, knowledge of factors affecting Zn availability in soil and its uptake by plant is required. Therefore, this study was carried out to investigate the effect of certain soil physiochemical properties on Zn availability in soil and its uptake by corn. The experiment was laid out in a completely randomized design with factorial combination and three replicates in the research greenhouse of Isfahan University of Technology, in winter 2009. In this greenhouse experiment, 11 soil series were exposed to two Zn levels (0 and 15 mg Zn kg−1 in the form of zinc sulfate). The results indicated that Zn application significantly increased the dry matter weight and shoot and root Zn concentration of corn, although the magnitude of this increase varied depending on the soil type. There was no significant correlation between the DTPA-extractable Zn and the uptake of this nutrient element by corn. There was a negative significant correlation (P < 0.05) between the equivalent calcium carbonate content and available P with the DTPA-extractable Zn. A significant linear relationship (R2 = 0.31) was found between the buffer capacity of soil for Zn and clay content. According to the results obtained from the stepwise regression analysis, the DTPA-extractable Zn and buffer capacity of soil for Zn were not correlated with other measured soil properties.
B. Daneshbakhsh, A. H Khoshgoftarmanesh, H. Shariatmadari,
Volume 17, Issue 65 (12-2013)
Abstract
This research was carried out in a hydroponic culture to investigate the effect of Zn nutrition on phytosiderophore release by roots of three bread wheat genotypes (Triticum aestivum L. cvs. Rushan, Kavir, and Cross) differing in Zn-efficiency. The wheat seeds were germinated in sterile sand and two weeks later the plants were transferred to nutrient solution containing different Zn levels. Phytosiderophore released by plant roots was collected ten days after applying Zn treatments and measured using resin-Cu-mobilization test. A month after their transfer to nutrient solution, the plants were harvested and Fe and Zn concentrations in root and shoot were measured, and total amounts (uptake) of these nutrients were determined. Zinc addition increased concentration and total amount of Fe and Zn in shoot in Rushan genotype, while it had no significant effect on concentration and total amount of Zn in shoot and root of Kavir and Spring Back-Cross-Rushan genotypes. Addition of Zn to the nutrient solution decreased concentration and total amount of Fe in shoot of all wheat genotypes. On the other hand, Zn nutrition increased root Zn concentration in Rushan and Kavir genotypes, while it resulted in significant decrease of root Zn concentration in Back-Cross-Rushan genotype. Effect of Zn nutrition on the amount of phytosiderophore release by roots of wheat genotypes was different. Zinc nutrition resulted in an increase of phytosiderophore release by roots of Rushan, while it had no significant effect on phytosiderophore release in other wheat genotypes.
V. Dorostkar, M. Yousefifard, Z. Jajarmi,
Volume 23, Issue 2 (9-2019)
Abstract
A significant amount of the oil meal is produced annually in the oil industry. Oil meal addition into the soil can improve the soil organic matter and micronutrients concentration. This study was conducted to investigate the effect of olive, sesame and black cumin meal (0, 2 and 5 g 100g-1 soil) on the soil Cu, Zn and Fe concentration in saline and non-saline soils by a greenhouse experiment. The soil basal respiration, organic carbon, carbohydrate and DTPA extractable Cu, Zn and Fe concentration were measured after 60 days of incubation. The results showed that the greatest organic carbon and carbohydrate content were observed in olive and black cumin treatments and the lowest was observed in the sesame treatment. Using oil meal in the soil improved the micronutrient concentration, as compared to the control treatment. Sesame meal had the greatest effect on the DTPA extractable Cu and Zn concentration increment. The DTPA extractable Fe concentration was the highest in the sesame treatment and the lowest in the black cumin one. In addition, salinity decreased the DTPA extractable Fe and Zn concentration, as compared to the non-saline soil. As the conclusion, oil meal incorporation in to the soil improved the soil organic carbon and micronutrient concentration. However, their effect depends on the meal quality and soil salinity.
R. Vahedi, M. H. Rasoili-Sadaghiani,
Volume 23, Issue 4 (2-2020)
Abstract
Synergistic relationships between mycorrhizal fungi (AMF) and organic compounds affect the mobility of the micronutrient elements in the rhizosphere and improve their bioavailability. In order to evaluate the effect of biochar and pruning waste compost of apple and grape trees, as well as AMF, on micronutrient bioavailability in calcareous soil at the wheat rhizosphere, an experiment was carried out in a completely randomized design under greenhouse conditions in a rhizobox study. Some factors including the organic sourses (pruning waste biochar, pruning waste compost and control), microbial inoculation (AMF and no inoculation) were considered. At the end of the growth period, Organic matter (OM) content and bioavailability of micronutrients including iron (Fe), Zinc (Zn), Copper (Cu) and Manganese (Mn) in the rhizosphere and their uptake by wheat plant were determined. The results indicated that OM, Fe, Zn, Mn and Cu were significantly increased in the rhizosphere soil under the influence of organic sources and mycorrhizal inoculation. Furthermore, biochar application in the mycorrhizal tratment resulted in 74.73% and 19.28% increase in Fe and Mn, as compared to non-inoculated conditions, in rhizosphere. The presence of mycorrhizal fungi increased the bioavailability of 94.66% and 29.54% Zn and Cu in the compost treatment, as compared to non-inoculated ones. Application of organic sources and mycorrhizal inoculation increased the micronutrient uptake and plant dry weight.
A. Abdollahi, M. Norouzi Masir, M. Taghavi, A. Moezzi,
Volume 24, Issue 2 (7-2020)
Abstract
Nowadays, one of the ways to confront with the micronutrients deficiency is application of Nano materials to increase the availability of elements such as zinc for plants. Therefore, this study was conducted to investigate the effect of functionalized iron oxide nanoparticles and zinc sulfate chemical fertilizer on the zinc chemical forms in soil solution phase and its correlation with zinc concentrations and uptake in wheat. This study was carried out in a completely randomized design with three replications. Treatment consisted of functionalized iron oxide nanoparticles of Hydroxyl (OH), Carboxyl (COOH) and Amine (NH2), each at three levels (100, 200 and 300 mg.kg-1), ZnSO4 (40 kg.ha-1) and Control (without using iron oxide nanoparticles). At the end of the cultivation period, soil chemical properties such as pH, soil available zinc and dissolved organic carbon and concentrations and the uptake of zinc in plant were measured. The results showed that pH, available zinc and dissolved organic carbon content of soil solution were significantly affected by the treatments. The results obtained from the Visual MINTEQ Geochemical model showed that the highest amount of the free form of zinc (Zn2+) was obtained at the level of 300 mg.kg-1 of carboxyl iron oxide nanoparticles. Also, the experimental treatments significantly influenced the concentration of Zn-DOM species. The positive and significant correlation between Zn+2 and Zn- DOC species with the concentration and total Zn uptake of wheat indicated that these pools of Zn could be liable species in soil. The results of this study, therefore, showed that the application of functionalized iron oxide nanoparticles could help to improve soil conditions in order to increase the zinc availability for plants.
S. Rezapour, P. Najafi, B. Atashpaz,
Volume 24, Issue 2 (7-2020)
Abstract
In the present study, six soil profiles belonging to five soil types were dug, described and sampled. Soil samples were analyzed for the determination of different physicochemical properties and total and DTPA-extractable iron (Fe), zinc (Zn), copper (Cu), manganese (Mn), lead (Pb), and cadmium (Cd). Considering the variability of pH and calcium carbonate equivalent, the examined soils were alkaline and calcareous. A considerable change in the values of the DTPA fraction of Fe (1.4-25.8 mg/kg), Zn (0.01-3.3 mg/kg), Cu (0.32- 6.2 mg/kg), Mn (1-11.8 mg/kg), Cd (0.05- 0.12 mg/kg) and Pb (0.22- 2.56 mg/kg) as well as in the total fraction of Fe (10.6-20.6 g/kg), Zn (35- 67.5 mg/kg), Cu (9 to 26.40 mg/kg), Mn (262- 588.8 mg/kg), Cd (0.5- 1.75 mg/kg) and Pb (17- 31.3 mg/kg) was observed in different soils. The content and pattern of both DTPA and total fraction of the metal were varied among the soil types, which could be related to several processes such as the diversity of weathering rate, geomorphologic condition, soil formation process, different physicochemical properties of soils, and the inputs of different agrochemical compounds. The concentration of both DTPA and total fraction of the metal were in the acceptable maximum level in the majority of the soil samples.
S. Shakeri, A. Azadi, M. Saffari,
Volume 24, Issue 4 (2-2021)
Abstract
Determining the relative distribution of each chemical form of the elements and their relationship with the physical, chemical, and clay mineralogical properties of soils can help researchers to achieve the sustainable agricultural management. The present study was conducted to evaluate the chemical forms of four micronutrients (Zn, Cu, Fe and Mn) in some surface and subsurface soils of Kohgiluyeh and Boyer Ahmad province and their relationship with the physical, chemical and mineralogical properties of the soils. The results showed that the exchangeable and sorbed chemical forms of the studied elements were very low and negligible, but the residual, carbonate, and organic forms had the highest to lowest values of the chemical forms of these elements, respectively. Examination of the correlation of the chemical forms of these elements with soil properties showed the effective correlation of organic carbon values with the Zn chemical forms; also, there was a correlation between clay, silt, cation exchange capacity and calcium carbonate and the chemical forms of Cu, Fe and Mn. The correlation between the quantities of clay minerals and the chemical forms of these elements showed that the amounts of different forms of the studied elements were directly related to 2:1 clay silicate minerals (especially vermiculite). Evaluation of Fe and Mn chemical forms also showed that the amounts of these elements were higher in the soils with developed profiles (Alfisol and Mollisol), the wetter climate and zeric moisture regime rather than in soils with non-developed profiles (Entisols and Inceptisols) and a drier climate and a ustic moisture regime. In general, the results showed that variations of soil forming factors such as climate (as well as the total amount of each micronutrients), could be effective on the chemical forms of micronutrients (especially on Mn and Fe); these can be effective in the management of weakly to highly-developed soils orders.
