Volume 5, Issue 1 ((Journal OF Welding Science and Technology 2019)
JWSTI 2019, 5(1): 137-149 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Tamasgavabari R, Ebrahimi A, Abbasi S M. Effect of Harmonic Vibration on Microstructure and Mechanical Properties of AA-5083-H321 Aluminum Alloy GMAW Welds. JWSTI 2019; 5 (1) :137-149
URL: http://jwsti.iut.ac.ir/article-1-263-en.html
URL: http://jwsti.iut.ac.ir/article-1-263-en.html
1- Metallic Materials Research Center, Malek Ashtar University of Technology, Tehran, Iran
2- Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran
2- Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran
Abstract: (6957 Views)
In this research, the effect of vibration at the resonant range (75 Hz) on the hardness and tensile strength of AA-5083-H321 aluminum alloy, were welded by gas metal arc welding (GMAW) investigated. Vibration forces were ranged from 850 N to 2200 N, under identical welding parameters. Tensile strength and hardness testing of welded samples were performed. After mechanical tests, the fracture surfaces of welds were examined using scanning electron microscope (SEM) and discussed. The results showed that with increasing vibration force, the tensile strength and fracture strength of the specimens were welded during vibration, were increased by about 3 and 9 percent, respectively, compared to the non-vibrated weld sample. However, no significant change was observed in the hardness of the welded specimens. Mean grains size and heat affected zone of the sample was welded was welded with conventional GMAW, were about 200 μm and 1800 μm, but due to inducing vibration, as vibration force increased from 850 N to N 2200 N, Mean grains size was reduced to about 75 μm and HAZ was reduced from about 1000 μm to 700 μm, that is, about 44 to 61%.
Keywords: Vibration weld conditioning (VWC), Aluminum Alloy Welding, Hardness Test, Tensile Strength, 5083 Aluminum Alloy
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
