Showing 73 results for Efficiency
Sayed-Farhad Mousavi, Ahmad Mohammad-Zadeh, Ahmad Jalalian, Hossein Samadi-Boroujeni,
Volume 1, Issue 2 (10-1997)
Abstract
One of the most vital problems in the storage and utilization of surface waters for drinking, flood control, hydropower, and agricultural purposes is that of sedimentation in reservoirs and subsequent decline of dam lifetime. The useful lifetime of a dam is defined as the time necessary for approximately 80% of the volume of its initial capacity to be filled by sediments washed in by water. It is a function of the volume of the incoming sediments, specific weight of sediments, and reservoir trap efficiency. Trap efficiency depends on sediment characteristics, life, shape, and rule curves of the reservoir as well as on the capacity-inflow ratio. It is the purpose of the present study to calculate sediment trap efficiency of small dams and also to determine the relationship(s) among the effective parameters in the Chaharmahal and Bakhtiary region. For our purposes, 14 small earth dams (with heights of less than 15 m and capacities of about 1 MCM) were selected around Shahrekord and Borougen. Since no data were available on the erosion and sedimentation for these dams, the MPSIAC empirical model was used to estimate the incoming sediment to the dams' reservoirs. The model considers nine factors effective on erosion and sediment production in each watershed. These factors were analyzed for the watershed of each dam under study and the annual sediment yield was calculated. The amount of sediments retained in the reservoirs as a result of the working life of the dams was estimated by reservoir surveying. The trap efficiency was calculated for all the reservoirs under study. The results obtained revealed that the trap efficiencies for these small dams ranged from 10.4 to 68.9%. New curves were developed and suggested for the trap efficiency of small dams based on these results.
Sayed Farhad Mousavi, Behrouz Mostafazadeh, Shokrollah Absalan,
Volume 2, Issue 4 (1-1999)
Abstract
This study aims to evaluate the present management of border irrigation systems applied to wheat, alfalfa and sugar-beet farms in Boyer-Ahmad and Gachsaran cities in Kohgiloyeh and Boyer-Ahmad Province. Experimental farms included 8 alfalfa farms, 5 wheat farms and 5 sugar-beet farms. The experiments were conducted at different growth stages of plants and customary borders with prevalent dimensions, slopes, and management practices. The relationship between management allowable deficit, moisture deficit before irrigation, and infiltrated depth indicated that in most cases either “deficit irrigation” or “stress irrigation” had been applied. This type of irrigation has positive effects on water use but negative effects on supply of required soil moisture for plants. In the first to third irrigations, measured application efficiencies ranged from 40.8% to 100%, 52.2% to 100%, and 61.1% to 100%, respectively. Graphs of advance, recession, and ideal recession showed the effects of border slope and length on inflow cut time and uniformity of water distribution. Water infiltration curves showed the amount of deficit irrigation. The results showed that weak irrigation management is the result of three parameters: lack of knowledge on the part of farmers about soil moisture conditions and correct time for irrigation, weak irrigation scheduling, as well as an imbalance between available water supply and irrigation requirements which leads to wasting water and reduced irrigation efficiency.
B. Siahsar, A. Rezai,
Volume 3, Issue 3 (10-1999)
Abstract
In order to study the genetic and environmental variability of morphological and phenological characteristics and also to gain a better understanding of the morphological basis of yield variation in soybean, an experiment was conducted at Research Farm, College of Agric., Isfahan University of Technology, in 1996. The experiment was arranged in three augmented designs with 285 lines and 5 control varieties. There were highly significant differences among genotypes for all the characteristics studied. The phenotypic coefficients of variability were greater than the genotypic ones for all the traits although the differences for most of them were small. The highest phenotypic and genotypic coefficients of variation, in order of magnitude, were obtained for number of pods per plant, days to flowering, plant height, height of the lowest pod, and number of lateral branches. Heritability estimates and the percent of genetic improvement for these traits and seed weight were high but for seed yield per plant were low. The lowest coefficients of variability were related to number of seeds per pod and days to germination. The results of stepwise regression analysis indicated that the maximum variation in seed yield could be attributed to the number of pods per plant, number of seeds per pod, and 100-seed weight. Factor analysis in addition to emphasizing the importance of yield components, resulted in four factors which determined 97.34% of yield variation. These factors which were indicators of physiological sink and source, with respect to the traits contained, were named as photosynthetic sink, plant architecture, fixed capital, and weight, respectively. In general, it was concluded that in order to improve soybean cultivars, selection should be in favor of plants with stronger structure, higher number of leaves, nods and pods per plant, and higher seed weights.
