H. Rezaei Ashtiani, M. Shafiee,
Volume 4, Issue 1 (8-2018)
Abstract
Friction stir spot welding (FSSW) is a type of solid state welding that is used in the connection of small pieces and light metals such as aluminum alloy especially. The technical problem during melting of aluminum alloys is one of the most important reasons for developing application of friction stir welding for aluminum alloys. In this research, the effects of important processing parameters such as tool rotation speed, dwell time, plunge depth of tool and sheets thickness on the mechanical properties such as failure force and energy of FSS welded AA-3105 alloy have been experimentally studied using micro hardness and tensile tests. Tensile-shear tests show four different fracture modes of weld failure which consist of shear fracture, circumferential fracture, nugget pull out fracture and fracture in base material modes. The results show that the weld strength drops with increasing the tool rotation speed. Strength and hardness of weld and weld zone increase and then decrease with increasing dwell time of rotational tool which it can be obtained an optimum value of dwell time. Strength and fracture energy and load of welds increases with increasing the sheet thickness
F. Harati, M.a. Jabbareh, S.m. Mousavizadeh,
Volume 8, Issue 2 (1-2023)
Abstract
The present research aims to study the liquation and re-solidification of liquid during friction stir spot welding of AZ91 alloy. Although friction stir spot welding is a solid-state process, the presence of Mg17Al12 intermetallic compounds results in liquation during the welding process. In this study, friction stir spot welding was performed with a tool rotational speed of 2500 rev/min and a tool dwell time of 5 seconds. The microstructural assessment was carried out by optical and scanning electron microscopes. The results showed that initiation of liquation from the inner and outer edge of the eutectic precipitates occurred based on the melting of residual eutectic. Moving toward stirred zone, a liquid film formed along the grain boundaries. The liquid re-solidified as a composite structure of α-Mg/, which α-Mg phase dispersed in γ-Mg17Al12 matrix. Also, the results showed that eutectic morphology resulting from re-solidification is related to the cooling rate. Eutectic morphology changed from granular to fibrous by increasing the cooling rate. Also, the liquid film along the grain boundaries re-solidified as a divorced eutectic.
