Volume 36, Issue 4 (Journal of Advanced Materials-Winter 2018)
2018, 36(4): 69-88 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Velayi E, Norouzbeigi R. Evaluation of the Effect of Polyethylene Glycol Addition on the Wetting Properties of ZnO Superhydrophobic Surfaces Prepared via Chemical Bath Deposition Method. Journal of Advanced Materials in Engineering (Esteghlal) 2018; 36 (4) :69-88
URL: http://jame.iut.ac.ir/article-1-909-en.html
URL: http://jame.iut.ac.ir/article-1-909-en.html
School of Chemical Petroleum and Gas Engineering, Iran University of Science and Technology, Tehran, Iran , norouzbeigi@iust.ac.ir
Abstract: (10233 Views)
A superhydrophobic ZnO surface was prepared on the stainless steel mesh by a one-step chemical bath deposition method without chemical post-treatment. The effect of adding polyethylene glycol 6000 (PEG 6000) as an organic additive and the type of the alkaline agent were investigated on the morphological and wettability properties of ZnO surfaces. The prepared surfaces were characterized by X-ray Diffraction (XRD), stylus profilometer, Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR) and Raman Spectrometer. The microstructure studies showed that the addition of PEG led to formation of densely branched and uniform ZnO rods with a length of 1.5 µm and a diameter of about 95 nm on the substrate. The surface wettability studies confirmed that the sample prepared in the presence of hexamethylenetetramine (HMTA) and 0.05 mM PEG with branched tree-like micro/nanostructure exhibited excellent superhydrophobic properties with the water contact angle (WCA) of 158.2°±1.5° and contact angle hysteresis (CAH) of 3.5°. In addition, the superhydrophobic showed good chemical stability in the pH range of 4 to 8.
Keywords: Chemical bath deposition method, Superhydrophobic surface, Polyethylene glycol, Static water contact angle, Chemical stability.
Type of Study: Research |
Subject:
Surface engineering and coatings
Received: 2017/05/14 | Accepted: 2017/08/28 | Published: 2018/02/28
Received: 2017/05/14 | Accepted: 2017/08/28 | Published: 2018/02/28
Send email to the article author
