Volume 24, Issue 1 (7-2005)
2005, 24(1): 367-380 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
A. A. Gharehaghaji and M. Rafimanzelat. Effects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns. Journal of Advanced Materials in Engineering (Esteghlal) 2005; 24 (1) :367-380
URL: http://jame.iut.ac.ir/article-1-351-en.html
URL: http://jame.iut.ac.ir/article-1-351-en.html
Abstract: (5269 Views)
Regarding the importance of ring spinning method among spinning systems, great potentials exist for research about on the improvement of the quality and properties of ring spun yarn. This study aims to improve yarn quality by changing the shape and dimensions of spinning triangle through forming a groove in the middle zone of the front darfting
roller with a curvature of 5 to 7 mm. For the top drafting roller, we used an elastic O-Ring with dimensions similar to those of the groove. With this change, the geometry of spinning triangle is expected to change as an Euclidean geometry to a half cone Riemannian shape. The results show improvement in yarn tenacity, elongation at break, yarn evenness and faults, shape of spinning baloon, decrease in yarn tension and yarn breakage, improvement in fiber packing in the yarn cross section, more evenness in the yarn count and twist, and, finally, better inter-structure compared to the normal ring spun yarn.
Keywords: Ring spinning, Spinning triangle, Yarn tenacity, Yarn tension, Fiber spinning-in coefficient, Yarn in terstructure
