Volume 38, Issue 2 (Journal of Advanced Materials-Summer 2019)
2019, 38(2): 25-34 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Afrashi M, Semnani D, Talebi Z. Adsorption of Fluconazole Drug on Silica Aerogel by Immersion Method and Investigation of the Rate and Mechanism of Drug Release. Journal of Advanced Materials in Engineering (Esteghlal) 2019; 38 (2) :25-34
URL: http://jame.iut.ac.ir/article-1-1013-en.html
URL: http://jame.iut.ac.ir/article-1-1013-en.html
Department of Textile Engineering, Isfahan University of Technology, Isfahan, Iran. , d_semnani@cc.iut.ac.ir
Abstract: (5067 Views)
In this study, adsorption of fluconazole on silica aerogel was performed successfully by the immersion method in the 1% solution of fluconazole-ethanol at the ambient condition and without using the supercritical method. The hydrophobic and hydrophilic silica aerogels were synthesized by the two-stage sol-gel method and dried at the ambient temperature. This method had most of drug loading at 24 h. It was 1.92% and 1.98% for the hydrophilic and hydrophobic silica aerogels, respectively. Physical properties of the synthesized aerogels were studied by the nitrogen absorption and desorption tests. The presence of fluconazole and the chemical structure of the samples were determined by fourier-transform infrared spectroscopy (FTIR). As well, the loading and release of the drug were investigated using a spectrophotometer. The results showed the structure of the synthesized aerogels had a pore diameter of 6-8 nm and a surface area of about 800-100 m2/g. The study of the drug release also revealed that the release rate of fluconazole in the hydrophilic silica aerogel was higher than that of the hydrophobic sample.
Type of Study: Research |
Subject:
Biomaterials
Received: 2018/12/22 | Accepted: 2019/04/28 | Published: 2019/09/15
Received: 2018/12/22 | Accepted: 2019/04/28 | Published: 2019/09/15
Send email to the article author
