JWSS - Journal of Water and Soil Science

---

A suitable instrument capable of inserting mulch into soil is needed to improve soil water holding capacity. The goal of this research is to design and manufacture an instrument with a blade and mechanism that can insert rice mulch into the soil. All the parameters in sub-soiling operation were taken into account, and the technique presented can be recommended as a special method of injecting rice husk. The instrument designed was easy to use on a tractor. Sub-soiling operation and husk injection were carried out satisfactorily using various amounts of husk and at different soil depths. This method was added to the conservation chart presented by Morgan as an integrated technique.

---

The present research was intended to alleviate the problems and costs of deep tilling in sugarcane production in Mian-Ab sugarcane farms located in Khuzestan province, Iran. The main objective was to investigate the feasibility of subsoiling operations with bentleg subsoiler (BLS) equipped with shallow tines, a combination expected to increase the critical depth resulting in less power consumption and improved soil physical conditions. Six treatments arranged in a completely randomized block design were used to measure the draft force (except for the bulldozer mounted rippers), disturbed soil cross-sectional area and penetration resistance. The treatments included (1) subsoiling with rippers mounted on bulldozer, (2) BLS without attachment, (3), and (4) BLS equipped with single tine at working depths of ½ and ⅓ of target depth, (5) and (6) BLS equipped with two tines at ½ and ⅓ target depth. The experiment was replicated three times. The results indicated that BLS without attachment had the highest draft requirement as compared with other BLS treatments with shallow tines. In general, tine attachment resulted in less draft mainly due to displacement of critical depth to lower soil zones. Increasing the number and depth of shallow tines resulted in less draft force. The BLS equipped with two tines working at ½ target depth exhibited minimum drawbar power. The inclusion of shallow tines resulted in 21% reduction in drawbar power requirement as compared to BLS without tine attachment. The cross-sectional area of the soil tilled by ripper was minimum. Furthermore, the tilled area was not uniform and subsequent subsoiling operations were needed. The average soil cross-sectional area per unit width was improved by BLS treatments by a factor of 2.3 as compared with that of ripper. The highest cone index was obtained in plots tilled by ripper the BLS reduced this index in a significant manner. The soil worked with subsoiler equipped with tines exhibited the least resistance. The range of wheel slippage for BLS treatments was 12-16% which lies in the upper end of the recommended range for optimum traction efficiency. The proposed idea proved prominent in subsoiling fine textured compact soils.

---

efficiency was investigated during a 2-year period (2009-2010) in a silty clay loam soil in Tajarak Research Station (Kaboudarahang Township), Hamedan. The experimental design was a strip-plot within a randomized complete blocks design. The horizontal band, the irrigation water rate after flowering, included full and deficit irrigation (100% and 75% potato water requirement) and the vertical band, kind of inter-planting row tillage including 1- subsoiling to 30-35 cm soil depth, 2- chiseling to 20-25 cm soil depth, 3- sweeping to 5 cm soil depth and 4- no-till. During the growing season, soil mechanical resistance (cone index) in two stages and water infiltration into the soil were measured. At the end of the growth season (harvesting time), potato yield quantity and quality were measured. Result showed that the effect of inter-row tillage on soil mechanical resistance was significant. Subsoiling and chiseling had lower soil mechanical resistance and higher water permeability between treatments, respectively. The effect of inter-row tillage on potato yield was significant so subsoiling and chiseling had a higher potato yield between treatments, respectively. The effect of irrigation water rate on potato yield was not significant. The effect of inter-row tillage on water use efficiency wasn’t significant.