Search published articles


Showing 10 results for Yield Components.

A. Rezaizad, B. Yazdi Samadi, M.r. Ahmadi, H. Zeinali,
Volume 5, Issue 3 (10-2001)
Abstract

To determine the relationships between yield and its components, and to find the direct and indirect effects of yield-related traits on soybean yield, 240 genotypes were grown in the Research Station, College of Agriculture, Karaj, Iran, in 1997-98 using an augmented design. The study of correlation analysis showed that number of seeds per plant and seed yield per plant had the highest significant correlation coefficient (r=0.92). Other significant correlation coefficients were found between biomass per plant and yield (r=0.86) and between number of pods per plant and yield (r=0.67). Results of stepwise regression analysis revealed that number of seeds per plant, seed weight, and number of seeds per pod were the three major traits affecting seed yield in soybean. However, path analysis showed that only two of the three above-mentioned traits, namely, number of seeds per plant and seed weight, are quite important for soybean selection programs. Stepwise regression analysis was used again, omitting number of seeds per plant, which showed that number of pods per plant, seed weight, plant height and number of days to 90% maturity, are important contributors to yield. Path analysis, this time, revealed that the correlation effects to plant height and number of days to 90% maturity on yield is due to the indirect effects exerted through other traits. It is concluded that three traits, namely, number of seeds per plant, seed weight and number of pods per plant have notable effects on soybean seed yield.
M. R. Khajehpour, A. R. Bagherian Naeni,
Volume 5, Issue 4 (1-2002)
Abstract

It is believed that various types of field bean, including pinto, white and red, differ in adaptability to high temperatures and may, thus, differ in response to delay in planting. In order to evaluate this response, an experiment was conducted during 1996 at the Agricultural Research Station, Isfahan University of Technology, using a randomized complete block design with split-plot layout. Main plots consisted of four planting dates (April 28, May 13 and 28 and June 13) and sub-plots included four genotypes of common bean (red bean, c.v. Naz pinto beans, experimental lines 11816 and 16157 and a white bean, experimental line 11805).

 Number of branches per plant, number of pods per branch and per unit area, number of seeds per pod of main stem and branch, number of seeds per main stem, per branch and per unit area, 100-seed weight and seed yield significantly reduced, while harvest index significantly increased by delay in planting and consequent increases in temperature and reduction in time for growth. The lower harvest index obtained with early planting was the result of the lower efficiency of the produced vegetative growth due to the coincidence of seed filling period with high temperatures. Pinto bean line 11816 ranked the highest for number of branches per plant and harvest index among the genotypes evaluated and produced the highest seed yield (3030 kg ha-1). Although red bean Naz ranked the highest for number of pods and seed per main stem and per unit area, it had the lowest harvest index and 100-seed weight and, consequently, produced the least seed yield (2254 kg ha-1). The results obtained indicate that delay in planting adversely affects bean seed yield. Pinto bean line 11816 may have higher yield potential among the genotypes studied at all planting dates under conditions similar to the present experiment. No specific relationship was observed between apparent seed characteristics and plant tolerance to heat.


Z. Abbasi, G. Saeidi, A. F. Mirlohi,
Volume 7, Issue 1 (4-2003)
Abstract

Flax (Linum usitatissimum L.), an oilseed crop, is widely adapted and grown in many regions of the world. Oil from regular flaxseed is used as an industrial drying oil because of the high level of linolenic acid (>50 %). However, the oils from new mutant genotypes of flax with a very low linolenic acid concentration (<2 %) are edible. Yellow seed colour can be used as a visual marker to distinguish edible-oil genotypes of flax from those of industrial type that are usually brown-seeded. In this study, different lines of flax with two seed colours (yellow and brown) in combination with two levels of linolenic acid (high and low) were evaluated in a randomized complete block design for agronomic traits, especially seed yield and its components. The results indicated that lines with high linolenic acid concentration had significantly higher seed yield than those with low linolenic acid. However, other characteristics including those of seed yield components were not siginficantly affected by linolenic acid concentration. Seed colour had a significant effect on number of seedling/m2, basal branches, capsules per plant and seed yield per plant. Although seedling emergence was lower in yellow-seeded lines, they had more basal branches, capsules per plant and seed yield per plant. Higher seed yield per plant in yellow-seeded lines can be attributed to higher number of capsules per plant as a result of lower seedling emergence and plant density. Seed yield was not significantly different between brown and yellow-seeded lines. Thus, the effect of lower plant density in yellow-seeded lines was compensated by their higher basal branches and number of capsules per plant.
G. Saeidi,
Volume 7, Issue 3 (10-2003)
Abstract