T. Sohrabi, U.a. Khoshkhahesh,
Volume 3, Issue 4 (1-2000)
Abstract
The purpose of this research is to determine the application efficiency of rice irrigation plots and to analyze the reasons for low efficiency. The study will also try to determine the effective factors which could increase the application efficiency of rice fields. The selection of rice fields was based on climate, soil characteristics, and farmer management. Water application efficiency was determined by field measurements in three modern irrigation networks named Fouman (F), Rasht (G) and Lahidjan (D). In the meantime, a traditional network was included for comparison. In the study areas, the soil texture was heavy with an infiltration rate of less than 3 mm/day. The study was carried out under two different conditions: (1) without return flow and (2) with return flow. In the first case, the average application efficiencies in Fouman (F), Rasht (G) and Lahidjan (D) were about 51.2, 49.0 and 49.4 percent, respectively and the maximum and minimum values were about ((52.6, 49.7)), ((50.7 , 47.3)), and ((50.7 , 48.0)) percent, respectively. In the second case, the average application efficiencies for the above-mentioned regions increased to 73.4, 73.3 and 72.4 percent, respectively and the maximum and minimum values were about ((74.3, 72.4)), ((74.3, 72.1)), and ((73.0, 71.5)) percent, respectively. Runoff ratios in the above-mentioned regions were 30, 33 and 31 percent, respectively. During growing period (from transplanting to harvesting), the average applied irrigation water was about 1130 mm (11300 m3/ha) and the average evapotranspiration was determined to he about 561mm.
B. Mostafazadeh, M. Farzamnia,
Volume 4, Issue 3 (10-2000)
Abstract
In this research, the hydraulic behavior of furrow irrigation was investigated under cut-back, Walker-Skogerboe and conventional methods at the three experimental farms of Lavark, Shervedan, and Isfahan University of Technology for three irrigation events. In each farm, data were collected for each of the above methods with at least three replications including furrow shape, furrow length, furrow slope, soil texture, advance and furrow inflow and outflow.
The parameters of Kostiakov-Lewis infiltration function were determined using the volume balance method. The deep percolation ratio, runoff ratio and application efficiency were then computed.
The results showed that deep percolation ratio was higher in the cut-back method as compared to the Walker-Skogerboe method (18.6% as compared to 13.7%) and the runoff ratio was less in the cut-back method as compared to those in the Walker-Skogerboe and conventional methods (12.4% as compared to 16 and 20.6%, respectively). The effect of the two parameters of deep percolation ratio and runoff ratio caused, in general, the application efficiency to be less in the conventional method than those in the cut-back and Walker-Skogerboe methods (42.7% as compared to 69 and 70%, respectively). In general, the cut-back method had a higher application efficiency in heavy texture soils as compared to light texture soils (73.9% as compared to 51.2%).
J. Torkamani,
Volume 4, Issue 3 (10-2000)
Abstract
The main objective of the present study was to investigate the production and marketing of Iranian saffron. About 99% of Iranian saffron is produced in Khorasan Province. Therefore, Khorasan was selected for the current study. Data were collected through the stratified random sampling method from 232 saffron producers in Torbat Heidarieh, Ghaenat and Gonabad regions through interviews in fall 1999. The production functions of saffron were estimated by using transcendental forms for the three study regions. Technical efficiencies for saffron producers were estimated using transcendental stochastic frontier production functions. Finally, wholesale, retail and marketing margins as well as marketing efficiency were estimated.
The results of the current study revealed that farmers were not using some of the inputs optimally. Study of the technical efficiency of saffron growers indicated that there was a considerable possibility of increasing production by increasing farmers’ efficiencies. The average of wholesale, retail and marketing margins of one kilogram of saffron were estimated to be 483, 410 and 893 thousand Rials, respectively, in the three study regions. Also, marketing efficiency was calculated at 155%. Finally, a marketing channel as a part of marketing strategy was proposed for Iranian saffron.
A. Alizadeh, A.g. Ghorbani, G.h. Haghnia,
Volume 4, Issue 4 (1-2001)
Abstract
In order to compare the effect of drip and furrow irrigation methods with different quantities of water (50%, 75%, and 100% of the amount of water evaporated from class A pan evaporation during irrigation intervals) on yield and quality of tomato, an experiment was conducted on a silty loam soil in Mashhad Agricultural Research Station. The experimental design was a factorial trial with completely randomized blocks and. four replications.
The results showed that the highest yield (51 t/ha) was obtained from the treatment of drip irrigation with 100% water application. This amount was 4.5 tons higher than the yield from furrow irrigation treatment. Deficit irrigation by 25 and 50 percent decreased total yield by 34.7% and 67.95% in the drip irrigation method and by 27.57% and 64.29% in the furrow irrigation, respectively. Water use efficiency in drip irrigation was two times higher than that in the furrow treatment. Quality and chemical composition of the fruits were not significantly different in the two irrigation methods. Increasing the water deficit, however, increased the amount of soluble solids of the fruits.
J. Torkamani,
Volume 5, Issue 2 (7-2001)
Abstract
The main objective of the present study is to analyze the effects of agricultural crop insurance on farmers’ technical efficiency and risk attitude. Required data came from questionnaires that were completed by the Institute for Planning and Agricultural Economics of the Ministry of Agriculture. Farmers’ technical efficiency and attitude toward risk were estimated using stochastic frontier production function and equally likely certainty equivalent method for both insured and non-insured groups. Results revealed that effects of agricultural insurance on farmers’ technical efficiency were significantly positive in the three study regions.
Results of estimating risk aversion coefficients of study farmers showed a positive effect of insurance on risk aversion coefficients. However, this effect was significant only in two of the climatic regions under study.
B. Hatami, H. Ghahari,
Volume 5, Issue 3 (10-2001)
Abstract
Regarding the importance and high potential of
Encarsia formosa Gahan (Hymenoptera: Aphelinidae) for control of the greenhouse whitefly,
Trialeurodes vaporariorum Westwood (Homoptera: Aleyrodidae), the effect of different diets and storage of the parasitoid at low temperatures on its longevity and efficiency was studied. The average longevity of the parasitoid on different diets including honey-syrup 15%, honey-syrup 10%, sucrose syrup 15%, honeydew of whitefly were significantly different at 1% from distilled water and control (without water and food) treatments.
Change in honey-syrup concentration at a range of 5% did not affect the longevity of the parasitoid. The honeydew and sucrose-syrup treatments were not significantly different. This was probably due to the relative similarity of food quality of these two diets. Storage of host parasitized nymphs containing pupae of 1-2 days-old of E. formosa at 8±1°C affected the emergence rate and efficiency of adult parasitoids.
Four treatments including the pupae of parasitoids in 4th nymphal instars of the greenhouse whitefly were stored at 8±1°C for 5, 15, 25 and 35 days. Control treatment included pupae of parasitoid that were held at room temperature, 24±4°C. Host nymphs were parasitized by the parasitoids emerging from all treatments. The average parasitized nymphs by parasitoids emerging from 5, 15 days and control treatments were not significantly different at 1 %.
M. Loghavi, A. Mollasadeghi,
Volume 6, Issue 2 (7-2002)
Abstract
In this study tractive efficiency (TE) of MF285 and U650 tractors during moldboard plowing were evaluated and compared. Field experiments were conducted at the Experimental Station, College of Agriculture, Shiraz University, using a randomized complete block design with a 3*3 factorial. The soil was sandy clay loam with an average moisture content of 18% b.d. from zero to 30 cm depth. Test treatments were combinations of three tractor types or conditions (U650, MF285 liquid ballasted and MF285 with no liquid or weight ballast) and three levels of plowing depth (10-15 cm, 15-20 cm and 20-25 cm). Plowing speed was kept constant at about 4 km/h throughout the experiment. The measured or calculated parameters included: tractor drawbar pull and rolling resistance, drive wheel slip and tractor tractive efficiency. Statistical analysis of the test results showed that the primary difference between the tractor types or conditions was in their wheel slip, such that the average wheel slip of U650 was lowest (12.6%) while that of unballasted MF285 was highest (27%) and was reduced to 17.7% with liquid ballasting. Also, while growth of unballasted MF285 wheel slip with increasing plowing depth was drastically high (11% to 48%), that of U650 was quite moderate (9.7% to 16.5%). Analysis of the calculated values of TE showed that there was no significant changes in the TE of U650 with increasing plowing depth and that with an average of 73.8%, it had a desirable performance. The TE of unballasted MF285 that was over 75% at shallow plowing, dropped to 46% with increasing plowing depth, while water ballasting improved the decreasing trend of TE with plowing depth and raised its minimum value to about 63%. The overall results of this study showed that unballasted MF285 tractors had desirable TE only at shallow plowing and that for medium and deep plowing, U650 or water ballasted MF285 tractors should be used.
