Volume 9, Issue 1 (Journal OF Welding Science and Technology 2023)
JWSTI 2023, 9(1): 59-65 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Lalpour A, Mosallaee M, Ashrafi A. Modeling of stir zone grain size variation in the friction stir processed Al-2024 according to the FSP parameters. JWSTI 2023; 9 (1) :59-65
URL: http://jwsti.iut.ac.ir/article-1-427-en.html
URL: http://jwsti.iut.ac.ir/article-1-427-en.html
1- Material Science group, Engineering Faculty, Yazd University, Yazd, Iran. , lalpour2004@yahoo.com
2- Material Science group, Engineering Faculty, Yazd University, Yazd, Iran.
3- Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran.
2- Material Science group, Engineering Faculty, Yazd University, Yazd, Iran.
3- Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran.
Abstract: (2005 Views)
In the present study, friction stir processing (FSP) technique was carried out on the AA2024 sheet at different traverse speed (63 to 250 mm/min) and rotation speed (315 to 800 rpm). The temperature and grain size of stirred zone (SZ) were measured and their relationship was analyzed and effect of FSP parameters on the grain size of SZ was determined. Experiment and analytical investigations revealed that SZ grain size complies the exponential temperature-dependent relationship and can be defined the mathematical equation. Calculations indicate that a change in operational variables (rotation and traverse speeds) makes no variation in strain rate, and it is constant.
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
