Showing 8 results for Oil Yield
M.r. Khajehpour, F. Seyedi,
Volume 4, Issue 2 (7-2000)
Abstract
Obtaining high seed and oil yields of sunflower requires coincidence of vegetative and reproductive stages of growth of the plant with suitable environmental conditions via selecting appropriate planting date. Since the suitable date of planting for sunflower cultivars under Isfahan environmental conditions was not determined, this experiment was conducted in 1996 at the Agricultural Research Station, Isfahan University of Technology. In this study, five dates of planting (April 27, May 12 and 27 and June 12 and 29) and three open pollinated sunflower cultivars (Record, Vnimik 8931 and Armavirec) were evaluated using a randomized complete block design with split-plot layout in three replications. Date of planting was considered as the main plot and cultivars were randomized in the sub-plots.
Number of seeds per head (SH), l000-seed weight (SW), seed oil percent (SOP) and, consequently, yields of oil (OY) and seed (SY) were significantly reduced as planting was delayed. Reduction in these traits were considered to be related to the coincidence of vegetative and reproductive growth stages with higher temperatures prevailing at later plantings. Vnimik 8931 had higher SH and SW, and thus produced higher SY. This cultivar had lower SOP than Record, but produced higher OY than Record due to its higher SY. Armavirec was ranked the least for the measured traits, except for its SH that was slightly higher than that of Record. SH was the most contributing trait to the increase in SY, and SY was the most determining trait for the increase in OY. Date of planting by cultivar interactions for SH, SY and OY were significant. Nevertheless, the highest amount of the measured traits were obtained with Vnimik 8931 at the first planting date.
A. Mojiri, A. Arzani,
Volume 7, Issue 2 (7-2003)
Abstract
In order to study the effects of different levels of nitrogen fertilizer and plant density on grain yield and its components in sunflower, an experiment was conducted using 'Record' cultivar at the Research Farm of College of Agriculture, Isfahan University of Technology in 1996. Four levels of nitrogen (0, 75, 150 and 225 kg/ha) and four plant densities (65000, 75000, 85000 and 95000 plants/ha) were used in a split plot arranged in a randomized complete block design with three replications. Developmental stages, plant height, stem diameter, head diameter, number of head per m2, grain yield, biological yield, harvest index, 1000-grain weight, number of grains per head, grain oil percentage, oil yield and grain protein content were measured.
The results indicated that N fertilizer caused an extension of the growth period and means of days to physiological maturity. It also increased plant height, stem diameter and head diameter. While increasing plant density had an incremental effect on plant height, it negatively affected stem diameter and head diameter. N fertilizer up to 150 kg/ha increased the grain yield and biological yield, whereas higher levels of N fertilizer decreased both. Plant density of 85000 plants per hectare was observed as a suitable plant density, whereas the higher plant density had a negative effect on grain yield. N fertilizer via increasing the number of grains per head, and plant density via increasing the number of heads per unit area and also decreasing the number of grains per head influenced the grain yield. One-thousand grain weight was not affected by neither N fertilizer nor plant density. Considering the superiority of 150 kg/ha of N fertilizer and plant density of 85000 plants/ha for grain yield and oil yield, it appears that they could be recommended for producing desirable yield in the regions similar to the study region.
F A. Frouzandeh Shahraky, M. R. Khajehpour,
Volume 9, Issue 4 (1-2006)
Abstract
Under irrigation and in double-cropping system, a large amount of plant residue remains after harvest that along with the limited time for residue decomposition and complete seedbed preparation, necessitates reduced tillage and special residue management. In the present study, the effects of various seedbed preparation methods on vegetative growth, yield components and seed and oil yields of sunflower (Euroflor hybrid) were studied in a barley-sunflower cropping system during 2001 at the Agricultural Research Station, Isfahan University of Technology. Three residue management treatments (standing, partly removed and burned) along with five tillage systems (moldboard + disk chisel + disk disk moldboard and furrower as the minimum tillage) were laid out in a split-block design with three replications. Burning residue treatment significantly increased plant dry weight at various developmental stages and also head diameter. Number of seeds per head, 1000 seed weight, harvest index, and oil yield were non-significantly higher in the burned residue treatment. Seed yield was significantly higher in the burned and partly removed residue treatments. Moldboard + disk and chisel + disk treatments significantly produced higher plant dry weight at various developmental stages, head diameter and seed yield. Number of seeds per head, 1000 seed weight, harvest index, and oil yield were non-significantly higher in these treatments. Minimum tillage ranked the lowest for these traits. The results of this experiment indicate that chisel + disk treatment with the partly removed residues might be an appropriate seedbed preparation method in a barley-sunflower double planting under conditions similar to this experiment.
Gh. Saeidi,
Volume 11, Issue 1 (4-2007)
Abstract
Sunflower (Helianthus annuus L.) can have an important role in vegetable oil production. Also, appropriate soil fertility is necessary to obtaine higher seed yield and quality of the crop. This experiment was conducted to investigate the effect of fertilizer treatments of macro and micronutrients on seed yield and other agronomic traits in sunflower. The effects of thirteen fertilizer treatemts (as main factor) were investigated on agronomoic traits of two hybrid cultivars, "HiSun33" and "Euroflor" (as sub factor) in a randomized complete block design with three replications. The results showed that there was significant interaction between fertilizer treatments and cultivars for most of the traits and the effects of fertilizer treatments were dependent on the cultivar. Almost all of the fertilizer treatments of N, P, K, Fe, Zn and Mn either significantly or non-significantly decreased the means of head diameter, 1000-seed weight, seed yield/plant, seed yield and oil yield in Euroflor cultivar however, in HiSun33 cultivar, each of N, P, and K fertilizers had no significant effect on seed yield. Application of Zn and Mn fertilizer in soil or spraying them on plants had no significant effect on seed yield and yield components in HiSun33 cultivar however, application of Fe feritilizer (Sequestrene) significantly increased the seed yield of this cultivar and had no significant effect on its seed oil. In HiSun33, seed yield and oil content for treatments of control, NPK and NPK+Fe were 4946, 5155 and 7090 kg/ha and 40.72, 43.10 and 43.07 %, respectively. The effects of fertilizer treatments on oil concentration of seed were not significant, thus the variation of oil yield was due to the seed yield. The correlation coefficients and regression analysis showed that seed weight and head diameter were most important seed yield components,. In general, it seems that in a soil conditions like that of this experiment, Fe fertilizer can increase seed and oil yield in HiSun33 cultivar.
