Volume 4, Issue 1 (Journal OF Welding Science and Technology of Iran 2018)
JWSTI 2018, 4(1): 89-99 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mehrabi Sharifabad H, Hajisafari M. Effect of Weld Metal Microstructure on the Fatigue and Corrosion-Fatigue Properties of GTA-Welded 304 Stainless Steel . JWSTI 2018; 4 (1) :89-99
URL: http://jwsti.iut.ac.ir/article-1-185-en.html
URL: http://jwsti.iut.ac.ir/article-1-185-en.html
1- Department of Materials - Welding Engineering, Bandarabas Branch, Islamic Azad University, Bandarabas, Iran
2- Department of Metallurgical and Materials Engineering, Yazd Branch, Islamic Azad University, Yazd, Iran
2- Department of Metallurgical and Materials Engineering, Yazd Branch, Islamic Azad University, Yazd, Iran
Abstract: (10056 Views)
In this research, two different filler metals, ERNiCrMo-3 and ER309L, were used for developing different microstructure, austenite (γ) and austenite and ferrite (γ+δ) in the weld metal and fatigue properties of welded samples were evaluated in the air and sea water environments. Microstructural studies indicated a good agreement between predicted microstructures via schiffler diagram and metallographic studies. Evaluation of fatigue properties in the air and sea water environments revealed the austenitic weld metal, like base metal microstructure, improved the fatigue strength of welded samples. Fractographic studies and FESEM-EDS analysis showed more ductile fracture of welded samples by using ERNiCrMo-3, formation of more uniform and deeper dimples in the final zone of fatigue fracture, than that of welded samples by using ER309L. Furthermore, unlike dimple formation centers in welded samples by using ER309L, Mo-Ti rich intermetallics caused formation of dimples in the welded sampled via ERNiCrMo-3.
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