J. Torkamani,
Volume 6, Issue 3 (10-2002)
Abstract
The main objective of the present study is to investigate the production and marketing of fresh figs in Garmsar Region. Semnan Province has the largest area under fresh figs in Iran. About 84 percent of this area is in Garmsar region, hence, it was selected as the study area. Data were collected by random sampling method through interviews with a sample of 70 fresh fig producers in Garmsar region in summer 1999. The production functions of fresh figs were estimated using translog form for the study region. Technical efficiencies for fresh fig producers were estimated using translog stochastic frontier production function.
Results of the current study revealed that farmers are not using some of the inputs optimally. Study of technical efficiency of fresh fig producers did not show the possibility of increasing production by increasing farmers’ technical efficiencies. The average of retail, wholesale and marketing margins of one kilogram of fresh figs were estimated to be 900, 550 and 1450 Rials, respectively. Also, marketing efficiency was calculated as 151%.
H. R. Karimzadeh, A. Jalalian,
Volume 6, Issue 3 (10-2002)
Abstract
For the study of field wind erosion and the design and evaluation of wind erosion control techniques, detailed observations of soil particle transport and vertical destribution of eroded soil particles are needed. The objectives of this study were: 1) To describe one device for soil transport particle measurement, i. e. the BSNE sediment catcher and 2) To assess vertical distribution of wind–eroded sediment with height in eastern Isfahan. The BSNE sediment catcher is a wind erosion sampler that traps eroded material at seven heights of 0.24, 0.60, 1.08, 2.00, 3.00, and 4.00 m above the soil surface. Each trap consists of a steel container with an inlet and outlet, mounted on a wind vane that rotates about a central pole. Before using the sampler in the field, it was tested and calibrated in the wind tunnel. The results showed that the average trapping efficiency with speeds ranging from 5.2 to 7.2 m sec-1 for 4 different wind–eroded sediments was 0.44 to 0.68. However the trapping efficiency depended on wind speed, particle size distribution, particle density and type of sediment. The sampler had the lowest efficiency for particles < 44 μm. A BSNE sediment catcher was installed in Babaii Air Base. After a sampling period, the sediment in each trap was collected and weighed. The trapped materials were a mixture of saltation and suspension particles. Vertical distribution of wind–eroded sediment showed that the amount of soil collected decreased with increased height and the percentage of fine particles (<63μm) increased with height. The amount of trapped materials for each cm2 frontal intake with increased height were 12.00, 3.42, 1.44, 1.56, 0.75, 0.21, and 0.39 g cm-2, respectively, for the one sampling period.
H. Ghadiri, M. Majidian,
Volume 7, Issue 2 (7-2003)
Abstract
In order to investigate the effects of different nitrogen fertilizer levels and water stress during milky and dough stages on grain yield, yield components and water use efficiency of corn hybrid SC 704 (late maturing, non prolific and dent type), a field study was conducted. The factorial design of the study comprised of a randomized complete block with four replications. Four levels of nitrogen fertilizer (0, 92, 184 and 276 kg/ha nitrogen) along with three levels of irrigation (water stress imposed at milky stage, dough stage and a season-long optimum irrigation) were used as treatments.
Results showed that water stress during milky and dough stages significantly decreased grain yield and thousand kernel weight. Also, effect of nitrogen fertilizer on grain yield, kernel number per ear, kernel weight per ear and thousand kernel weight was significant. Maximum grain yield was produced with 276 kg/ha nitrogen, although no significant differences were found among 92, 184 and 276 kg/ha nitrogen levels. Regarding water use efficiency during water stress, maximum efficiency was observed at milky stage but, as water stress declined with optimum irrigation, water use efficiency decreased.
S. Dehghanian, M. Ghorbani,
Volume 7, Issue 3 (10-2003)
Abstract
In this study, efficiency of apple producers in Khorasan Province was determined by a cross sectional data of 212 apple producers.
Mean technical, allocative, and economic efficiencies were estimated to be around 31, 28, and 9 percent, respectively. A high potential was also detected for increasing these efficiencies. Apple producers’ age and education had positive effects and risk aversion had a negative effect on technical efficiency. Waste reduction, optimal use of inputs, introduction of technical-extension services, and apple insurance are suggested to increase efficiencies.
