Volume 29, Issue 2 (Dec 2010)
2010, 29(2): 1-11 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
J. Aghazadh Mohandesi, A. Nazari. Impact Energy of Functionally Graded Steels with Crack Arrester Configuration. Journal of Advanced Materials in Engineering (Esteghlal) 2010; 29 (2) :1-11
URL: http://jame.iut.ac.ir/article-1-512-en.html
URL: http://jame.iut.ac.ir/article-1-512-en.html
Department of Mining and Metallurgy, Amirkabir Univ of Technoligy , agazad@yahoo.com
Abstract: (5893 Views)
Charpy impact energy of functionally graded steels in the form of crack arrester configuration was investigated. Functionally graded steels which contain layers of ferrite, austenite, bainite and/or martensite could be produced by electroslag remelting. The results showed that notch tip position and the distances of notch with respect to the bainite and martensite layers significantly affect the impact energy of the specimens. Generally, the plastic deformation zone ahead of a crack in a functionally graded material depends on the position of the notch tip where according to the direction of gradient slope may increase or decrease. The closer the notch tips to the brittle phase, the smaller the impact energy of the specimen and vice versa. The effect of plastic zone size on impact energy of functionally graded steels was notionally investigated.
Keywords: Functionally graded steels, Impact energy, Crack arrester configuration, Plastic zone size.
Type of Study: Research |
Subject:
General
Received: 2015/02/9 | Accepted: 2015/05/5 | Published: 2015/05/5
Received: 2015/02/9 | Accepted: 2015/05/5 | Published: 2015/05/5
Send email to the article author
