JWSS - Journal of Water and Soil Science

The Khanmirza plain is one of Iran’s fertile plains that is located in Chaharmahal Bakhtiari province. Agriculture in the area is very prosperous, but the lack of rain and over-harvesting from consumption wells has led to a reduction in groundwater levels, even causing land subsidence. Moreover, the high usage of chemical manures, especially nitrate manures, has increased the number of solutes and chemical materials in the groundwater. Thus, for this plain, making artificial ponds is important to modify the storage of the aquifer. In this study, to define the optimum locations of the artificial ponds, the effect of 12 factors was considered. The analytic hierarchy process (AHP) method was used to introduce the weight of each parameter in comparison to other factors. Afterward, the spatial priority of all factors was derived using the Geographic Information System (GIS) technique. The produced GIS layers were laid on each other and the optimum locations were obtained. Agricultural drainage was an effective index for recharge purposes. The results of the study demonstrated that groundwater level decline got the maximum weight (40%), while the land slope had the minimum weight, since the vicinity to available floodways was considered as an independent criterion. The results also showed that regions with a total area of 18 km² in north and north-west of the Khanmirza plain could be the optimum and most suitable places for artificial ponds construction.

This study aimed to optimize the site selection of artificial groundwater recharge zones in the Yazd-Ardakan watershed (covering an area of 116,765 hectares) to address challenges such as water scarcity, severe groundwater depletion, and annual rainfall below 100 mm. The research integrated Geographic Information Systems (GIS) and Multi-Criteria Decision-Making (MCDM) methods. Seventeen influential criteria, including elevation, slope, land use, geology, soil type, climate, distance from faults, and isothermal lines were analyzed using ArcGIS 10.5. Criteria weighting was performed using the Best-Worst Method (BWM), and layer integration was achieved through the Weighted Linear Combination (WLC) approach. Results indicated that slope (weight: 0.203), elevation (correlation >0.75), and land use (correlation ≈0.5) had the highest impact on zone suitability, while climate and isothermal lines were less influential. The final suitability map (900×900 m resolution) revealed that central and southern plain areas with slopes <2%, permeable alluvial formations, flat topography, and optimal distance from faults were prioritized for artificial recharge. Sensitivity analysis identified eight key criteria (correlation >0.5), and by eliminating 53% of non-essential parameters, an efficient framework for sustainable water resource management was established. This study not only contributes to raising groundwater levels, improving soil fertility, and preserving local ecosystems but also offers a practical solution for water crisis management in arid regions.