Volume 32, Issue 1 (Jun 2013)
2013, 32(1): 39-53 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
H.R. Salehi, S. Salami, M. Atarian, O. Ozhdelnia. Fabrication and Characterization of Pyrolyzed Phenolic/Carbon Nanocomposite Reinforced by Metal Oxide Nanoparticles. Journal of Advanced Materials in Engineering (Esteghlal) 2013; 32 (1) :39-53
URL: http://jame.iut.ac.ir/article-1-550-en.html
URL: http://jame.iut.ac.ir/article-1-550-en.html
2 Departments of Biomedical Engineering, Amirkabir University of Technology, Tehran, Iran , h.r.salehi@gmail.com
Abstract: (10889 Views)
Carbon fiber composite is one of the most important materials in aerospace engineering applications. For fabrication of this composite, optimum polymerization and carbonization cycles of phenolic resin were obtained [1]. Then, carbon/phenolic composite was fabricated by mixing different weight percentages of T700 carbon fiber with phenolic resin, and the flexural strength of specimens was examined.The samples were pyrolyzed at 1100°C to form high temperature phenolic matrix. Because of high porosity of samples, the composite was impregnated to increase the density and reduce porosity. The maximum flexural strength of samples was obtained with 40 wt. % of fiber. With addition of TiO2 and ZrO2 nanoparticles to carbon/phenolic composite, thermal and mechanical improvement was measured. The samples were examined by ablation test and microstructures of composites were analyzed by SEM.
Keywords: Phenolic resin, Polymer pyrolysis, Metal oxide nanoparticles, Ablation test, Carbon/phenolic composite
Type of Study: Research |
Subject:
General
Received: 2015/02/9 | Accepted: 2015/05/6 | Published: 2015/05/6
Received: 2015/02/9 | Accepted: 2015/05/6 | Published: 2015/05/6
Send email to the article author