F. Heidari, S. Zehtab-Salmasi, A. Javanshir, H. Aliari, M. R. Dadpour,
Volume 12, Issue 45 (10-2008)
Abstract
In order to examine the effects of plant density on the morohological traits, yield and essential oil of peppermint, an experiment was conduced in Agricultural College of Tabriz University during 2005 and 2006. The treatments included four plant density levels ( 8,12 ,16,20 plants.m-2) with three replications. The treatments were based on a split plot design in time and result analysis of compound variance was done during two years. The two years’ results of the compound variance showed that the plant density affected the fresh yield, dry yield, the bush essential oil percentage and the essential oil yield, but it had no effect on the bush height and the leaf’s essential oil percentage. In the second year, the maximum fresh yield, dry yield, bush height, the bush essential oil percentage, and the essential oil yield were obtained. In the second year, the maximum essential oil yield in the density of 20 plant/m2 was 21.15 li.ha-1.
S.m Ziaee, M Kafi, J Shabahang, H Khazaee, M Soleimani,
Volume 13, Issue 47 (4-2009)
Abstract
Production of halophytes using saline waters and soils, and feeding livestock with them, is one of the most sustainable ways of desert ecosystems conservation and food production for people living in these areas. A field experiment was conducted at Salinity Research Station, Ferdowsi University of Mashhad, in 2007 to evaluate the effect of planting density and harvesting time on oil and protein yield of Kochia. Treatments were arranged as a split-plot based on a randomized complete block design with three replications. Planting density (10, 20, 30 and 40 plants m-2) as assigned to main plots and two dates of harvesting (after 50% flowering and full maturity) constituted the sub-plots. Plant density had a significant effect on grain yield, mean seed weight, harvest index, oil yield, oil content and protein yield at maturity stage. Forage and protein yield were also affected by plant density at the harvest date of 50% flowering. Total dry matter, protein yield and percentage differed significantly between the two harvest dates. The greatest grain yield (2590 kg ha-1) and oil yield (357.7 kg ha-1) were achieved from 20 plants m-2, whereas those from 10 plants m-2 were minimal. Maximum protein yield (3390 Kg ha-1) was obtained from the planting density of 30 plants m-2 at 50% flowering stage. Based on the results of this study, the best qualitative yields for Kochia could be obtained from a planting density of 30 plants m-2 after 50% flowering but one may recommend planting Kochia at 20 plants m-2 for a high grain or oil production.
Gh. Omidi Ardali , M. J. Bahrani,
Volume 15, Issue 55 (4-2011)
Abstract
The optimum levels of soil moisture and nitrogen are important to obtain higher yields. To investigate the effects of water stress, nitrogen levels and application times on yield and yield components of sunflower (Helianthus annuus L.), the cultivar Euroflor at different growth stages, a two year study (2006-007) was conducted at Research Fields of College of Agriculture, Shiraz University (Badjgah) using a split factorial design with four replications. Treatments were water stress at three levels, (non-stress and stress at flowering and seed formation) as main plot and three N levels (0, 70, 140 kg ha-1) and N application times (split application at planting and stem elongation, planting and heading, and stem elongation and heading) as subplot. Number of seed per head, 1000-seed weight, seed yield, Oil yield and HI were measured. Results showed that the effects of water stress and N rates on yield and yield components were significant, but the effects of N application times and interaction between water stress, nitrogen rates and application times were insignificant. Overall, the crop showed more sensitivity to drought stress at flowering time, and 70 kg N ha-1 is recommended for the region.
F. Alizadeh, A. H. Nasrolahi, M. Saeedinia, M. Sharifipour,
Volume 25, Issue 1 (5-2021)
Abstract
In areas with high rainfall distribution, proper irrigation management, including complementary irrigation, is one of the effective strategies to increase crop production. In order to investigate the effect of supplementary irrigation in different growth stages on the yield and water productivity of Autumn rapeseed, an experiment in the form of a complete randomized block design with five irrigation management treatments including rainfed (I1), single irrigation at flowering stage (I2), single Irrigation at pod filling stage (I3), two irrigation at pod filling stage and flowering (I4), three irrigation at flowering, and pod filling and grain Filling stages (I5) was carried out at Lorestan University Research Field. Results showed that there was a significant difference between the effects of different irrigation treatments at 1% level. The lowest grain yield, biological yield and oil yield were obtained in I1 treatment with 44.62%, 50.95% and 53.58% decrease, as compared to I5 treatment. The results also showed that by applying irrigation at pod filling stage, grain yield and oil yield were increased by 13.22% and 20.23%, as compared to I1 treatment. The highest total productivity for the grain yield and oil yield was obtained in I5 treatment with 0.252 and 0.073 kg / m3. In general, due to the fact that drought stress in rapeseed calving stages reduces yield, the higher the number of irrigations in rapeseed calving stages, the more the yield.
