Volume 39, Issue 2 (2-2021)
2021, 39(2): 97-117 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Esmizadeh S, Haftbaradaran H, Mossaiby F. Estimation of the Stress Intensity Factors for Surface Cracks in Spherical Electrode Particles Subject to Phase Separation. Computational Methods in Engineering 2021; 39 (2) :97-117
URL: http://jcme.iut.ac.ir/article-1-810-en.html
URL: http://jcme.iut.ac.ir/article-1-810-en.html
1- Department of Civil Engineering, University of Isfahan, Isfahan, Iran.
2- Department of Civil Engineering, University of Isfahan, Isfahan, Iran. ,h.haftbaradaran@eng.ui.ac.ir
2- Department of Civil Engineering, University of Isfahan, Isfahan, Iran. ,
Abstract: (1903 Views)
Experiments have frequently shown that phase separation in lithium-ion battery electrodes could lead to the formation of mechanical defects, hence causing capacity fading. The purpose of the present work has been to examine stress intensity factors for pre-existing surface cracks in spherical electrode particles during electrochemical deintercalation cycling using both analytical and numerical methods. To this end, we make use of a phase field model to examine the time-dependent evolution of the concentration and stress profiles in a phase separating spherical electrode particles. By using a geometrical approximation scheme proposed in the literature, stress intensity factors at the deepest point of the pre-existing surface cracks of semi-elliptical geometry are calculated with the aid of the well-established weight function method of fracture mechanics. By taking advantage of a sharp-interphase core-shell model, an analytical solution for the maximum stress intensity factors arising at the deepest point of the surface cracks during a complete deintercalation half-cycle is also developed. Numerical results for evolution of the concentration profile and the distribution of the hoop stresses in the particle are presented; further, the stress intensity factors found numerically based on the phase field model are compared with those predicted by the analytical core-shell model. The results of the numerical model suggest that the maximum stress intensity factor could significantly vary with changes in the surface flux, increasing potentially by a factor of two within the range of parameters considered here, when the concentration difference between the two phases is decreased.
Type of Study: Research |
Subject:
Special
Received: 2019/10/1 | Accepted: 2019/12/2 | Published: 2021/02/28
Received: 2019/10/1 | Accepted: 2019/12/2 | Published: 2021/02/28
Send email to the article author
