Volume 17, Issue 1 (7-1998)
1998, 17(1): 165-175 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
M. H. Abbasi and M. Safarnoorallah. Extraction of Vanadium Oxide from Boiler Fuel Ash. Journal of Advanced Materials in Engineering (Esteghlal) 1998; 17 (1) :165-175
URL: http://jame.iut.ac.ir/article-1-127-en.html
URL: http://jame.iut.ac.ir/article-1-127-en.html
Abstract: (6810 Views)
Fuel oil used in power plants contain metal impurities like Vanadium. After combustion, this metal remains in boiler fuel ash in the form of oxide. In this research, extraction of Vanadium oxide from fuel ash has been investigated. Two processes were used for this purpose. A pyro- hydrometallurgy and a hydrometallurgy process. In the pyro-hydrometallurgy process, using sodium carbonate, salt roasting of the ash followed by water leaching was carried out. Vanadium was then precipitated as ammonium vanadates which on heating decomposed and vanadium pentoxide (V2O5) was obtained. In the hydrometallurgy process, the ash was dissolved in sodium hydroxide. Vanadium oxide was then recovered from solution. Effects of various parameters in each case were investigated and the optimum condition for maximum recovery was determined.