A. Solaimani Pour, A. R. Nikooie, A. Bagheri,
Volume 9, Issue 1 (4-2005)
Abstract
This study was conducted to determine the problems of marketing channels of damask roses and to seek appropriate solutions to enhance marketing efficiency. The results of the study revealed that traditional and industrial rose production lacked the quality demanded by the market. The efficiency index was % 92.9 in traditional and %55 in industrial production. In addition, with regard to the marketing parameters for each type of production, the share of the factors was calculated. So we can conclude that the reducing units have the most important roles in this process. According to the study, traditional units with %47.2 had a greater share compared with the industrial units (%44.5).
The results have also shown that production retailer wholesalers and middlemen shares were in the lower ranks respectively. Marketing cost coefficient results showed that %70 of the retailer selling price for 1 kg of the product was related to the marketing costs. The costs for industrial units with high and low capacity were %67.7 and %65.4, respectively.
Gh. Khajouei Nejad, H. Kazemi, H. Alyari, A. Javanshir, M. J. Arvin,
Volume 9, Issue 4 (1-2006)
Abstract
This study was conducted to evaluate the effects of four levels of irrigation (irrigation of plants after I1 = 40, I2 =60, I3 = 80 , and I4 = 100mm of evaporation from class A pan) and four plant densities(D1 = 30, D2 = 40, D3 = 50 and D4 = 60 plants/m2) on the seed yield and seed quality in three soybean cultivars(V1=Hobit, V2=Williams and V3=Hill) in a split factorial design, based on the completely randomized blocks, with three replication for two years(2001 and 2002). The Irrigation treatments were assigned to the main plots, and the plant densities and cultivars to the sub plots. Results indicated that soybean seed yield was influenced by the different irrigation and plant density levels in the both years. Irrigation levels I2 produced the highest and I4 the lowest seed yield. It was also revealed that the plant density D3 produced the highest and D1 the lowest seed yields. Among the cultivars under investigation, V2 produced the highest and V3 the lowest seed yield . Seed oil and its protein contents both were affected significantly by the irrigation levels, plant densities and cultivars in both years. The plants receiving I1 treatment had the highest and those having I4, the lowest percentages of seed oil. Changes in the plant densities also affected seed oil and protein content. The plant density of D1 caused the seeds to have the highest oil and lowest protein percentages. However, D4 decreased oil and increased protein percentages. The highest water use efficiency was obtained from I3 and that of the lowest value from I1. The results also indicated that D4 had the highest and D1 the lowest water use efficiencies. Therefore, it could be concluded that the water use efficiency can be increased by increasing the plant density per unit area. The highest efficiency for biological and grain yield belonged to V2 and V1 respectively where as the lowest efficiency for those two mentioned characters belonged to V1 and V3, respectively. However, the treatment I2V2D2 is recommended for higer the seed yield production per unit area.
S. R. Miraei Ashtiani, P. Zamani, A. Nikkhah, M. Moradi Shahrbabak, A. Naserian, F. Akbari,
Volume 9, Issue 4 (1-2006)
Abstract
Improvement of feed efficiency in dairy farming economically has a great importance. In this study, the genetic parameters of net energy efficiency and its relationships with milk yield, 3.2% fat corrected milk, body weight, gross income and income over feed costs were investigated, by the 2589 monthly records collected from the 723 lactating cows in the 3 herds. The different requirements of energy were estimated, by the National Research Council (NRC) models. A general linear model was employed for determining significant factors affecting each trait. The genetic parameters were estimated by a multivariate analysis with the derivative free approach of restricted maximum likelihood algorithm. The animal models contained the fixed effects of herd-year-season, parity number and stage of lactation, the regression coefficients of each trait on the dietary levels of rumen undegradable protein and metabolizable energy, and the random effects of animal additive genetic, permanent environment and residuals. The heritability of milk yield, 3.2 percent fat corrected milk, body weight, net energy efficiency, gross income and income over feed cost, were estimates 0.31, 0.32, 0.30, 0.34, 0.24 and 0.29 respectively. The results of this study indicated that the direct selection for net energy efficiency might genetically improve the feed efficiency. It also seems that the selection for fat corrected milk may be effective for the indirect improvement of feed efficiency and economic performance of dairy cows.
