Mahdi Lashkari Ghoochani, Behrooz Beidokhti,
Volume 2, Issue 2 (11-2016)
Abstract
In this research 420 martensitic stainless steel welded with the ER308L, ER309L and ER420 fillers by GTAW method. The corrosion properties of the samples has been studied in 3.5% NaCl solution with and without CO2. Potentiodynamic polarization used to obtain the ER308L and ER309L have the best corrosion properties. In addition the welding process makes the 420 HAZ zone to be sensitized. The pitting potential of the samples has been decreased in presence of carbon dioxide. Furthermore, by adding CO2 to the solution the pH has been decreased and the corrosion potential reached near the -500 mV/SCE and the passivity current is also lowered.
M. Chiani, M. Atapour,
Volume 5, Issue 2 (1-2020)
Abstract
In this study, corrosion behavior of Ti-6Al-4V titanium alloy joint by friction stir welding with a rotational speed of 375 rpm and a travel speed of 100 mm/min was investigated. The welding procedure was carried out under β-transus temperature that was consisted of equiaxed grains in the stir zone. The corrosion behavior of the welded joint was investigated in 3.5% NaCl solution at temperatures of 25, 37 and 80 . Microstructure investigation of sample surfaces after electrochemical experiments was conducted using SEM. results revealed that the β phase was mainly corroded at all three testing temperatures, however the corrosion in the sample tested at 80 °C was more considerable.
