Volume 26, Issue 1 (7-2007)
2007, 26(1): 165-182 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
H. Zamani and S. Ziaiee Rad. Coupled Flap-Lag-Torsional Vibration Analysis of Pre-twisted Non-uniform Helicopter Blades. Journal of Advanced Materials in Engineering (Esteghlal) 2007; 26 (1) :165-182
URL: http://jame.iut.ac.ir/article-1-413-en.html
URL: http://jame.iut.ac.ir/article-1-413-en.html
Abstract: (5860 Views)
An approximate numerical mthod is presented for analysis and determination of modal characteristics in straight, pretwisted non-unifom helicopter blades. The analysis considers the coupled flapwise bending (out of plane), chordwise bending (in plane), and torsion vibration of both rotating and non-rotating blades. The proposed method is based on the integral expansion of Green functions (structural influence functions) to develop the equations of motion for a clamped-free blade. Several examples are presented in various states such as flapwise bending, coupled bending-bending, coupled bending-torsion, and coupled bending-bending-torsion vibration analysis. The results obtained were compared with available numerical results in the literature. A modal testing and modal analysis were also carried out on a typical helicopter blade in static condition and the results were compared with the numerical ones. The results indicate that the proposed method is fast and robust and can be used for modeling of turbomachine blades, aircraft propellers and helicopter rotor blades.