M.j. Seghatoleslami, M. Kafi, I. Majidi, G. Nour-Mohammadi, F. Darvish,
Volume 11, Issue 1 (4-2007)
Abstract
In order to examine the responses of proso millet (Panicum miliaceum) to drought stress at different growth stages, four breeded genotypes and a local one of proso millet were selected and planted in a split-plot design with five irrigation treatments and three replications.This experiment was conducted in two locations, Birjand and Sarbisheh. Irrigation treatments included well - watered, drought stress at vegetative stage, ear emergence stage, seed filling stage and vegetative and seed filling stages which were considered as main- plots. The first five mentioned genotypes were considered as sub-plots. Drought stress. caused a great reduction in grain yield and WUE at ear emergence stage. This reduction represented itself in the number of seed per ear and the weight of seeds, but it didn’t have any effects on the number of ear. At ear emergence stage, the drought stress increased the floret death and loss of weight of seeds which resulted in the reduction in the harvest index of both ear per plant and seed per plant. Comparison of genotypes indicated that since K-C-M.4 had a greater number of ears and K-C-M.9 had heavier seeds that had higher grain yield. These two genotypes had the highest WUE and their harvest indices were relatively higher. Due to the salinity of water and infertility of soil in Birjand, the grain yield was lower compared with Sarbisheh. In summary, it can be said that genotype K-C-M.4 proved to be more suitable for both areas.
R. Hajiboland, S.y. Salehi, T. Aghajan-Zadeh, M. Abhari, E. Nazifi,
Volume 11, Issue 1 (4-2007)
Abstract
Zn deficiency is one of the most important nutritional disorders after macro-nutrients in rice. There are considerable genotypic differences among rice genotypes in response to Zn deficiency. Determination of such differences and introduction of efficient genotypes could lead to significant reduction of fertilizer use for rice production. In this research, some of the most frequently cultivated rice genotypes in Northern Iran, were compared for their tolerance to Zn deficiency in a field (11 cultivars) and hydroponic (16 cultivars) experiment. Four levels of Zn fertilizer were used in field experiment including 0 (control), 25, 50 and 100 kg ha-1 and three different activity of Zn in chelator-buffer experiment including 130 (control), 23 and 5 pM. Experiments were conducted using complete randomized block design and data was analyzed using two factorial analysis of variance including Zn level and genotypes. In addition to yield components in the field study and dry matter production in the hydroponic culture medium, concentration of Zn was also determined in shoot, root and seed. The comparison of all yield components showed that the cultivar Onda was the most Zn-inefficient (susceptible to Zn deficiency) and Khazar was the most Zn-efficient (tolerant to Zn deficiency) genotypes under field conditions. In hydroponic experiment, cultivars Fajr, Tarom Hashemi and Onda were determined as the most Zn-inefficient and Shafagh, Amol and Mianeh were recognized as the most Zn-efficient genotypes. The most significant response to Zn fertilizer, in terms of Zn accumulation in seeds, was observed in Nemat and Tarom Deilamani. In contrast, Cadoos accumulated Zn mostly in straw. Results of our experiments introduced not only the genotypes with the highest yield on soils low in available Zn, but also genotypes with the highest Zn accumulation in seeds in response to Zn fertilizers which are important for human nutrition.
A. Karimi, M. Mazardalan, M. Homaeia, A. M. Liaghat, F. Raissi,
Volume 11, Issue 40 (7-2007)
Abstract
In Iran, fertilizers are mainly applied directly to soil. In such conditions, the yield and fertilizer use efficiency are usually low. The simultaneous application of fertilizers and irrigation water (fertigation) is an appropriate alternative to increase the efficiency of applied water and fertilizers. The objective of this study was to investigate the effect of various irrigation and fertilizer amounts on efficiency of applied fertilizers when used as fertigation in a Tape irrigation system. A field experiment was carried out with sunflower as a completely randomized design with 20 treatments and 3 replicates. The fertilizers were applied by fertigation. Four levels of the water (60, 80, 100 and 120% treatments I1 to I4) and five rates of the recommended fertilizers (0, 60, 80, 100, and 120% treatments F0 to F4) were applied.The recommended amounts consisted of 400 kg CO(NH2)2, 50 kg KCl, 30 kg FeSO4, 30 kg MnSO4, 50 kg ZnSO4, 30 kg CuSO4, and 30 kg H3BO3 per ha. Tape irrigation was used for every treatment. The results indicated that in fertigation method, there were significant differences ( P≥0.01) in fertilizer use efficiency (FUE) for the total dry matter and grain yield between treatments. The results showed that by increasing applied water, fertilizer use efficiency was increased and affected by fertilizers treatments. Thus due to higher availability of nutrients, fertilizer use efficiency increased. was Fertilizer use efficiency also decreased by increasing fertilizer rate. The results also demonstrated there were significant differences in all the treatments. The results showed that fertilizer use efficiency of K is higher than N and N is higher than P.