In order to investigate agronomic traits and yield potential of edible-oil flax (Linum usitatissimum L.) as a second crop in Isfahan region, different genotypes were evaluated in separate experiments in early spring (April, 7) and summer (July, 16) planting dates, using a Randomized Complete Block Design with three replications. The experiments were conducted in agricultural research farm, Isfahan University of Technology in the year 2000. The results showed that summer planting considerably and significantly reduced number of seedlings per unit area, days to 50% flowering, and seed yield. However, maturity of the plants was delayed because of summer planting. According to overall average obtained for genotypes, seed yield was 1472 and 213 kg/ha in the first and second planting dates, respectively. There was a significant difference between genotypes for number of seedlings per unit area, days to 50% flowering and maturity in both planting dates. However, genotypes were significantly different for seed yield in the first planting date. Summer planting also non-significantly reduced yield/plant, capsules/plant and 100-seed weight and increased seeds/capsule. The differences between genotypes for these traits in both planting dates and for seeds/capsule in the first planting date were significant. The significant interaction between genotypes and planting dates on seeds/capsule and 100-seed weight was because of increasing or decreasing levels of these traits in some genotypes when planting date was delayed. The results of regression analysis, correlation coefficients and path analysis showed that in both planting dates, capsules/plant followed by seeds/capsule and 100-seed weight were the major components of yield/plant. Capsules/plant had the most (approximately 80%) contribution in variation of yield/plant in both planting dates. The number of plants per unit area affected yield/plant via indirect and negative effect of capsules/plant.
I. Zarrinabadi, P. Ehsanzadeh,
Volume 7, Issue 4 (1-2004)
Abstract

Despite its economic importance, not much information exists on growth and productivity of durum wheat in Iran and Isfahan. In order to evaluate growth, grain yield, and attributes in three durum wheat genotypes, Osta/Gata, Dipper-6, and PI40100, with five planting densities of 200, 275, 350, 425 and 500 seeds/m2, a four-replicate RCBD field study with a spilt-plot layout was carried out in winter 2000 to spring 2001 at Lavark Research Farm, College of Agriculture, Isfahan University of Technology. Genotypes were the main-plots and planting densities, the sub-plots. Each plot contained six rows, spaced 25cm apart, each 6m in length. While Osta/Gata produced a greater spikes/m2, 1000-grain weight and grain yield, PI40100 indicated a greater height, leaf area index (LAI) and biological yield, and Dipper-6 produced a larger number of grains per spike and harvest index, compared to the other two genotypes. Increasing plant density led to an increase in LAI, spikes/m2, grain yield, biological yield and harvest index but a decrease in grains/spike and 1000-grain weight. Grain yield was positively correlated with spikes/m2, grains/spike and 1000-grain weight, despite negative correlations with LAI and plant height. It may be concluded that with environmental conditions such as those encountered in Isfahan in 2000-2001, Osta/Gata can be planted at approximately 425 seeds/m2, if an acceptable grain yield is to be achieved.
Gh. Mohammadi, K. Ghasemi Golezani, A. Javanshir, M. Moghaddam,
Volume 10, Issue 2 (7-2006)
Abstract

In order to investigate the effect of different irrigation regimes on some agronomic and physiological characters of three chickpea cultivars (Jam, 301 and Pirooz), a field experiment was conducted in 1998 at the Agricultural Research Farm of Tabriz University, Tabriz, Iran. A split plot experiment based on a randomized complete block design with three replications was used, in which irrigation treatments (full irrigation, irrigation at only branching or flowering and or pod formation stage) were in the main plots and chickpea cultivars were in the sub plots. Under limited irrigation conditions there were no significant differences among irrigation regimes for green cover percentage and the number of pods per plant while rate and duration of grain filling, grain weight and grain yield were significantly higher for irrigation at pod formation than for irrigation at branching or flowering stage. The mean of all the traits, except for the number of seeds per pod were significantly higher for full irrigation than for limited irrigation treatments. Rate of grain filling, maximum grain weight and grain yield were significantly higher for irrigation at flowering than for irrigation at branching stage. While, other characters were not significantly different between these two treatments. Although, green cover percentage and seeds per pod in 301 were higher than those in Jam, but in other cases their response to water limitation was almost similar. All traits, except the number pods per plant, were noticeably lower for Pirooz compared to Jam and 301 cultivars. Green cover percentage showed the highest correlation with the grain yield. This study revealed that among phenological stages of chickpea, pod formation is the most sensitive to water deficit, and that under water limitation conditions chickpea yield could be improved by irrigation at this stage.
H. R. Ali Abbasi, M. Esfahani, B. Rabiei, M. Kavousi,
Volume 10, Issue 4 (1-2007)
Abstract

