Search published articles


Showing 2 results for Scour Index

Y. Neamah Abdulhasan, A. Khoshfetrat,
Volume 28, Issue 3 (10-2024)
Abstract

Piano key weirs are a type of non-linear weir that have a higher discharge coefficient than similar linear weirs. These hydraulic structures have a lightweight foundation and a simple structure is designed and installed on dams and drainage channels. Due to the high efficiency of these weirs, the investigation of downstream scour and ways to reduce it has been the focus of engineers in recent years. In the present study, a trapezoidal type C piano key weir, three discharges, and three tailwater depths were used. Two obstacles with heights of 0.02 and 0.04 meters were also used at the end of the weir exit keys. The results showed that the presence of an obstacle reduces scour at the toe of the weir. The amount of reduction in scour at the toe of the weir was greater in the weir with a larger obstacle height than in the weir with a smaller obstacle height, and in both cases was less than in the simple weir. The presence of an obstacle reduces the maximum depth of scour and moves the distance of the maximum depth of scour away from the toe of the weir. In the weir with obstacle heights of 0.02 and 0.04 meters, compared to the weir without an obstacle, the amount of maximum scour depth is approximately 16.4% and 26.9% less, and the distance of the maximum scour depth is approximately 8.7% and 19.1% more than the weir without an obstacle. The scour index in weirs with obstacles is less than in weirs without obstacles, which can reduce the risk of weir overturning. The lowest value of the scour index was observed in the weir with an obstacle height of 0.04 meters, which is approximately 41.2% less than the weir without an obstacle.

L. Babakhah, A. Khoshfetrat, E. Delavari,
Volume 29, Issue 1 (4-2025)
Abstract

Piano key weirs are a new form of labyrinth weirs and exhibit nonlinear characteristics. Due to their high efficiency regarding flow capacity, it is crucial to investigate local scour and identify solutions to mitigate it. Local scour was examined downstream of a trapezoidal piano key weir type B for the first time in this study. The weir was installed 5.50 m from the start of the channel and has a height of 0.20 m, featuring three cycles (three outlet keys, two inlet keys, and two inlet half keys). Three tailwater depths and three different flow rates were also utilized. The maximum scour depth increases with a higher densimetric Froude number and flow rate while decreasing with tailwater depth. The range of the dimensionless parameter for the densimetric Froude number in this study varies between 1 and 2. Additionally, sand and gravel were employed as two types of bed materials. As the diameter of the bed material increases, the maximum scour depth decreases. The scour index for gravel bed material is significantly lower than that for sand material, indicating that the risk of weir overturning is much lower in gravel bed material.


Page 1 from 1     

© 2025 CC BY-NC 4.0 | Journal of Water and Soil Science

Designed & Developed by: Yektaweb