Volume 38, Issue 3 (Journal of Advanced Materials-Fall 2019)
2019, 38(3): 15-27 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Tehrani M, Nosraty H, Lorak A. Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics. Journal of Advanced Materials in Engineering (Esteghlal) 2019; 38 (3) :15-27
URL: http://jame.iut.ac.ir/article-1-962-en.html
URL: http://jame.iut.ac.ir/article-1-962-en.html
1. Department of Carpet, Shahrekord University, Shahrekord, Iran. , mtehrani@lit.sku.ac.ir
Abstract: (3721 Views)
Due to their sensitivity to impact-induced delamination, woven fabric reinforced polymer composites have limited practical applications. Hybridization of polymer composites has been proposed as a solution to this problem. In this study, the effects of fiber reinforcement type, hybridization method, plies stacking sequence and loading rate on mode I delamination behavior of pure basalt, pure nylon, inter-ply and intra-ply hybrid (basalt/nylon) composites were investigated. Composites were length during its propagation in composite samples was measured by mode I delamination test. The inter-laminar fracture toughness of composite specimens was calculated using modified double-cantilever beam theory and the results were compared by statistical methods. A 30 to 80% improvement in the critical fracture toughness of intra-ply hybrid composite compared to pure ones was recorded. Moreover, the delamination initiation load decreased significantly by increasing the loading rate.
Type of Study: Research |
Subject:
Composites
Received: 2018/02/27 | Accepted: 2019/06/19 | Published: 2019/12/1
Received: 2018/02/27 | Accepted: 2019/06/19 | Published: 2019/12/1
Send email to the article author