Effect of nitrogen (N) fertilizer levels and its split applications on yield and yield components of rice (Oryza sativa L.) Cv. Khazar was investigated in a completely randomized block design with 3 replications in a paddy light soil at Guilan province, Iran, 2003. In this experiment, six treatments including: T1-control (no N fertilizer) T2- 40 kg/ha N (at transplanting time) T3- 80 kg/ha N (at transplanting, and tillering times) T4- 80 kg/ha N (at transplanting, tillering, and panicle initiation times) T5- 120 kg/ha N (at transplanting, and tillering times) and T6- 120 kg/ha N (at transplanting, tillering, and panicle initiation times) were compared. Results showed that the highest fertile tiller number was obtained in the fifth and sixth treatments with double and triple split applications of 120 kg/h N (236 and 248 m-2). The highest fertile filled spikelets percentage (84.8%), 1000-grain weight (26.1 g) and grain yield (4.83 t/ha) belonged to the sixth treatment, but grain yield and 1000-grain weight were not significantly differerent in the fourth and sixth treatments with three fertilizing times. This finding may have resulted from the third topdressing application of nitrogen fertilizer in panicle initiation and higher leaf area (44.8 and 45.5 Cm2), leaf greenness (39.4 and 39.9) and leaf nitrogen concentration (31.2 and 33.6 g/kg) during grain filling in the fourth and sixth treatments. Regression analysis also showed that flag leaf greenness (SPAD values at 5 days after flowering) and flag leaf area accounted for about 75% and 78% changes in yield, respectively. In conclusion, triple split application of 80 kgN/ha could be suggested for rice Cv. Khazar in these regions since the yield would be the same as the application of 120Kg/ha N.
M. R. Tadayon, Y. Emam,
Volume 11, Issue 1 (4-2007)
Abstract

In order to study the physiological responses of two barley cultivars to salinity stress, a 4-replicate CRD greenhouse experiment was conducted during at the College of Agriculture, Shiraz University, Iran2003-2004. The treatments consisted of two barley cultivars: Afzal and Reyhan and five salinity levels: 0, 4, 8, 12 and 14 dS/m. Seedling emergence, number of tillers and leaves per plant, leaf area and dry matter decreased with increasing salinity levels. The reductions were lower in Afzal (salt tolerant) than Reyhan (salt sensitive). A lower Na+ and higher K+Na+ in Afzal compared to Reyhan were observed under high level of salinity. The results of the present experiment also showed that the tolerance to salinity was associated with a greater stomatal conductivity, as well as transpiration and photosynthesis rate. Sub-stomatal CO2 concentration in both cultivars decreased with an increase in salinity, with the exception of 12dS/m, where it led to an increase in sub-stomatal CO2 concentration. Leaf temperature increased with an increase in salinity level in both cultivars, whereas a more pronounced decrease for number of fertile tillers, ears per plant, kernels per ear, thousand grain weight and harvest index was observed in Reyhan compared to Afzal .Since a higher tolerance to salinity in Afzal was apparently associated with a lower concentration of Na+ and a higher K+/Na+ ratio of the shoots, this trait could probably be used for yield improvement of barley cultivars under saline conditions.
P. Sharifi, M. Tajbakhsh,
Volume 11, Issue 41 (10-2007)
Abstract

To evaluate the effect of plant density and detopping on grain yield, protein content biological yield harvest index, growth indices, number of cob in each plant, No. of row per ear, No. of grain in each row, thousand seed weight of corn (Zea mays L. ar. SC 704), an experiment was conducted at the experimental statues of Research Center of Uremia Agricultural College in 2004. The Treatment design was split plot in randomized complete block design with four replications. The main plots included plant density at three levels (53000, 66000, and 88000 Plants/ha) and the subplets comprised three levels: (1) no detopping (control) (2) removing canopy only and (3) removing canopy and three leaves above the node. Analysis of Variance of data showed that both detopping treatment and plant density influenced the number of kernel per ear ,1000 grain weight, ear weight, total dry weight of biomass, seed yield and harvest index. Canopy detopping led to a marked increase in photo assimilateion import grains. The highest plant density evaluated, 88000 plants per hectare with detopping of three above leaves had the highest number of cobs per square meter. In plant density of 53000 plants per hectare and canopy detopping treatment, the number of grain per ear was greater than other densities. The efficiency of harvest index increased under corn detopping compared with control, and this increase with an increase in photosynthesis contributed to grain yield. It was concluded that major increase in grain yield under high plants density and tassel detopping was due to improvement of physiological indices.
M Noruzi, A Jalalian, Sh Ayoubi, H Khademi,
Volume 12, Issue 46 (1-2009)
Abstract

Crop yield, soil properties and erosion are strongly affected by terrain parameters. Therefore, knowledge about the effects of terrain parameters on strategic crops such as wheat production will help us with sustainable management of landscape. This study was conducted in 900ha, of Ardal district, Charmahal and Bakhtiari Province to develop regression models on wheat yield components vs. terrain parameters. Wheat yield and its components were measured in 100 points. Points were distributed randomly in stratified geomorphic surfaces. Yield components were measured by harvesting of 1 m2 plots. Terrain parameters were calculated by a 3×3 m spacing from digital elevation model. The result of descriptive statistics showed that all variables followed a normal distribution. The highest and lowest coefficient of variance (CV) was related to grain yield (0.36) and thousand seeds weight (0.13), respectively. Multiple regression models were established between yield components and terrain parameters attributes. The predictive models were validated using validation data set (20% of all data). The regression analysis revealed that wetness index and curvature were the most important attributes which explained about 45-78% of total yield components variability within the study area. The overall results indicated that topographic attributes may control a significant variability of rain-fed wheat yield. The result of validation analysis confirmed the above-stated conclusion with low RMSE and ME measures.

Page 1 from 1     

© 2024 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb