Volume 31, Issue 1 (Jun 2012)                   2012, 31(1): 29-39 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

E. Ganjeh, H. Khorsand. Evaluation of Microstructure, Quantitative Fractography and Bending Strength in Cr-Mo Powder Metallurgy Steel. Journal of Advanced Materials in Engineering (Esteghlal) 2012; 31 (1) :29-39
URL: http://jame.iut.ac.ir/article-1-534-en.html
Young Researchers Club, Tehran North Branch, Islamic Azad University, Tehran, Iran , navidganjehie@sina.kntu.ac.ir
Abstract:   (8602 Views)
The fracture surfaces of PM Cr-Mo steels intensively depends on pores structure, densification, diffusion of alloying elements, contact area between particles (sinter necks), microstructural homogeneity, and type of applied load. Also, knowing about element distribution in PM parts to evaluate what places are good for crack growth, nucleation and coalescenc is important. In this investigation, fracture surfaces and crack growth mechanism for element distribution environments of cracks were studied under the three point bending (TPB) test. In this work, crack growth mechanism in Cr-Mo PM parts with three different densities (6.7, 7 and 7.2 g/cm3), were evaluated accurately. Crack walk occurred in some places that had more alloying elements, particularity molybdenum. In addition, crack route was obtained from among the sharpened porosities and martensite/bainite structures.
Full-Text [PDF 4009 kb]   (7866 Downloads)    
Type of Study: Research | Subject: General
Received: 2015/02/9 | Accepted: 2015/05/6 | Published: 2015/05/6

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


© 2024 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb